Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
Message-ID: <f9ab29c1-24f2-66d7-8b13-222c0d110a92@redhat.com>
Date:   Mon, 11 Apr 2022 14:39:17 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101
 Thunderbird/91.7.0
Subject: Re: [PATCH v2] winmate-fm07-keys: Winmate FM07/FM07P buttons
Content-Language: en-US
To:     Daniel Beer <daniel.beer@tirotech.co.nz>,
        Mark Gross <markgross@kernel.org>
Cc:     platform-driver-x86@vger.kernel.org, linux-kernel@vger.kernel.org
References: <623a110a.1c69fb81.64f39.0118@mx.google.com>
From:   Hans de Goede <hdegoede@redhat.com>
In-Reply-To: <623a110a.1c69fb81.64f39.0118@mx.google.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

Hi,

On 3/21/22 04:16, Daniel Beer wrote:
> Winmate FM07 and FM07P in-vehicle computers have a row of five buttons
> below the display. This module adds an input device that delivers key
> events when these buttons are pressed.
> 
> Signed-off-by: Daniel Beer <daniel.beer@tirotech.co.nz>

Thank you for your patch, I've applied this patch to my review-hans 
branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans

Note it will show up in my review-hans branch once I've pushed my
local branch there, which might take a while.

Once I've run some tests on this branch the patches there will be
added to the platform-drivers-x86/for-next branch and eventually
will be included in the pdx86 pull-request to Linus for the next
merge-window.

