Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
From:   Li Yang <leoyang.li@nxp.com>
To:     Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>,
        Rob Herring <robh+dt@kernel.org>
Cc:     linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH 3/6] arm64: dts: ls2080a-rdb: add phy nodes
Date:   Thu, 17 Mar 2022 14:01:06 -0500
Message-Id: <20220317190109.3742-3-leoyang.li@nxp.com>
In-Reply-To: <20220317190109.3742-1-leoyang.li@nxp.com>
References: <20220317190109.3742-1-leoyang.li@nxp.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Define PHY nodes on the board.

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 .../boot/dts/freescale/fsl-ls2080a-rdb.dts    | 68 +++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
index 44894356059c..1c8c99a74071 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -23,3 +23,71 @@ chosen {
 		stdout-path = "serial1:115200n8";
 	};
 };
+
+&dpmac5 {
+	phy-handle = <&mdio2_phy1>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac6 {
+	phy-handle = <&mdio2_phy2>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac7 {
+	phy-handle = <&mdio2_phy3>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac8 {
+	phy-handle = <&mdio2_phy4>;
+	phy-connection-type = "10gbase-r";
+};
+
+&emdio1 {
+	status = "disabled";
+
+	/* CS4340 PHYs */
+	mdio1_phy1: emdio1_phy@1 {
+		reg = <0x10>;
+	};
+
+	mdio1_phy2: emdio1_phy@2 {
+		reg = <0x11>;
+	};
+
+	mdio1_phy3: emdio1_phy@3 {
+		reg = <0x12>;
+	};
+
+	mdio1_phy4: emdio1_phy@4 {
+		reg = <0x13>;
+	};
+};
+
+&emdio2 {
+	/* AQR405 PHYs */
+	mdio2_phy1: emdio2_phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <0 1 0x4>; /* Level high type */
+		reg = <0x0>;
+	};
+
+	mdio2_phy2: emdio2_phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <0 2 0x4>; /* Level high type */
+		reg = <0x1>;
+	};
+
+	mdio2_phy3: emdio2_phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <0 4 0x4>; /* Level high type */
+		reg = <0x2>;
+	};
+
+	mdio2_phy4: emdio2_phy@4 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <0 5 0x4>; /* Level high type */
+		reg = <0x3>;
+	};
+};
-- 
2.25.1