Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <6255fe91.1c69fb81.3ce58.2045@mx.google.com>
Date:   Tue, 12 Apr 2022 22:07:55 +0200
From:   Ansuel Smith <ansuelsmth@gmail.com>
To:     Bjorn Andersson <bjorn.andersson@linaro.org>
Cc:     Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, Jonathan McDowell <noodles@earth.li>
Subject: Re: [PATCH v3 03/18] ARM: dts: qcom: add missing rpm regulators and
 cells for ipq8064
References: <20220309190152.7998-1-ansuelsmth@gmail.com>
 <20220309190152.7998-4-ansuelsmth@gmail.com>
 <YlXXH3ikA5Tcdx9R@builder.lan>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <YlXXH3ikA5Tcdx9R@builder.lan>
Precedence: bulk

On Tue, Apr 12, 2022 at 02:46:39PM -0500, Bjorn Andersson wrote:
> On Wed 09 Mar 13:01 CST 2022, Ansuel Smith wrote:
> 
> > Add cells definition for rpm node
> 
> Why do we need the cells?
>

Mh I'm referring to address-cells and size-cells required for reg or dtb
will give warnings.

> > and add missing regulators for the 4
> > regulator present on ipq8064. There regulators are controlled by rpm and
> > to correctly works gsbi4_i2c require to be NEVER disabled or rpm will
> 
> Are you saying "...to correctly work, gsbi4_i2c must NEVER be disabled..."?
> 
> If so, that's good information, but how does it relate to this
> particular change?
> 

It doesn't but since it I had many days trying to debug the regulators
not working only to discover that the problem was with the pin, I thought
it was a good idea to add this info. Should I just drop it or should i
add some comments in the dts?

> Regards,
> Bjorn
> 
> > reject any regulator change request.
> > 
> > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > Tested-by: Jonathan McDowell <noodles@earth.li>
> > ---
> >  arch/arm/boot/dts/qcom-ipq8064.dtsi | 36 +++++++++++++++++++++++++++++
> >  1 file changed, 36 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> > index b309bc0fbbcd..0938838a4af8 100644
> > --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
> > +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> > @@ -842,10 +842,46 @@ rpm: rpm@108000 {
> >  			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
> >  			clock-names = "ram";
> >  
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +
> >  			rpmcc: clock-controller {
> >  				compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
> >  				#clock-cells = <1>;
> >  			};
> > +
> > +			smb208_regulators: regulators {
> > +				compatible = "qcom,rpm-smb208-regulators";
> > +				status = "okay";
> > +
> > +				smb208_s1a: s1a {
> > +					regulator-min-microvolt = <1050000>;
> > +					regulator-max-microvolt = <1150000>;
> > +
> > +					qcom,switch-mode-frequency = <1200000>;
> > +				};
> > +
> > +				smb208_s1b: s1b {
> > +					regulator-min-microvolt = <1050000>;
> > +					regulator-max-microvolt = <1150000>;
> > +
> > +					qcom,switch-mode-frequency = <1200000>;
> > +				};
> > +
> > +				smb208_s2a: s2a {
> > +					regulator-min-microvolt = < 800000>;
> > +					regulator-max-microvolt = <1250000>;
> > +
> > +					qcom,switch-mode-frequency = <1200000>;
> > +				};
> > +
> > +				smb208_s2b: s2b {
> > +					regulator-min-microvolt = < 800000>;
> > +					regulator-max-microvolt = <1250000>;
> > +
> > +					qcom,switch-mode-frequency = <1200000>;
> > +				};
> > +			};
> >  		};
> >  
> >  		tcsr: syscon@1a400000 {
> > -- 
> > 2.34.1
> > 

-- 
	Ansuel