Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
Date:   Fri, 15 Apr 2022 11:13:39 +0200
From:   Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To:     "Maciej W. Rozycki" <macro@orcam.me.uk>
Cc:     Jiri Slaby <jirislaby@kernel.org>,
        Andy Shevchenko <andy.shevchenko@gmail.com>,
        linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [RESEND][PATCH v3 1/2] serial: 8250: Fold EndRun device support
 into OxSemi Tornado code
Message-ID: <Ylk3Q6HyaN/5+97/@kroah.com>
References: <alpine.DEB.2.21.2203310114210.44113@angie.orcam.me.uk>
 <alpine.DEB.2.21.2203310121211.44113@angie.orcam.me.uk>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <alpine.DEB.2.21.2203310121211.44113@angie.orcam.me.uk>
Precedence: bulk

On Thu, Mar 31, 2022 at 08:11:42AM +0100, Maciej W. Rozycki wrote:
> The EndRun PTP/1588 dual serial port device is based on the Oxford
> Semiconductor OXPCIe952 UART device with the PCI vendor:device ID set
> for EndRun Technologies and uses the same sequence to determine the
> number of ports available.  Despite that we have duplicate code
> specific to the EndRun device.
> 
> Remove redundant code then and factor out OxSemi Tornado device
> detection.  Also correct the baud base like with commit 6cbe45d8ac93
> ("serial: 8250: Correct the clock for OxSemi PCIe devices") for the
> value of 3906250 rather than 4000000, obtained by dividing the 62.5MHz
> clock input by the default oversampling rate of 16.  Finally move the
> EndRun vendor:device ID to <linux/pci_ids.h>.

That's a lot of different things happening all the same commit.  Please
break this out into one-patch-per-logical-change as is required.

thanks,

greg k-h