Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) client-ip=2620:137:e000::1:18;
From:   Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
To:     <agross@kernel.org>, <bjorn.andersson@linaro.org>,
        <robh+dt@kernel.org>, <linux-arm-msm@vger.kernel.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <quic_rohkumar@quicinc.com>, <srinivas.kandagatla@linaro.org>,
        <dianders@chromium.org>, <swboyd@chromium.org>,
        <judyhsiao@chromium.org>
CC:     Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Subject: [PATCH v10 0/2] Add lpass pin control support for audio on sc7280 based targets
Date:   Thu, 14 Apr 2022 19:30:25 +0530
Message-ID: <1649944827-6455-1-git-send-email-quic_srivasam@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

This patch set is to add lpass pin control support for Audio over I2S,
wcd codec and digital mics.
This patch set depends on:
	-- Lpass-lpi pinctrl patches [https://patchwork.kernel.org/project/alsa-devel/list/?series=623951&archive=both&state=*]

Changes Since V9:
    -- Remove redundant prefix in node name.
Changes Since V8:
    -- Modify label and node names to lpass specific.
    -- Sort nodes as per node names and kind of nodes like pinctrl and device nodes.
Changes Since V7:
    -- Sort mi2s pincontrol nodes as per node name.
    -- Fix typo errors.
Changes Since V6:
    -- Move amp_en node to corresponding consumer patch.
    -- Update label and node names.
    -- Remove redundant drive-strengths.
    -- Remove herobrine crd specific mi2s configuration.
Changes Since V5:
    -- Remove redundant function property in amp_en node.
    -- Move board specific properties of lpass pin control node to board specific file.
    -- Remove redundant properties in pin control nodes.
    -- Move wcd938x codec reset and CTIA/OMTP pin control patches to other series.
Changes Since V4:
    -- Add primary and secondary I2S pinmux nodes for herobrine specific targets.
Changes Since V3:
    -- Add pinctrl nodes for wcd codec reset and CTIA/OMTP headset selection.
Changes Since V2:
    -- Move lpass pin control node to main dtsi file.
    -- Sort nodes alphabetically.
    -- Remove redundant wcd reset gpio nodes.
    -- Remove redundant input-enable field in dmic pin control nodes.
    -- Update amp_en node. 
    -- Fix typo errors.
    -- Modify node names.
    -- Create patches on latest kernel.    
Changes Since V1:
    -- Merge pinmux and pinconf properties in amp_en and wcd pin reset node.
    -- Split common i2s pin control nodes to functionality specific nodes.
    -- Move board specific properties to board specific dtsi file.
    -- Update dmic pin control node name.

Srinivasa Rao Mandadapu (2):
  arm64: dts: qcom: sc7280: Add pinmux for I2S speaker and Headset
  arm64: dts: qcom: sc7280: add lpass lpi pin controller node

 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi |  98 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7280.dtsi     | 147 +++++++++++++++++++++++++++++++
 2 files changed, 245 insertions(+)

-- 
2.7.4