Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932437AbXB1Oit (ORCPT ); Wed, 28 Feb 2007 09:38:49 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932887AbXB1Oit (ORCPT ); Wed, 28 Feb 2007 09:38:49 -0500 Received: from mtl.rackplans.net ([69.90.0.18]:44916 "EHLO mtl.rackplans.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932437AbXB1Oir (ORCPT ); Wed, 28 Feb 2007 09:38:47 -0500 Date: Wed, 28 Feb 2007 09:38:45 -0500 (EST) From: Gerhard Mack X-X-Sender: gmack@mtl.rackplans.net To: Robert Hancock cc: linux-kernel@vger.kernel.org Subject: Re: 2.6.20 SATA error In-Reply-To: <45E58FC7.7020102@shaw.ca> Message-ID: References: <45E58FC7.7020102@shaw.ca> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 28643 Lines: 588 On Wed, 28 Feb 2007, Robert Hancock wrote: > Gerhard Mack wrote: > > hello, > > Can someone tell me what this means? > > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2 frozen > > ata1.00: cmd 35/00:00:40:a6:23/00:04:00:00:00/e0 tag 0 cdb 0x0 data 524288 > > out > > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > > ata1: port is slow to respond, please be patient (Status 0xd0) > > ata1: port failed to respond (30 secs, Status 0xd0) > > ata1: soft resetting port > > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > > ata1.00: configured for UDMA/100 > > ata1: EH complete > > SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) > > sda: Write Protect is off > > sda: Mode Sense: 00 3a 00 00 > > SCSI device sda: write cache: enabled, read cache: enabled, doesn't support > > DPO > > or FUA > > Some command timed out, apparently. From this one can't easily say why. Please > send full dmesg. > Linux version 2.6.20 (root@mgerhard) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #10 SMP PREEMPT Mon Feb 26 14:48:53 EST 2007 Command line: root=/dev/sda3 ro BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003def0000 (usable) BIOS-e820: 000000003def0000 - 000000003def3000 (ACPI NVS) BIOS-e820: 000000003def3000 - 000000003df00000 (ACPI data) BIOS-e820: 000000003e000000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 253680) 1 entries of 256 used end_pfn_map = 1048576 DMI 2.4 present. ACPI: RSDP (v002 Nvidia ) @ 0x00000000000f7560 ACPI: XSDT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003def30c0 ACPI: FADT (v003 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003defb3c0 ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x000000003defb5c0 ACPI: HPET (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000098) @ 0x000000003defb840 ACPI: MCFG (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003defb8c0 ACPI: MADT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003defb500 ACPI: DSDT (v001 NVIDIA ASUSACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 253680) 1 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 253680 On node 0 totalpages: 253583 DMA zone: 56 pages used for memmap DMA zone: 1831 pages reserved DMA zone: 2112 pages, LIFO batch:0 DMA32 zone: 3412 pages used for memmap DMA32 zone: 246172 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10de8201 base: 0xfefff000 Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000f0000 Nosave address range: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) PERCPU: Allocating 33152 bytes of per cpu data Built 1 zonelists. Total pages: 248284 Kernel command line: root=/dev/sda3 ro Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... CPU 0: aperture @ fa9c000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 991204k/1014720k available (3834k kernel code, 22888k reserved, 2637k data, 256k init) Calibrating delay using timer specific routine.. 4413.54 BogoMIPS (lpj=2206772) Security Framework v1.0.0 initialized Capability LSM initialized Failure registering Root Plug module with the kernel Failure registering Root Plug module with primary security module. Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Freeing SMP alternatives: 36k freed ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12526126 Detected 12.526 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4409.15 BogoMIPS (lpj=2204576) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 548 cycles) Brought up 2 CPUs testing NMI watchdog ... OK. time.c: Using 25.000000 MHz WALL HPET GTOD HPET timer. time.c: Detected 2204.598 MHz processor. migration_cost=389 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 PCI: No mmconfig possible on device 00:18 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:05.0 PCI: Transparent bridge - 0000:00:10.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK7] (IRQs 5 *7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. SCSI subsystem initialized libata version 2.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI Interrupt 0000:04:05.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fdbff000-fdbff7ff] Max Packet=[2048] IR/IT contexts=[4/8] PCI: Bridge: 0000:00:02.0 IO window: a000-afff MEM window: fd800000-fd8fffff PREFETCH window: fd700000-fd7fffff PCI: Bridge: 0000:00:03.0 IO window: 8000-8fff MEM window: fde00000-fdefffff PREFETCH window: fdd00000-fddfffff PCI: Bridge: 0000:00:04.0 IO window: b000-bfff MEM window: fdc00000-fdcfffff PREFETCH window: fd900000-fd9fffff PCI: Bridge: 0000:00:10.0 IO window: 9000-9fff MEM window: fdb00000-fdbfffff PREFETCH window: fda00000-fdafffff PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:10.