Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) client-ip=2620:137:e000::1:18;
From:   <gabriel.fernandez@foss.st.com>
To:     Michael Turquette <mturquette@baylibre.com>,
        Stephen Boyd <sboyd@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
        Maxime Coquelin <mcoquelin.stm32@gmail.com>,
        Alexandre Torgue <alexandre.torgue@foss.st.com>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        Gabriel Fernandez <gabriel.fernandez@foss.st.com>
CC:     <linux-clk@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-stm32@st-md-mailman.stormreply.com>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>
Subject: [PATCH RESEND v3 13/13] ARM: dts: stm32: add RCC on STM32MP13x SoC family
Date:   Wed, 16 Mar 2022 14:10:00 +0100
Message-ID: <20220316131000.9874-14-gabriel.fernandez@foss.st.com>
In-Reply-To: <20220316131000.9874-1-gabriel.fernandez@foss.st.com>
References: <20220316131000.9874-1-gabriel.fernandez@foss.st.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

From: Gabriel Fernandez <gabriel.fernandez@foss.st.com>

Enables Reset and Clocks Controller on STM32MP13

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
---
 arch/arm/boot/dts/stm32mp131.dtsi  | 107 +++++++++++------------------
 arch/arm/boot/dts/stm32mp133.dtsi  |   4 +-
 arch/arm/boot/dts/stm32mp13xf.dtsi |   3 +-
 3 files changed, 46 insertions(+), 68 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
index 78eac53224d4..d7300b00ec19 100644
--- a/arch/arm/boot/dts/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/stm32mp131.dtsi
@@ -4,6 +4,8 @@
  * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
  */
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/stm32mp13-clks.h>
+#include <dt-bindings/reset/stm32mp13-resets.h>
 
 / {
 	#address-cells = <1>;
@@ -64,54 +66,8 @@ scmi_reset: protocol@16 {
 			};
 		};
 	};
-	clocks {
-		clk_axi: clk-axi {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <266500000>;
-		};
-
-		clk_hse: clk-hse {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-
-		clk_hsi: clk-hsi {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <64000000>;
-		};
-
-		clk_lsi: clk-lsi {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32000>;
-		};
-
-		clk_pclk3: clk-pclk3 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104438965>;
-		};
 
-		clk_pclk4: clk-pclk4 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <133250000>;
-		};
-
-		clk_pll4_p: clk-pll4_p {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-		};
-
-		clk_pll4_r: clk-pll4_r {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <99000000>;
-		};
+	clocks {
 	};
 
 	intc: interrupt-controller@a0021000 {
@@ -148,7 +104,8 @@ uart4: serial@40010000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x40010000 0x400>;
 			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_hsi>;
+			clocks = <&rcc UART4_K>;
+			resets = <&rcc UART4_R>;
 			status = "disabled";
 		};
 
@@ -163,7 +120,8 @@ dma1: dma-controller@48000000 {
 				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_pclk4>;
+			clocks = <&rcc DMA1>;
+			resets = <&rcc DMA1_R>;
 			#dma-cells = <4>;
 			st,mem2mem;
 			dma-requests = <8>;
@@ -180,7 +138,8 @@ dma2: dma-controller@48001000 {
 				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_pclk4>;
+			clocks = <&rcc DMA2>;
+			resets = <&rcc DMA2_R>;
 			#dma-cells = <4>;
 			st,mem2mem;
 			dma-requests = <8>;
@@ -189,13 +148,29 @@ dma2: dma-controller@48001000 {
 		dmamux1: dma-router@48002000 {
 			compatible = "st,stm32h7-dmamux";
 			reg = <0x48002000 0x40>;
-			clocks = <&clk_pclk4>;
+			clocks = <&rcc DMAMUX1>;
+			resets = <&rcc DMAMUX1_R>;
 			#dma-cells = <3>;
 			dma-masters = <&dma1 &dma2>;
 			dma-requests = <128>;
 			dma-channels = <16>;
 		};
 
+		rcc: rcc@50000000 {
+			compatible = "st,stm32mp13-rcc", "syscon";
+			reg = <0x50000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+
+			clock-names = "hse", "hsi", "csi", "lse", "lsi";
+
+			clocks = <&scmi_clk CK_SCMI_HSE>,
+				 <&scmi_clk CK_SCMI_HSI>,
+				 <&scmi_clk CK_SCMI_CSI>,
+				 <&scmi_clk CK_SCMI_LSE>,
+				 <&scmi_clk CK_SCMI_LSI>;
+		};
+
 		exti: interrupt-controller@5000d000 {
 			compatible = "st,stm32mp13-exti", "syscon";
 			interrupt-controller;
@@ -206,14 +181,14 @@ exti: interrupt-controller@5000d000 {
 		syscfg: syscon@50020000 {
 			compatible = "st,stm32mp157-syscfg", "syscon";
 			reg = <0x50020000 0x400>;
-			clocks = <&clk_pclk3>;
+			clocks = <&rcc SYSCFG>;
 		};
 
