Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) client-ip=2620:137:e000::1:18;
From:   Michael Walle <michael@walle.cc>
To:     Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc:     linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, Michael Walle <michael@walle.cc>
Subject: [PATCH] arm64: dts: ls1028a: default to OTG mode for USB
Date:   Wed, 30 Mar 2022 13:34:42 +0200
Message-Id: <20220330113442.3402940-1-michael@walle.cc>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

At the moment, the dtsi will force the dr_mode to host. This is
problematic because it will always turn on the Vbus voltage regardless
if the port is host or device. This might lead to a "shortcut" between
the two USB endpoints because both might have their Vbus supplies
enabled. Therefore, the default should be "otg" for any ports which
aren't host only (from a SoC point of view) and have a user of the dtsi
file overwrite that explicitly.

Move the 'dr_mode = "host";' into the board dts. Now that the dtsi
doesn't set the dr_mode anymore, we can also drop the 'dr_mode = "otg";'
in the board dts because that is the default value if dr_mode is not
set.

Signed-off-by: Michael Walle <michael@walle.cc>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts | 1 +
 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts          | 2 ++
 arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts          | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi             | 2 --
 4 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index fef1bb585dce..68d11a9c67f3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -341,5 +341,6 @@ &usb0 {
 };
 
 &usb1 {
+	dr_mode = "host";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 19d3952dbffe..5baf060acf93 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -382,9 +382,11 @@ &sata {
 };
 
 &usb0 {
+	dr_mode = "host";
 	status = "okay";
 };
 
 &usb1 {
+	dr_mode = "host";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 68c31cb8eead..e0cd1516d05b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -299,10 +299,10 @@ &sata {
 };
 
 &usb0 {
+	dr_mode = "host";
 	status = "okay";
 };
 
 &usb1 {
-	dr_mode = "otg";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 088271d49139..92465f777603 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -599,7 +599,6 @@ usb0: usb@3100000 {
 			compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
 			reg = <0x0 0x3100000 0x0 0x10000>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			dr_mode = "host";
 			snps,dis_rxdet_inp3_quirk;
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
@@ -610,7 +609,6 @@ usb1: usb@3110000 {
 			compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
 			reg = <0x0 0x3110000 0x0 0x10000>;
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-			dr_mode = "host";
 			snps,dis_rxdet_inp3_quirk;
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-- 
2.30.2