Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
Date:   Tue, 12 Apr 2022 11:15:10 -0700
From:   Bjorn Andersson <bjorn.andersson@linaro.org>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc:     Andy Gross <agross@kernel.org>,
        Michael Turquette <mturquette@baylibre.com>,
        Stephen Boyd <sboyd@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Viresh Kumar <vireshk@kernel.org>, Nishanth Menon <nm@ti.com>,
        Alim Akhtar <alim.akhtar@samsung.com>,
        Avri Altman <avri.altman@wdc.com>,
        "James E.J. Bottomley" <jejb@linux.ibm.com>,
        "Martin K. Petersen" <martin.petersen@oracle.com>,
        "Rafael J. Wysocki" <rafael@kernel.org>,
        Taniya Das <tdas@codeaurora.org>,
        linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-pm@vger.kernel.org, linux-scsi@vger.kernel.org
Subject: Re: [RFC PATCH v2 5/6] ufs: use PM OPP when scaling gears
Message-ID: <YlXBropALLWVXcD4@ripper>
References: <20220411154347.491396-1-krzysztof.kozlowski@linaro.org>
 <20220411154347.491396-6-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20220411154347.491396-6-krzysztof.kozlowski@linaro.org>
Precedence: bulk

On Mon 11 Apr 08:43 PDT 2022, Krzysztof Kozlowski wrote:

> Scaling gears requires not only scaling clocks, but also voltage levels,
> e.g. via performance states.
> 
> Use the provided OPP table, to set proper OPP frequency which through
> required-opps will trigger performance state change.  This deprecates
> the old freq-table-hz Devicetree property and old clock scaling method
> in favor of PM core code.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  drivers/scsi/ufs/ufshcd-pltfrm.c |  69 +++++++++++++++++++
>  drivers/scsi/ufs/ufshcd.c        | 115 +++++++++++++++++++++++--------
>  drivers/scsi/ufs/ufshcd.h        |   4 ++
>  3 files changed, 158 insertions(+), 30 deletions(-)
> 
> diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
> index c1d8b6f46868..edba585db0c1 100644
> --- a/drivers/scsi/ufs/ufshcd-pltfrm.c
> +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
> @@ -107,6 +107,69 @@ static int ufshcd_parse_clock_info(struct ufs_hba *hba)
>  	return ret;
>  }
>  
> +static int ufshcd_parse_operating_points(struct ufs_hba *hba)
> +{
> +	struct device *dev = hba->dev;
> +	struct device_node *np = dev->of_node;
> +	struct ufs_clk_info *clki;
> +	const char *names[16];
> +	bool clocks_done;
> +	int cnt, i, ret;
> +
> +	if (!of_find_property(dev->of_node, "operating-points-v2", NULL))
> +		return 0;
> +
> +	cnt = of_property_count_strings(np, "clock-names");
> +	if (cnt <= 0) {
> +		dev_warn(dev, "%s: Missing clock-names\n",
> +			 __func__);
> +		return -EINVAL;
> +	}
> +
> +	if (cnt > ARRAY_SIZE(names)) {
> +		dev_info(dev, "%s: Too many clock-names\n",  __func__);
> +		return -EINVAL;
> +	}
> +
> +	/* clocks parsed by ufshcd_parse_clock_info() */
> +	clocks_done = !!of_find_property(np, "freq-table-hz", NULL);
