Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
MIME-Version: 1.0
References: <20220322080213.1487134-1-xji@analogixsemi.com> <CAJMQK-j+PhB6dZBuKG3NtW94oT0bVkp9G1bXhmyZLgYOmTCgog@mail.gmail.com>
In-Reply-To: <CAJMQK-j+PhB6dZBuKG3NtW94oT0bVkp9G1bXhmyZLgYOmTCgog@mail.gmail.com>
From:   Pin-yen Lin <treapking@chromium.org>
Date:   Tue, 22 Mar 2022 16:52:08 +0800
Message-ID: <CAEXTbpc2zFmKWGtP-fDa=96rwGWjKT7YJOMRceBbrbTsGvzOGQ@mail.gmail.com>
Subject: Re: [PATCH v2] drm/bridge: anx7625: Set downstream sink into normal status
To:     Hsin-Yi Wang <hsinyi@chromium.org>
Cc:     Xin Ji <xji@analogixsemi.com>,
        Andrzej Hajda <andrzej.hajda@intel.com>,
        Neil Armstrong <narmstrong@baylibre.com>,
        Robert Foss <robert.foss@linaro.org>,
        Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
        Jonas Karlman <jonas@kwiboo.se>,
        Jernej Skrabec <jernej.skrabec@gmail.com>,
        David Airlie <airlied@linux.ie>,
        Daniel Vetter <daniel@ffwll.ch>, bliang@analogixsemi.com,
        qwen@analogixsemi.com, pihsun@chromium.org, tzungbi@google.com,
        dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

The DRM_DEV_* macros have been deprecated:
https://www.kernel.org/doc/html/latest/gpu/drm-internals.html#c.DRM_DEV_DEBUG_DRIVER

On Tue, Mar 22, 2022 at 4:43 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> On Tue, Mar 22, 2022 at 4:02 PM Xin Ji <xji@analogixsemi.com> wrote:
> >
> > As downstream sink was set into standby mode while bridge disabled,
> > this patch used for setting downstream sink into normal status
> > while enable bridge.
> >
> > Signed-off-by: Xin Ji <xji@analogixsemi.com>
> > Reviewed-by: Pin-Yen Lin <treapking@chromium.org>
> >
> > ---
> > V1 -> V2: use dev_dbg replace of dev_info
> > ---
> >  drivers/gpu/drm/bridge/analogix/anx7625.c | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > index 9a2a19ad4202..dcf3275a00fe 100644
> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > @@ -924,12 +924,20 @@ static void anx7625_dp_start(struct anx7625_data *ctx)
> >  {
> >         int ret;
> >         struct device *dev = &ctx->client->dev;
> > +       u8 data;
> >
> >         if (!ctx->display_timing_valid) {
> >                 DRM_DEV_ERROR(dev, "mipi not set display timing yet.\n");
> >                 return;
> >         }
> >
> > +       dev_dbg(dev, "set downstream sink into normal\n");
> > +       /* Downstream sink enter into normal mode */
> > +       data = 1;
> > +       ret = anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, 0x000600, 1, &data);
> > +       if (ret < 0)
> > +               dev_err(dev, "IO error : set sink into normal mode fail\n");
> > +
>
> The driver uses DRM_DEV_* for logs. Can we use this?
>
> >         /* Disable HDCP */
> >         anx7625_write_and(ctx, ctx->i2c.rx_p1_client, 0xee, 0x9f);
> >
> > --
> > 2.25.1
> >