Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Mon, 11 Apr 2022 08:54:28 +0800
From:   Shawn Guo <shawnguo@kernel.org>
To:     Michael Walle <michael@walle.cc>
Cc:     Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzk+dt@kernel.org>,
        linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: ls1028a: default to OTG mode for USB
Message-ID: <20220411005428.GV129381@dragon>
References: <20220330113442.3402940-1-michael@walle.cc>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20220330113442.3402940-1-michael@walle.cc>
Precedence: bulk

On Wed, Mar 30, 2022 at 01:34:42PM +0200, Michael Walle wrote:
> At the moment, the dtsi will force the dr_mode to host. This is
> problematic because it will always turn on the Vbus voltage regardless
> if the port is host or device. This might lead to a "shortcut" between
> the two USB endpoints because both might have their Vbus supplies
> enabled. Therefore, the default should be "otg" for any ports which
> aren't host only (from a SoC point of view) and have a user of the dtsi
> file overwrite that explicitly.
> 
> Move the 'dr_mode = "host";' into the board dts. Now that the dtsi
> doesn't set the dr_mode anymore, we can also drop the 'dr_mode = "otg";'
> in the board dts because that is the default value if dr_mode is not
> set.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>

Applied, thanks!