Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) client-ip=2620:137:e000::1:18;
From:   Tony Lindgren <tony@atomide.com>
To:     Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc:     Andy Shevchenko <andriy.shevchenko@intel.com>,
        Jiri Slaby <jirislaby@kernel.org>,
        Johan Hovold <johan@kernel.org>,
        Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        linux-serial@vger.kernel.org, linux-omap@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        Steffen Trumtrar <s.trumtrar@pengutronix.de>,
        =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= 
        <u.kleine-koenig@pengutronix.de>,
        "Matwey V. Kornilov" <matwey@sai.msu.ru>
Subject: [PATCH 2/2] serial: 8250: Fix runtime PM for start_tx() for empty buffer
Date:   Mon, 11 Apr 2022 12:48:05 +0300
Message-Id: <20220411094805.45696-2-tony@atomide.com>
In-Reply-To: <20220411094805.45696-1-tony@atomide.com>
References: <20220411094805.45696-1-tony@atomide.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

Commit 932d596378b0 ("serial: 8250: Return early in .start_tx() if there
are no chars to send") caused a regression where the drivers implementing
runtime PM stopped idling.

We need to call serial8250_rpm_put_tx() on early exit, it normally gets
called later on at __stop_tx().

Fixes: 932d596378b0 ("serial: 8250: Return early in .start_tx() if there are no chars to send")
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/tty/serial/8250/8250_port.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1677,8 +1677,10 @@ static void serial8250_start_tx(struct uart_port *port)
 
 	serial8250_rpm_get_tx(up);
 
-	if (!port->x_char && uart_circ_empty(&port->state->xmit))
+	if (!port->x_char && uart_circ_empty(&port->state->xmit)) {
+		serial8250_rpm_put_tx(up);
 		return;
+	}
 
 	if (em485 &&
 	    em485->active_timer == &em485->start_tx_timer) {
-- 
2.35.1