Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) client-ip=2620:137:e000::1:18;
Received-SPF: Pass (protection.outlook.com: domain of in.bosch.com designates
 139.15.153.199 as permitted sender) receiver=protection.outlook.com;
 client-ip=139.15.153.199; helo=eop.bosch-org.com;
From:   <Gireesh.Hiremath@in.bosch.com>
To:     <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-omap@vger.kernel.org>, <robh+dt@kernel.org>,
        <tony@atomide.com>, <bcousson@baylibre.com>
CC:     <sjoerd.simons@collabora.co.uk>, <VinayKumar.Shettar@in.bosch.com>,
        <Govindaraji.Sivanantham@in.bosch.com>,
        <anaclaudia.dias@de.bosch.com>, <Gireesh.Hiremath@in.bosch.com>
Subject: [PATCH 10/15] ARM: dts: am335x: Guardian: Update backlight parameter
Date:   Fri, 25 Mar 2022 10:06:08 +0000
Message-ID: <20220325100613.1494-11-Gireesh.Hiremath@in.bosch.com>
In-Reply-To: <20220325100613.1494-1-Gireesh.Hiremath@in.bosch.com>
References: <20220325100613.1494-1-Gireesh.Hiremath@in.bosch.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 25 Mar 2022 10:06:55.5868
 (UTC)
X-MS-Exchange-CrossTenant-Network-Message-Id: 2cd06a8b-226e-41fb-d59d-08da0e47312e
X-MS-Exchange-CrossTenant-Id: 0ae51e19-07c8-4e4b-bb6d-648ee58410f4
X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=0ae51e19-07c8-4e4b-bb6d-648ee58410f4;Ip=[139.15.153.199];Helo=[eop.bosch-org.com]
X-MS-Exchange-CrossTenant-AuthSource: DB5EUR03FT044.eop-EUR03.prod.protection.outlook.com
X-MS-Exchange-CrossTenant-AuthAs: Anonymous
X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem
X-MS-Exchange-Transport-CrossTenantHeadersStamped: DB8PR10MB3513
X-Spam-Status: No, score=-2.0 required=5.0 tests=BAYES_00,DKIM_SIGNED,
	DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,
	MAILING_LIST_MULTI,RDNS_NONE,SPF_HELO_NONE,T_SCC_BODY_TEXT_LINE
	autolearn=no autolearn_force=no version=3.4.6
X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on
	lindbergh.monkeyblade.net
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

From: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>

 * Update default brightness and dimming frequency
 * Enable current sink, while initialization

Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
---
 arch/arm/boot/dts/am335x-guardian.dts | 31 +++++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts
index 75ac8686091a..fab844815065 100644
--- a/arch/arm/boot/dts/am335x-guardian.dts
+++ b/arch/arm/boot/dts/am335x-guardian.dts
@@ -291,14 +291,34 @@
 #include "tps65217.dtsi"
 
 &tps {
+  /*
+   * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+   * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
+   * mode and risk hardware damage if this mode is entered.
+   *
+   * For details, see linux-omap mailing list May 2015 thread
+   *  [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+   * In particular, messages:
+   *  http://www.spinics.net/lists/linux-omap/msg118585.html
+   *  http://www.spinics.net/lists/linux-omap/msg118615.html
+   *
+   * You can override this later with
+   *  &tps {  /delete-property/ ti,pmic-shutdown-controller;  }
+   * if you want to use RTC-only mode and made sure you are not affected
+   * by the hardware problems. (Tip: double-check by performing a current
+   * measurement after shutdown: it should be less than 1 mA.)
+   */
 	ti,pmic-shutdown-controller;
 	interrupt-parent = <&intc>;
 	interrupts = <7>; /* NMI */
 
 	backlight {
 		isel = <1>;  /* 1 - ISET1, 2 ISET2 */
-		fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
-		default-brightness = <100>;
+		fdim = <500>; /* TPS65217_BL_FDIM_500HZ */
+		default-brightness = <50>;
+		/* 1(on) - enable current sink, while initialization */
+		/* 0(off) - disable current sink, while initialization */
+		isink-en = <1>;
 	};
 
 	regulators {
@@ -408,6 +428,13 @@
 		>;
 	};
 
+	led_bl_pins: gpio_led_bl_pins {
+		pinctrl-single,pins = <
+			/* P9_14, gpmc_a[2].GPIO1[18] (backlight control) */
+			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7)
+		>;
+	};
+
 	lcd_disen_pins: pinmux_lcd_disen_pins {
 		pinctrl-single,pins = <
 			/* P9_27, mcasp0_fsr.gpio3[19] (lcd_disen) */
-- 
2.20.1