> +
> +	for (i = 0; i < cnt; i++) {
> +		ret = of_property_read_string_index(np, "clock-names", i,
> +						    &names[i]);
> +		if (ret)
> +			return ret;
> +
> +		if (clocks_done)
> +			continue;
> +
> +		clki = devm_kzalloc(dev, sizeof(*clki), GFP_KERNEL);
> +		if (!clki)
> +			return -ENOMEM;
> +
> +		clki->name = devm_kstrdup(dev, names[i], GFP_KERNEL);
> +		if (!clki->name)
> +			return -ENOMEM;
> +
> +		if (!strcmp(names[i], "ref_clk"))
> +			clki->keep_link_active = true;
> +
> +		list_add_tail(&clki->list, &hba->clk_list_head);
> +	}
> +
> +	ret = devm_pm_opp_set_clknames(dev, names, i);
> +	if (ret)
> +		return ret;
> +
> +	ret = devm_pm_opp_of_add_table(dev);
> +	if (ret)
> +		return ret;
> +
> +	hba->use_pm_opp = true;
> +
> +	return 0;
> +}
> +
>  #define MAX_PROP_SIZE 32
>  static int ufshcd_populate_vreg(struct device *dev, const char *name,
>  		struct ufs_vreg **out_vreg)
> @@ -360,6 +423,12 @@ int ufshcd_pltfrm_init(struct platform_device *pdev,
>  		goto dealloc_host;
>  	}
>  
> +	err = ufshcd_parse_operating_points(hba);
> +	if (err) {
> +		dev_err(dev, "%s: OPP parse failed %d\n", __func__, err);
> +		goto dealloc_host;
> +	}
> +
>  	ufshcd_init_lanes_per_dir(hba);
>  
>  	err = ufshcd_init(hba, mmio_base, irq);
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 5bfa62fa288a..aec7da18a550 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -1022,6 +1022,9 @@ static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up)
>  	int ret = 0;
>  	ktime_t start = ktime_get();
>  
> +	if (hba->use_pm_opp)
> +		return 0;
> +
>  	ret = ufshcd_vops_clk_scale_notify(hba, scale_up, PRE_CHANGE);
>  	if (ret)
>  		goto out;
> @@ -1044,11 +1047,13 @@ static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up)
>  /**
>   * ufshcd_is_devfreq_scaling_required - check if scaling is required or not
>   * @hba: per adapter instance
> + * @freq: Target frequency
>   * @scale_up: True if scaling up and false if scaling down
>   *
>   * Returns true if scaling is required, false otherwise.
>   */
>  static bool ufshcd_is_devfreq_scaling_required(struct ufs_hba *hba,
> +					       unsigned long freq,
>  					       bool scale_up)
>  {
>  	struct ufs_clk_info *clki;
> @@ -1057,6 +1062,9 @@ static bool ufshcd_is_devfreq_scaling_required(struct ufs_hba *hba,
>  	if (list_empty(head))
>  		return false;
>  
> +	if (hba->use_pm_opp)
> +		return freq != hba->clk_scaling.target_freq;
> +
>  	list_for_each_entry(clki, head, list) {
>  		if (!IS_ERR_OR_NULL(clki->clk)) {
>  			if (scale_up && clki->max_freq) {
> @@ -1155,13 +1163,15 @@ static int ufshcd_wait_for_doorbell_clr(struct ufs_hba *hba,
>  /**
>   * ufshcd_scale_gear - scale up/down UFS gear
>   * @hba: per adapter instance
> + * @freq: Target frequency
>   * @scale_up: True for scaling up gear and false for scaling down
>   *
>   * Returns 0 for success,