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie03] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie03] PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] Allocate Port Service[0000:00:04.0:pcie03] input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (40 C) Real Time Clock Driver v1.12ac hpet_resources: 0xfefff000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones [drm] Initialized drm 1.1.0 20060810 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using monotonic_clock(). Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:14.0 to 64 forcedeth: using HIGHDMA eth0: forcedeth.c: subsystem: 01043:816a bound to 0000:00:14.0 PPP generic driver version 2.4.2 NET: Registered protocol family 24 Linux Tulip driver version 1.1.14 (May 11, 2002) ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ACPI: PCI Interrupt 0000:04:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 tulip0: MII transceiver #1 config 1000 status 786d advertising 01e1. eth1: ADMtek Comet rev 17 at MMIO 0xfdbfe000, 00:4C:69:6E:75:79, IRQ 16. Linux video capture interface: v2.00 SCSI Media Changer driver v0.25 sata_nv 0000:00:0e.0: version 3.2 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:0e.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE000 irq 22 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE008 irq 22 scsi0 : sata_nv ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7, max UDMA/100, 488397168 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 1 ata1.00: configured for UDMA/100 scsi1 : sata_nv ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000101f761] ata2: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x977 scsi 0:0:0:0: Direct-Access ATA WDC WD2500JS-60N 10.0 PQ: 0 ANSI: 5 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:0f.0 to 64 ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xCC00 irq 21 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xCC08 irq 21 scsi2 : sata_nv ata3: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x9E7 scsi3 : sata_nv ata4: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x967 pata_amd 0000:00:0d.0: version 0.2.7 PCI: Setting latency timer of device 0000:00:0d.0 to 64 ata5: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF400 irq 14 ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xF408 irq 15 scsi4 : pata_amd ata5.00: ATAPI, max UDMA/33 ata5.00: configured for UDMA/33 scsi5 : pata_amd ATA: abnormal status 0x7F on port 0x177 scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sr 4:0:0:0: Attached scsi generic sg1 type 5 video1394: Installed video1394 module ieee1394: raw1394: /dev/raw1394 device initialized ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:0b.1 to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:0b.1 ehci_hcd 0000:00:0b.1: irq 20, io mem 0xfe02e000 ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:0b.0 to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: irq 23, io mem 0xfe02f000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected Initializing USB Mass Storage driver... usb 1-6: new high speed USB device using ehci_hcd and address 3 usb 1-6: configuration #1 chosen from 1 choice usb 2-4: new low speed USB device using ohci_hcd and address 2 usb 2-4: configuration #1 chosen from 1 choice scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver hiddev input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-4 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver usbcore: registered new interface driver catc drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver usbcore: registered new interface driver kaweth pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver usbcore: registered new interface driver pegasus drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27) usbcore: registered new interface driver rtl8150 usbcore: registered new interface driver asix usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver net1080 usbcore: registered new interface driver zaurus serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input3 i2c /dev entries driver i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40 input: AT Translated Set 2 keyboard as /class/input/input4 Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC). ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:10.1 to 64 ALSA device list: #0: HDA NVidia at 0xfe024000 irq 22 netem: version 1.2 u32 classifier Performance counters on OLD policer on nf_conntrack version 0.5.0 (3963 buckets, 31704 max) ip_tables: (C) 2000-2006 Netfilter Core Team ClusterIP Version 0.8 loaded successfully arp_tables: (C) 2002 David S. Miller TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (version 2.00.00) powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8 powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xa powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xc powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found ReiserFS: sda3: found reiserfs format "3.6" with standard journal ReiserFS: sda3: using ordered data mode ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda3: checking transaction log (sda3) ReiserFS: sda3: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 256k freed usb-storage: device scan complete scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 sd 6:0:0:0: Attached scsi removable disk sdb sd 6:0:0:0: Attached scsi generic sg2 type 0 sd 6:0:0:1: Attached scsi removable disk sdc sd 6:0:0:1: Attached scsi generic sg3 type 0 sd 6:0:0:2: Attached scsi removable disk sdd sd 6:0:0:2: Attached scsi generic sg4 type 0 sd 6:0:0:3: Attached scsi removable disk sde sd 6:0:0:3: Attached scsi generic sg5 type 0 Adding 1004052k swap on /dev/sda2. Priority:-1 extents:1 across:1004052k ReiserFS: sda1: found reiserfs format "3.6" with standard journal ReiserFS: sda1: using ordered data mode ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda1: checking transaction log (sda1) ReiserFS: sda1: Using r5 hash to sort names 0000:04:08.0: tulip_stop_rxtx() failed eth1: Setting full-duplex based on MII#1 link partner capability of c1e1. eth1: no IPv6 routers present nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:05.