Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Wed, 13 Apr 2022 23:35:46 +0200
From:   Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
To:     Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc:     devicetree@vger.kernel.org, Fabio Estevam <festevam@gmail.com>,
        Richard Zhu <hongxing.zhu@nxp.com>,
        linux-amarula@amarulasolutions.com,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Joakim Zhang <qiangqing.zhang@nxp.com>,
        linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
        NXP Linux Team <linux-imx@nxp.com>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Krzysztof Kozlowski <krzk+dt@kernel.org>,
        Shawn Guo <shawnguo@kernel.org>,
        Tim Harvey <tharvey@gateworks.com>,
        linux-arm-kernel@lists.infradead.org, Li Jun <jun.li@nxp.com>
Subject: Re: [PATCH v3] arm64: dts: imx8mm-evk: add pwm1/backlight support
Message-ID: <20220413213546.GA11567@tom-ThinkPad-T14s-Gen-2i>
References: <20220413160900.36271-1-tommaso.merciai@amarulasolutions.com>
 <11f8bf43-d6f7-12fe-f5da-1f7a397c4317@pengutronix.de>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <11f8bf43-d6f7-12fe-f5da-1f7a397c4317@pengutronix.de>
Precedence: bulk

On Wed, Apr 13, 2022 at 06:31:34PM +0200, Ahmad Fatoum wrote:
> Hello Tomasso,
> 
> On 13.04.22 18:08, Tommaso Merciai wrote:
> > Add pwm1/backlight support nodes for imx8mm_evk board.
> > Align with u-boot dts
> > 
> > References:
> >  - https://patchwork.ozlabs.org/project/uboot/patch/20220326111911.13720-9-tommaso.merciai@amarulasolutions.com/
> > 
> > Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
> > ---
> > Changes since v1:
> >  - Fix commit body
> >  - Enable pwm, backlight
> > 
> > Changes since v2:
> >  - Remove status okay from pwm1,backlight (enable as default)
> > 
> >  arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 19 +++++++++++++++++++
> >  1 file changed, 19 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> > index 6d67df7692f1..c50d2cc3ca71 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> > @@ -59,6 +59,14 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
> >  		enable-active-high;
> >  	};
> >  
> > +	backlight: backlight {
> > +		compatible = "pwm-backlight";
> > +		pwms = <&pwm1 0 5000000>;
> > +		brightness-levels = <0 255>;
> > +		num-interpolated-steps = <255>;
> > +		default-brightness-level = <250>;
> > +	};
> > +
> >  	ir-receiver {
> >  		compatible = "gpio-ir-receiver";
> >  		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
> > @@ -395,6 +403,11 @@ &wdog1 {
> >  	status = "okay";
> >  };
> >  
> > +&pwm1 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_backlight>;
> 
> imx8mm.dtsi has &pwm1 { status = "disabled" };
> Where is it enabled?

Hi Ahmad,
Thanks for review, update in v4.

Tommaso
> 
> > +};
> > +
> >  &iomuxc {
> >  	pinctrl_fec1: fec1grp {
> >  		fsl,pins = <
> > @@ -549,4 +562,10 @@ pinctrl_wdog: wdoggrp {
> >  			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x166
> >  		>;
> >  	};
> > +
> > +	pinctrl_backlight: backlightgrp {
> > +		fsl,pins = <
> > +			MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT	0x06
> > +		>;
> > +	};
> >  };
> 
> 
> -- 
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

-- 
Tommaso Merciai
Embedded Linux Engineer
tommaso.merciai@amarulasolutions.com
__________________________________

Amarula Solutions SRL
Via Le Canevare 30, 31100 Treviso, Veneto, IT
T. +39 042 243 5310
info@amarulasolutions.com
www.amarulasolutions.com