>   * Returns -EBUSY if scaling can't happen at this time
>   * Returns non-zero for any other errors
>   */
> -static int ufshcd_scale_gear(struct ufs_hba *hba, bool scale_up)
> +static int ufshcd_scale_gear(struct ufs_hba *hba, unsigned long freq,
> +			     bool scale_up)
>  {
>  	int ret = 0;
>  	struct ufs_pa_layer_attr new_pwr_info;
> @@ -1186,6 +1196,12 @@ static int ufshcd_scale_gear(struct ufs_hba *hba, bool scale_up)
>  		}
>  	}
>  
> +	if (hba->use_pm_opp && scale_up) {
> +		ret = dev_pm_opp_set_rate(hba->dev, freq);
> +		if (ret)
> +			return ret;
> +	}
> +
>  	/* check if the power mode needs to be changed or not? */
>  	ret = ufshcd_config_pwr_mode(hba, &new_pwr_info);
>  	if (ret)
> @@ -1194,6 +1210,11 @@ static int ufshcd_scale_gear(struct ufs_hba *hba, bool scale_up)
>  			hba->pwr_info.gear_tx, hba->pwr_info.gear_rx,
>  			new_pwr_info.gear_tx, new_pwr_info.gear_rx);
>  
> +	if (ret && hba->use_pm_opp && scale_up)
> +		dev_pm_opp_set_rate(hba->dev, hba->devfreq->previous_freq);
> +	else if (hba->use_pm_opp && !scale_up)
> +		ret = dev_pm_opp_set_rate(hba->dev, freq);
> +
>  	return ret;
>  }
>  
> @@ -1236,13 +1257,15 @@ static void ufshcd_clock_scaling_unprepare(struct ufs_hba *hba, bool writelock)
>  /**
>   * ufshcd_devfreq_scale - scale up/down UFS clocks and gear
>   * @hba: per adapter instance
> + * @freq: Target frequency
>   * @scale_up: True for scaling up and false for scalin down
>   *
>   * Returns 0 for success,
>   * Returns -EBUSY if scaling can't happen at this time
>   * Returns non-zero for any other errors
>   */
> -static int ufshcd_devfreq_scale(struct ufs_hba *hba, bool scale_up)
> +static int ufshcd_devfreq_scale(struct ufs_hba *hba, unsigned long freq,
> +				bool scale_up)
>  {
>  	int ret = 0;
>  	bool is_writelock = true;
> @@ -1253,7 +1276,7 @@ static int ufshcd_devfreq_scale(struct ufs_hba *hba, bool scale_up)
>  
>  	/* scale down the gear before scaling down clocks */
>  	if (!scale_up) {
> -		ret = ufshcd_scale_gear(hba, false);
> +		ret = ufshcd_scale_gear(hba, freq, false);
>  		if (ret)
>  			goto out_unprepare;
>  	}
> @@ -1261,13 +1284,14 @@ static int ufshcd_devfreq_scale(struct ufs_hba *hba, bool scale_up)
>  	ret = ufshcd_scale_clks(hba, scale_up);
>  	if (ret) {
>  		if (!scale_up)
> -			ufshcd_scale_gear(hba, true);
> +			ufshcd_scale_gear(hba, hba->clk_scaling.target_freq,
> +					  true);
>  		goto out_unprepare;
>  	}
>  
>  	/* scale up the gear after scaling up clocks */
>  	if (scale_up) {
> -		ret = ufshcd_scale_gear(hba, true);
> +		ret = ufshcd_scale_gear(hba, freq, true);
>  		if (ret) {
>  			ufshcd_scale_clks(hba, false);
>  			goto out_unprepare;
> @@ -1332,9 +1356,20 @@ static int ufshcd_devfreq_target(struct device *dev,
>  	if (!ufshcd_is_clkscaling_supported(hba))
>  		return -EINVAL;
>  
> -	clki = list_first_entry(&hba->clk_list_head, struct ufs_clk_info, list);
>  	/* Override with the closest supported frequency */