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9746 Fri Dec 15 10:19:35 PST 2006 **WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 0:05.0] forgot to specify physical device; fix it! **WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 0:05.0] forgot to specify physical device; fix it! **WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 0:05.0] forgot to specify physical device; fix it! usb 2-3: new full speed USB device using ohci_hcd and address 3 usb 2-3: configuration #1 chosen from 1 choice cdc_acm 2-3:1.0: ttyACM0: USB ACM device usbcore: registered new interface driver cdc_acm drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters usb 2-3: USB disconnect, address 3 usb 2-3: new full speed USB device using ohci_hcd and address 4 usb 2-3: configuration #1 chosen from 1 choice cdc_acm 2-3:1.0: ttyACM0: USB ACM device usb 2-3: USB disconnect, address 4 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2 frozen ata1.00: cmd 35/00:00:40:a6:23/00:04:00:00:00/e0 tag 0 cdb 0x0 data 524288 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1: port is slow to respond, please be patient (Status 0xd0) ata1: port failed to respond (30 secs, Status 0xd0) ata1: soft resetting port ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/100 ata1: EH complete SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2 frozen ata1.00: cmd 35/00:00:88:e6:23/00:04:00:00:00/e0 tag 0 cdb 0x0 data 524288 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1: port is slow to respond, please be patient (Status 0xd0) ata1: port failed to respond (30 secs, Status 0xd0) ata1: soft resetting port ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/100 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2 frozen ata1.00: cmd 35/00:00:88:e6:23/00:04:00:00:00/e0 tag 0 cdb 0x0 data 524288 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1: port is slow to respond, please be patient (Status 0xd0) ata1: port failed to respond (30 secs, Status 0xd0) ata1: soft resetting port ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/100 ata1: EH complete SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) ata1.00: limiting speed to UDMA/66 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2 frozen ata1.00: cmd 35/00:00:88:de:23/00:04:00:00:00/e0 tag 0 cdb 0x0 data 524288 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1: port is slow to respond, please be patient (Status 0xd0) ata1: port failed to respond (30 secs, Status 0xd0) ata1: soft resetting port ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/66 ata1: EH complete sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 ata1.00: limiting speed to UDMA/44 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2 frozen ata1.00: cmd 35/00:00:70:ec:23/00:04:00:00:00/e0 tag 0 cdb 0x0 data 524288 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1: port is slow to respond, please be patient (Status 0xd0) ata1: port failed to respond (30 secs, Status 0xd0) ata1: soft resetting port ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/44 ata1: EH complete ata1.00: limiting speed to UDMA/33 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2 frozen ata1.00: cmd 35/00:00:70:ec:23/00:04:00:00:00/e0 tag 0 cdb 0x0 data 524288 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1: port is slow to respond, please be patient (Status 0xd0) ata1: port failed to respond (30 secs, Status 0xd0) ata1: soft resetting port ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/33 ata1: EH complete SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1.00: limiting speed to UDMA/25 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2 frozen ata1.00: cmd 35/00:00:d8:16:24/00:04:00:00:00/e0 tag 0 cdb 0x0 data 524288 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1: port is slow to respond, please be patient (Status 0xd0) ata1: port failed to respond (30 secs, Status 0xd0) ata1: soft resetting port ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/25 ata1: EH complete SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1.00: limiting speed to UDMA/16 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2 frozen ata1.00: cmd ca/00:18:00:4f:1b/00:00:00:00:00/e6 tag 0 cdb 0x0 data 12288 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1: port is slow to respond, please be patient (Status 0xd0) ata1: port failed to respond (30 secs, Status 0xd0) ata1: soft resetting port ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/16 ata1: EH complete SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1.00: limiting speed to PIO4 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2 frozen ata1.00: cmd 35/00:b8:48:50:07/00:00:15:00:00/e0 tag 0 cdb 0x0 data 94208 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1: port is slow to respond, please be patient (Status 0xd0) ata1: port failed to respond (30 secs, Status 0xd0) ata1: soft resetting port ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for PIO4 ata1: EH complete SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA -- Gerhard Mack gmack@innerfire.net <>< As a computer I find your faith in technology amusing. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/