Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Sander Vanheule <sander@svanheule.net>
To:     linux-gpio@vger.kernel.org, devicetree@vger.kernel.org
Cc:     Linus Walleij <linus.walleij@linaro.org>,
        Bartosz Golaszewski <brgl@bgdev.pl>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzk+dt@kernel.org>,
        Sander Vanheule <sander@svanheule.net>,
        Bert Vermeulen <bert@biot.com>, linux-kernel@vger.kernel.org
Subject: [PATCH v1 0/6] Support for RTL930x/RTL931x GPIOs
Date:   Sat,  9 Apr 2022 21:55:45 +0200
Message-Id: <cover.1649533972.git.sander@svanheule.net>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

This patch series adds support for the GPIO controllers as found on the
RTL930x and RTL931x SoC families of MIPS CPUs, used in managed NBase-T
ethernet switches.

The RTL931x's GPIO controller behaves the same as the one in the older
RTL838x and RTL839x series. This controller is trivially supported.

The RTL930x's controller has a reversed port order, and supports CPU
affinity settings for individual GPIO line IRQs, thus requiring two
additional changes to implement these features.

Sander Vanheule (6):
  dt-bindings: gpio: realtek-otto: Add rtl9300 compatible
  gpio: realtek-otto: Support reversed port layouts
  gpio: realtek-otto: Support per-cpu interrupts
  gpio: realtek-otto: Add RTL930x support
  dt-bindings: gpio: realtek-otto: Add rtl9310 compatible
  gpio: realtek-otto: Add RTL931x support

 .../bindings/gpio/realtek,otto-gpio.yaml      |  34 ++++-
 drivers/gpio/gpio-realtek-otto.c              | 137 +++++++++++++++++-
 2 files changed, 164 insertions(+), 7 deletions(-)

-- 
2.35.1