Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Vyacheslav Bocharov <adeep@lexina.in>
To:     Neil Armstrong <narmstrong@baylibre.com>,
        Kevin Hilman <khilman@baylibre.com>,
        linux-amlogic@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org
Subject: [PATCH v2 3/4] arm64: meson: update SDIO voltage in dts for JetHub D1
Date:   Sat, 26 Mar 2022 10:51:09 +0300
Message-Id: <20220326075110.1462301-4-adeep@lexina.in>
In-Reply-To: <20220326075110.1462301-1-adeep@lexina.in>
References: <20220326075110.1462301-1-adeep@lexina.in>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Fix the dts to match board's reference design:
- update vddio_boot regulator to 3.3v (Wi-Fi SDIO module)
- add vccq_1v8 regulator with 1.8v for eMMC SDIO

In the first revision of JetHub D1 the vccq_1v8 regulator was 3.3v.
All installed eMMC modules were tested to work in HS200 mode at 3.3v
supply voltage. In the next revisions of the board eMMC will be
powered with 1.8v according to the standard.

Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
---
 .../dts/amlogic/meson-axg-jethome-jethub-j100.dts     | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
index 66c1eeba8f48..e52abffdf8cf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
@@ -81,6 +81,15 @@ vddio_ao18: regulator-vddio_ao18 {
 	vddio_boot: regulator-vddio_boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vccq_1v8: regulator-vccq_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCQ_1V8";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		vin-supply = <&vddao_3v3>;
@@ -282,7 +291,7 @@ &sd_emmc_c {
 	mmc-pwrseq = <&emmc_pwrseq>;
 
 	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&vddio_boot>;
+	vqmmc-supply = <&vccq_1v8>;
 };
 
 /* UART Bluetooth */
-- 
2.30.2