> -	*freq = (unsigned long) clk_round_rate(clki->clk, *freq);
> +	if (hba->use_pm_opp) {
> +		struct dev_pm_opp *opp;
> +
> +		opp = devfreq_recommended_opp(dev, freq, flags);
> +		if (IS_ERR(opp))
> +			return PTR_ERR(opp);
> +		dev_pm_opp_put(opp);
> +	} else {
> +		clki = list_first_entry(&hba->clk_list_head, struct ufs_clk_info,
> +					list);
> +		*freq =	(unsigned long) clk_round_rate(clki->clk, *freq);
> +	}
> +
>  	spin_lock_irqsave(hba->host->host_lock, irq_flags);
>  	if (ufshcd_eh_in_progress(hba)) {
>  		spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
> @@ -1350,11 +1385,11 @@ static int ufshcd_devfreq_target(struct device *dev,
>  	}
>  
>  	/* Decide based on the rounded-off frequency and update */
> -	scale_up = (*freq == clki->max_freq) ? true : false;
> -	if (!scale_up)
> +	scale_up = (*freq > hba->clk_scaling.target_freq) ? true : false;
> +	if (!hba->use_pm_opp && !scale_up)
>  		*freq = clki->min_freq;
>  	/* Update the frequency */
> -	if (!ufshcd_is_devfreq_scaling_required(hba, scale_up)) {
> +	if (!ufshcd_is_devfreq_scaling_required(hba, *freq, scale_up)) {
>  		spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
>  		ret = 0;
>  		goto out; /* no state change required */
> @@ -1362,7 +1397,9 @@ static int ufshcd_devfreq_target(struct device *dev,
>  	spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
>  
>  	start = ktime_get();
> -	ret = ufshcd_devfreq_scale(hba, scale_up);
> +	ret = ufshcd_devfreq_scale(hba, *freq, scale_up);
> +	if (!ret)
> +		hba->clk_scaling.target_freq = *freq;
>  
>  	trace_ufshcd_profile_clk_scaling(dev_name(hba->dev),
>  		(scale_up ? "up" : "down"),
> @@ -1382,8 +1419,6 @@ static int ufshcd_devfreq_get_dev_status(struct device *dev,
>  	struct ufs_hba *hba = dev_get_drvdata(dev);
>  	struct ufs_clk_scaling *scaling = &hba->clk_scaling;
>  	unsigned long flags;
> -	struct list_head *clk_list = &hba->clk_list_head;
> -	struct ufs_clk_info *clki;
>  	ktime_t curr_t;
>  
>  	if (!ufshcd_is_clkscaling_supported(hba))
> @@ -1396,13 +1431,20 @@ static int ufshcd_devfreq_get_dev_status(struct device *dev,
>  	if (!scaling->window_start_t)
>  		goto start_window;
>  
> -	clki = list_first_entry(clk_list, struct ufs_clk_info, list);
> -	/*
> -	 * If current frequency is 0, then the ondemand governor considers
> -	 * there's no initial frequency set. And it always requests to set
> -	 * to max. frequency.
> -	 */
> -	stat->current_frequency = clki->curr_freq;
> +	if (hba->use_pm_opp) {
> +		stat->current_frequency = hba->clk_scaling.target_freq;
> +	} else {
> +		struct list_head *clk_list = &hba->clk_list_head;
> +		struct ufs_clk_info *clki;
> +
> +		clki = list_first_entry(clk_list, struct ufs_clk_info, list);
> +		/*
> +		 * If current frequency is 0, then the ondemand governor considers
> +		 * there's no initial frequency set. And it always requests to set
> +		 * to max. frequency.
