Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
MIME-Version: 1.0
In-Reply-To: <1647452154-16361-4-git-send-email-quic_sbillaka@quicinc.com>
References: <1647452154-16361-1-git-send-email-quic_sbillaka@quicinc.com> <1647452154-16361-4-git-send-email-quic_sbillaka@quicinc.com>
From:   Stephen Boyd <swboyd@chromium.org>
User-Agent: alot/0.10
Date:   Thu, 17 Mar 2022 17:28:25 -0400
Message-ID: <CAE-0n51SCm2HJ4O-DPJy3zKLrbgn9EFQbYPkzJDyqNncnC=4mA@mail.gmail.com>
Subject: Re: [PATCH v5 3/9] arm64: dts: qcom: sc7280: Enable backlight for eDP panel
To:     Sankeerth Billakanti <quic_sbillaka@quicinc.com>,
        devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org,
        freedreno@lists.freedesktop.org, linux-arm-msm@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     robdclark@gmail.com, seanpaul@chromium.org,
        quic_kalyant@quicinc.com, quic_abhinavk@quicinc.com,
        dianders@chromium.org, quic_khsieh@quicinc.com, agross@kernel.org,
        bjorn.andersson@linaro.org, robh+dt@kernel.org, krzk+dt@kernel.org,
        sean@poorly.run, airlied@linux.ie, daniel@ffwll.ch,
        thierry.reding@gmail.com, sam@ravnborg.org,
        dmitry.baryshkov@linaro.org, quic_vproddut@quicinc.com
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

Quoting Sankeerth Billakanti (2022-03-16 10:35:48)
> Enable backlight support for eDP panel on CRD platform for sc7280.
>
> Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
> ---
>
> Changes in v5:
>   - Separate out backlight nodes
>
>  arch/arm64/boot/dts/qcom/sc7280-crd.dts | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
> index 2df654e..16d1a5b 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
> @@ -37,6 +37,15 @@
>                 pinctrl-0 = <&edp_panel_power>;
>         };
>
> +       edp_backlight: edp-backlight {

Does this also move to qcard.dtsi? Why can't this be combined with the
previous patch?

> +               compatible = "pwm-backlight";
> +
> +               power-supply = <&vreg_edp_bp>;
> +               pwms = <&pm8350c_pwm 3 65535>;
> +
> +               enable-gpios = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;
> +       };
> +
>         vreg_edp_bp: vreg-edp-bp-regulator {
>                 compatible = "regulator-fixed";
>                 regulator-name = "vreg_edp_bp";
> @@ -123,7 +132,9 @@ ap_ts_pen_1v8: &i2c13 {
>                 edp_panel: edp-panel {
>                         compatible = "edp-panel";
>
> +                       backlight = <&edp_backlight>;
>                         power-supply = <&edp_3v3_regulator>;
> +

Nitpick: Remove this newline from this hunk and put it in when
power-supply is introduced.

>                         ports {
>                                 #address-cells = <1>;
>                                 #size-cells = <0>;
> @@ -172,6 +183,13 @@ ap_ts_pen_1v8: &i2c13 {
>         };
>  };
>
> +&pm8350c_pwm {
> +       status = "okay";
> +
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&edp_bl_pwm>;

I see the pinctrl is used now but it would be easier to review this
patch if the pinctrl was in this patch.