Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Robert Marko <robert.marko@sartura.hr>
To:     andrew@lunn.ch, gregory.clement@bootlin.com,
        sebastian.hesselbarth@gmail.com, robh+dt@kernel.org,
        linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, pali@kernel.org, marek.behun@nic.cz
Cc:     Robert Marko <robert.marko@sartura.hr>
Subject: [PATCH v2 2/2] arm64: dts: uDPU: correct temperature sensors
Date:   Tue, 22 Mar 2022 11:58:57 +0100
Message-Id: <20220322105857.1107016-2-robert.marko@sartura.hr>
In-Reply-To: <20220322105857.1107016-1-robert.marko@sartura.hr>
References: <20220322105857.1107016-1-robert.marko@sartura.hr>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

uDPU has a pair of NCT375 temperature sensors, which are TMP75C compatible
as far as the driver is concerned.

The current LM75 compatible worked as all of the LM75 compatible sensors
are backwards compatible with the original part, but it meant that lower
resolution and incorrect sample rate was being used.

The "lm75" compatible has been deprecated anyway and is meant as fallback
in order to keep older DTS-es working.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
---
Changes in v2:
* None
---
 arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
index ac64949bb53e..1f534c0c65f7 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -153,15 +153,15 @@ &i2c1 {
 	scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
-	lm75@48 {
+	nct375@48 {
 		status = "okay";
-		compatible = "lm75";
+		compatible = "ti,tmp75c";
 		reg = <0x48>;
 	};
 
-	lm75@49 {
+	nct375@49 {
 		status = "okay";
-		compatible = "lm75";
+		compatible = "ti,tmp75c";
 		reg = <0x49>;
 	};
 };
-- 
2.35.1