Regards,

Hans


> ---
> Changes in v2:
>   - Ratelimit message on poll timeout.
>   - Explain polling rate.
>   - Fix fm07keys_dmi_table and add missing macro.
>   - Fix check of platform_device_register_simple return value.
> 
>  drivers/platform/x86/Kconfig             |   8 +
>  drivers/platform/x86/Makefile            |   3 +
>  drivers/platform/x86/winmate-fm07-keys.c | 189 +++++++++++++++++++++++
>  3 files changed, 200 insertions(+)
>  create mode 100644 drivers/platform/x86/winmate-fm07-keys.c
> 
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 24deeeb29af2..62a5754d6ac9 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -1138,6 +1138,14 @@ config SIEMENS_SIMATIC_IPC
>  	  To compile this driver as a module, choose M here: the module
>  	  will be called simatic-ipc.
>  
> +config WINMATE_FM07_KEYS
> +	tristate "Winmate FM07/FM07P front-panel keys driver"
> +	depends on INPUT
> +	help
> +	  Winmate FM07 and FM07P in-vehicle computers have a row of five
> +	  buttons below the display. This module adds an input device
> +	  that delivers key events when these buttons are pressed.
> +
>  endif # X86_PLATFORM_DEVICES
>  
>  config PMC_ATOM
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index c12a9b044fd8..04e7c995b838 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -129,3 +129,6 @@ obj-$(CONFIG_PMC_ATOM)			+= pmc_atom.o
>  
>  # Siemens Simatic Industrial PCs
>  obj-$(CONFIG_SIEMENS_SIMATIC_IPC)	+= simatic-ipc.o
> +
> +# Winmate
> +obj-$(CONFIG_WINMATE_FM07_KEYS)		+= winmate-fm07-keys.o
> diff --git a/drivers/platform/x86/winmate-fm07-keys.c b/drivers/platform/x86/winmate-fm07-keys.c
> new file mode 100644
> index 000000000000..8c03a4d171b8
> --- /dev/null
> +++ b/drivers/platform/x86/winmate-fm07-keys.c
> @@ -0,0 +1,189 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Driver for the Winmate FM07 front-panel keys
> +//
> +// Author: Daniel Beer <daniel.beer@tirotech.co.nz>
> +
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/input.h>
> +#include <linux/ioport.h>
> +#include <linux/platform_device.h>
> +#include <linux/dmi.h>
> +#include <linux/io.h>
> +
> +#define DRV_NAME	"winmate-fm07keys"
> +
> +#define PORT_CMD	0x6c
> +#define PORT_DATA	0x68
> +
> +#define EC_ADDR_KEYS	0x3b
> +#define EC_CMD_READ	0x80
> +
> +#define BASE_KEY	KEY_F13
> +#define NUM_KEYS	5
> +
> +/* Typically we're done in fewer than 10 iterations */
> +#define LOOP_TIMEOUT	1000
> +
> +static void fm07keys_poll(struct input_dev *input)
> +{
> +	uint8_t k;
> +	int i;
> +
> +	/* Flush output buffer */
> +	i = 0;
> +	while (inb(PORT_CMD) & 0x01) {
> +		if (++i >= LOOP_TIMEOUT)
> +			goto timeout;
> +		inb(PORT_DATA);
> +	}
> +
> +	/* Send request and wait for write completion */
> +	outb(EC_CMD_READ, PORT_CMD);
> +	i = 0;
> +	while (inb(PORT_CMD) & 0x02)
> +		if (++i >= LOOP_TIMEOUT)
> +			goto timeout;
> +
> +	outb(EC_ADDR_KEYS, PORT_DATA);
> +	i = 0;
> +	while (inb(PORT_CMD) & 0x02)
> +		if (++i >= LOOP_TIMEOUT)
> +			goto timeout;
> +
> +	/* Wait for data ready */
> +	i = 0;
> +	while (!(inb(PORT_CMD) & 0x01))
> +		if (++i >= LOOP_TIMEOUT)
> +			goto timeout;
> +	k = inb(PORT_DATA);
> +
> +	/* Notify of new key states */
> +	for (i = 0; i < NUM_KEYS; i++) {
> +		input_report_key(input, BASE_KEY + i, (~k) & 1);
> +		k >>= 1;
> +	}
> +
> +	input_sync(input);
> +	return;
> +
> +timeout:
> +	dev_warn_ratelimited(&input->dev, "timeout polling IO memory\n");
> +}
> +
> +static int fm07keys_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct input_dev *input;
> +	int ret;
> +	int i;
> +
> +	input = devm_input_allocate_device(dev);
> +	if (!input) {
> +		dev_err(dev, "no memory for input device\n");
> +		return -ENOMEM;
> +	}
> +
> +	if (!devm_request_region(dev, PORT_CMD, 1, "Winmate FM07 EC"))
> +		return -EBUSY;
> +	if (!devm_request_region(dev, PORT_DATA, 1, "Winmate FM07 EC"))
> +		return -EBUSY;
> +
> +	input->name = "Winmate FM07 front-panel keys";
> +	input->phys = DRV_NAME "/input0";
> +
> +	input->id.bustype = BUS_HOST;
> +	input->id.vendor = 0x0001;
> +	input->id.product = 0x0001;
> +	input->id.version = 0x0100;
> +
> +	__set_bit(EV_KEY, input->evbit);
> +
> +	for (i = 0; i < NUM_KEYS; i++)
> +		__set_bit(BASE_KEY + i, input->keybit);
> +
> +	ret = input_setup_polling(input, fm07keys_poll);
> +	if (ret) {
> +		dev_err(dev, "unable to set up polling, err=%d\n", ret);
> +		return ret;
> +	}
> +
> +	/* These are silicone buttons. They can't be pressed in rapid
> +	 * succession too quickly, and 50 Hz seems to be an adequate
> +	 * sampling rate without missing any events when tested.
> +	 */
> +	input_set_poll_interval(input, 20);
> +
> +	ret = input_register_device(input);
> +	if (ret) {
> +		dev_err(dev, "unable to register polled device, err=%d\n",
> +			ret);
> +		return ret;
> +	}
> +
> +	input_sync(input);
> +	return 0;
> +}
> +
> +static struct platform_driver fm07keys_driver = {
> +	.probe		= fm07keys_probe,
> +	.driver		= {
> +		.name	= DRV_NAME
> +	},
> +};
> +
> +static struct platform_device *dev;
> +
> +static const struct dmi_system_id fm07keys_dmi_table[] __initconst = {
> +	{
> +		/* FM07 and FM07P */
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Winmate Inc."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "IP30"),
> +		},
> +	},
> +	{ }
> +};
> +
> +MODULE_DEVICE_TABLE(dmi, fm07keys_dmi_table);
> +
> +static int __init fm07keys_init(void)
> +{
> +	int ret;
> +
> +	if (!dmi_check_system(fm07keys_dmi_table))
> +		return -ENODEV;
> +
> +	ret = platform_driver_register(&fm07keys_driver);
> +	if (ret) {
> +		pr_err("fm07keys: failed to register driver, err=%d\n", ret);
> +		return ret;
> +	}
> +
> +	dev = platform_device_register_simple(DRV_NAME, -1, NULL, 0);
> +	if (IS_ERR(dev)) {
> +		ret = PTR_ERR(dev);
> +		pr_err("fm07keys: failed to allocate device, err = %d\n", ret);
> +		goto fail_register;
> +	}
> +
> +	return 0;
> +
> +fail_register:
> +	platform_driver_unregister(&fm07keys_driver);
> +	return ret;
> +}
> +
> +static void __exit fm07keys_exit(void)
> +{
> +	platform_driver_unregister(&fm07keys_driver);
> +	platform_device_unregister(dev);
> +}
> +
> +module_init(fm07keys_init);
> +module_exit(fm07keys_exit);
> +
> +MODULE_AUTHOR("Daniel Beer <daniel.beer@tirotech.co.nz>");
> +MODULE_DESCRIPTION("Winmate FM07 front-panel keys driver");
> +MODULE_LICENSE("GPL v2");