Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Samuel Holland <samuel@sholland.org>
To:     Kishon Vijay Abraham I <kishon@ti.com>,
        Vinod Koul <vkoul@kernel.org>, Heiko Stuebner <heiko@sntech.de>
Cc:     Peter Geis <pgwipeout@gmail.com>,
        Samuel Holland <samuel@sholland.org>,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-phy@lists.infradead.org, linux-rockchip@lists.infradead.org
Subject: [PATCH 0/6] phy: rockchip-inno-usb2: RK356x OTG fix and enhancements
Date:   Wed, 13 Apr 2022 22:22:51 -0500
Message-Id: <20220414032258.40984-1-samuel@sholland.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

This series gets USB OTG working on the RK356x SoCs, as used in the
PineNote tablet.

 - Patch 1 fixes an interrupt storm issue specific to RK356x.
 - Patches 2 and 3 are a couple of small optimizations.
 - Patches 4 and 5 reduce the delay when unplugging from the OTG port.
 - Patch 6 allows OTG ports to work in host mode without depending on
   another driver to provide an extcon. The specific use case here is
   a Type-C port controller that provides a hardware "ID pin" output.


Samuel Holland (6):
  phy: rockchip-inno-usb2: Fix muxed interrupt support
  phy: rockchip-inno-usb2: Do not check bvalid twice
  phy: rockchip-inno-usb2: Do not lock in bvalid IRQ handler
  phy: rockchip-inno-usb2: Support multi-bit mask properties
  phy: rockchip-inno-usb2: Handle bvalid falling
  phy: rockchip-inno-usb2: Handle ID IRQ

 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 125 +++++++++++++++---
 1 file changed, 105 insertions(+), 20 deletions(-)

-- 
2.35.1