 		mdma: dma-controller@58000000 {
 			compatible = "st,stm32h7-mdma";
 			reg = <0x58000000 0x1000>;
 			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_pclk4>;
+			clocks = <&rcc MDMA>;
 			#dma-cells = <5>;
 			dma-channels = <32>;
 			dma-requests = <48>;
@@ -225,8 +200,9 @@ sdmmc1: mmc@58005000 {
 			reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "cmd_irq";
-			clocks = <&clk_pll4_p>;
+			clocks = <&rcc SDMMC1_K>;
 			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC1_R>;
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
 			max-frequency = <130000000>;
@@ -239,8 +215,9 @@ sdmmc2: mmc@58007000 {
 			reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "cmd_irq";
-			clocks = <&clk_pll4_p>;
+			clocks = <&rcc SDMMC2_K>;
 			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC2_R>;
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
 			max-frequency = <130000000>;
@@ -250,7 +227,7 @@ sdmmc2: mmc@58007000 {
 		iwdg2: watchdog@5a002000 {
 			compatible = "st,stm32mp1-iwdg";
 			reg = <0x5a002000 0x400>;
-			clocks = <&clk_pclk4>, <&clk_lsi>;
+			clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
 			clock-names = "pclk", "lsi";
 			status = "disabled";
 		};
@@ -289,7 +266,7 @@ gpioa: gpio@50002000 {
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x0 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOA>;
 				st,bank-name = "GPIOA";
 				ngpios = <16>;
 				gpio-ranges = <&pinctrl 0 0 16>;
@@ -301,7 +278,7 @@ gpiob: gpio@50003000 {
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x1000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOB>;
 				st,bank-name = "GPIOB";
 				ngpios = <16>;
 				gpio-ranges = <&pinctrl 0 16 16>;
@@ -313,7 +290,7 @@ gpioc: gpio@50004000 {
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x2000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOC>;
 				st,bank-name = "GPIOC";
 				ngpios = <16>;
 				gpio-ranges = <&pinctrl 0 32 16>;
@@ -325,7 +302,7 @@ gpiod: gpio@50005000 {
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x3000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOD>;
 				st,bank-name = "GPIOD";
 				ngpios = <16>;
 				gpio-ranges = <&pinctrl 0 48 16>;
@@ -337,7 +314,7 @@ gpioe: gpio@50006000 {
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x4000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOE>;
 				st,bank-name = "GPIOE";
 				ngpios = <16>;
 				gpio-ranges = <&pinctrl 0 64 16>;
@@ -349,7 +326,7 @@ gpiof: gpio@50007000 {
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x5000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOF>;
 				st,bank-name = "GPIOF";
 				ngpios = <16>;
 				gpio-ranges = <&pinctrl 0 80 16>;
@@ -361,7 +338,7 @@ gpiog: gpio@50008000 {
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x6000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOG>;
 				st,bank-name = "GPIOG";
 				ngpios = <16>;
 				gpio-ranges = <&pinctrl 0 96 16>;
@@ -373,7 +350,7 @@ gpioh: gpio@50009000 {
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x7000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOH>;
 				st,bank-name = "GPIOH";
 				ngpios = <15>;
 				gpio-ranges = <&pinctrl 0 112 15>;
@@ -385,7 +362,7 @@ gpioi: gpio@5000a000 {
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x8000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOI>;
 				st,bank-name = "GPIOI";
 				ngpios = <8>;
 				gpio-ranges = <&pinctrl 0 128 8>;
diff --git a/arch/arm/boot/dts/stm32mp133.dtsi b/arch/arm/boot/dts/stm32mp133.dtsi
index 0fb1386257cf..531c263c9f46 100644
--- a/arch/arm/boot/dts/stm32mp133.dtsi
+++ b/arch/arm/boot/dts/stm32mp133.dtsi
@@ -15,7 +15,7 @@ m_can1: can@4400e000 {
 			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "int0", "int1";
-			clocks = <&clk_hse>, <&clk_pll4_r>;
+			clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>;
 			clock-names = "hclk", "cclk";
 			bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
 			status = "disabled";
@@ -28,7 +28,7 @@ m_can2: can@4400f000 {
 			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "int0", "int1";
-			clocks = <&clk_hse>, <&clk_pll4_r>;
+			clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>;
 			clock-names = "hclk", "cclk";
 			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
 			status = "disabled";
diff --git a/arch/arm/boot/dts/stm32mp13xf.dtsi b/arch/arm/boot/dts/stm32mp13xf.dtsi
index fa6889e30591..4d00e7592882 100644
--- a/arch/arm/boot/dts/stm32mp13xf.dtsi
+++ b/arch/arm/boot/dts/stm32mp13xf.dtsi
@@ -10,7 +10,8 @@ cryp: crypto@54002000 {
 			compatible = "st,stm32mp1-cryp";
 			reg = <0x54002000 0x400>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_axi>;
+			clocks = <&rcc CRYP1>;
+			resets = <&rcc CRYP1_R>;
 			status = "disabled";
 		};
 	};
-- 
2.25.1