> +		 */
> +		stat->current_frequency = clki->curr_freq;
> +	}
>  	if (scaling->is_busy_started)
>  		scaling->tot_busy_t += ktime_us_delta(curr_t,
>  				scaling->busy_start_t);
> @@ -1435,9 +1477,11 @@ static int ufshcd_devfreq_init(struct ufs_hba *hba)
>  	if (list_empty(clk_list))
>  		return 0;
>  
> -	clki = list_first_entry(clk_list, struct ufs_clk_info, list);
> -	dev_pm_opp_add(hba->dev, clki->min_freq, 0);
> -	dev_pm_opp_add(hba->dev, clki->max_freq, 0);
> +	if (!hba->use_pm_opp) {
> +		clki = list_first_entry(clk_list, struct ufs_clk_info, list);
> +		dev_pm_opp_add(hba->dev, clki->min_freq, 0);
> +		dev_pm_opp_add(hba->dev, clki->max_freq, 0);
> +	}
>  
>  	ufshcd_vops_config_scaling_param(hba, &hba->vps->devfreq_profile,
>  					 &hba->vps->ondemand_data);
> @@ -1449,8 +1493,10 @@ static int ufshcd_devfreq_init(struct ufs_hba *hba)
>  		ret = PTR_ERR(devfreq);
>  		dev_err(hba->dev, "Unable to register with devfreq %d\n", ret);
>  
> -		dev_pm_opp_remove(hba->dev, clki->min_freq);
> -		dev_pm_opp_remove(hba->dev, clki->max_freq);
> +		if (!hba->use_pm_opp) {
> +			dev_pm_opp_remove(hba->dev, clki->min_freq);
> +			dev_pm_opp_remove(hba->dev, clki->max_freq);
> +		}
>  		return ret;
>  	}
>  
> @@ -1462,7 +1508,6 @@ static int ufshcd_devfreq_init(struct ufs_hba *hba)
>  static void ufshcd_devfreq_remove(struct ufs_hba *hba)
>  {
>  	struct list_head *clk_list = &hba->clk_list_head;
> -	struct ufs_clk_info *clki;
>  
>  	if (!hba->devfreq)
>  		return;
> @@ -1470,9 +1515,13 @@ static void ufshcd_devfreq_remove(struct ufs_hba *hba)
>  	devfreq_remove_device(hba->devfreq);
>  	hba->devfreq = NULL;
>  
> -	clki = list_first_entry(clk_list, struct ufs_clk_info, list);
> -	dev_pm_opp_remove(hba->dev, clki->min_freq);
> -	dev_pm_opp_remove(hba->dev, clki->max_freq);
> +	if (!hba->use_pm_opp) {
> +		struct ufs_clk_info *clki;
> +
> +		clki = list_first_entry(clk_list, struct ufs_clk_info, list);
> +		dev_pm_opp_remove(hba->dev, clki->min_freq);
> +		dev_pm_opp_remove(hba->dev, clki->max_freq);
> +	}
>  }
>  
>  static void __ufshcd_suspend_clkscaling(struct ufs_hba *hba)
> @@ -1556,8 +1605,14 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev,
>  	if (value) {
>  		ufshcd_resume_clkscaling(hba);
>  	} else {
> +		struct dev_pm_opp *opp;
> +		unsigned long freq = ULONG_MAX;
> +
> +		opp = dev_pm_opp_find_freq_floor(dev, &freq);
> +		dev_pm_opp_put(opp);
> +
>  		ufshcd_suspend_clkscaling(hba);
> -		err = ufshcd_devfreq_scale(hba, true);
> +		err = ufshcd_devfreq_scale(hba, freq, true);
>  		if (err)
>  			dev_err(hba->dev, "%s: failed to scale clocks up %d\n",
>  					__func__, err);
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index 1a8f7b8977e6..c224a55fd9ee 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -443,6 +443,7 @@ struct ufs_clk_scaling {
>  	bool is_initialized;
>  	bool is_busy_started;
>  	bool is_suspended;
> +	unsigned long target_freq;
>  };
>  
>  #define UFS_EVENT_HIST_LENGTH 8
> @@ -776,6 +777,8 @@ struct ufs_hba_monitor {
>   * @auto_bkops_enabled: to track whether bkops is enabled in device
>   * @vreg_info: UFS device voltage regulator information
>   * @clk_list_head: UFS host controller clocks list node head
> + * @use_pm_opp: whether OPP table is provided and scaling gears should trigger
> + *              setting OPP
>   * @pwr_info: holds current power mode
>   * @max_pwr_info: keeps the device max valid pwm
>   * @clk_scaling_lock: used to serialize device commands and clock scaling
> @@ -892,6 +895,7 @@ struct ufs_hba {
>  	bool auto_bkops_enabled;
>  	struct ufs_vreg_info vreg_info;
>  	struct list_head clk_list_head;
> +	bool use_pm_opp;
>  
>  	/* Number of requests aborts */
>  	int req_abort_count;
> -- 
> 2.32.0
>