Received: by 2002:a05:6a10:6d10:0:0:0:0 with SMTP id gq16csp4522860pxb; Wed, 20 Apr 2022 05:07:27 -0700 (PDT) X-Google-Smtp-Source: ABdhPJx8t/EFOll52G+6PmbmRqFsri+keAeOlPV9L0DweqchTxolnC+MG0WQ4Czhrxjqw0PAE7Dj X-Received: by 2002:a17:902:ce02:b0:151:a86d:dc2b with SMTP id k2-20020a170902ce0200b00151a86ddc2bmr20254804plg.57.1650456447315; Wed, 20 Apr 2022 05:07:27 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1650456447; cv=none; d=google.com; s=arc-20160816; b=1EVlLJPK7I9cLzL4JfCq5TsJ6WE4kSqjunrP9XFt94g6CbkSBUUi7WlIZoVC9NANPT mWIHzCUTUE/MaslZXsTwLrUgULxueHLVm/PwEboVAlYdeD5lZELs3UOJiTunGKI9bshk 2b824S+oBHWP0qrL6jRe58rLEOlbq8JoMtEFxZJrqWr1CCUwPHQxONj//QTyxyRuMf/Y HvvQth8B9DKVpNSMoxm6h/tL9Irmieq01r5nA2eqnPKK318QHmWqzA5SvY3xKqGsOoe6 l9MNBTyXRJD9vpj5Tdk73MIvvuuAjek7YQTbK4fiZGP6m6dxGRdiwVeRQDpSllFbfhLi ivbg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from; bh=MTR1bAREDZXxDq9RNstNPkI0LFuyefB7FVwp26YKkMk=; b=gwRx3ZhRTuFjdt6gKZx9IICtvMDRRsjIJSyZA6Vp/XXlvSUK+vUpZ9/Vj2UyOl9BOZ FQ5NbofjP0LmaprT5VWzMA2Rix2RXbB0psrvXJS+jcdk71+tVi28H0MczK66JLAwvBZw RbX3hmnCEV2KdoSHfcsc7UqcE+imQ5XeJnBqbs6RlAJP1JZRUaw6rcGocDv4aBkCf8gO +Q8a0+5XnY8RK8CyImRTM/Gj+0gD60tm4KetN5g9mnAoYP+pLI+NZZAO9womIiPjcnzr m6qsCrVwryYvL//a2rKZ7/k7jwrfmg4T2B/nAsHCwmbFRkYvPri/4I78OUvrdOg6xWyi cdcg== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id d23-20020a170902aa9700b001544c952660si1899149plr.353.2022.04.20.05.07.09; Wed, 20 Apr 2022 05:07:27 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1348502AbiDSEwO (ORCPT + 99 others); Tue, 19 Apr 2022 00:52:14 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46150 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S238572AbiDSEvb (ORCPT ); Tue, 19 Apr 2022 00:51:31 -0400 Received: from metis.ext.pengutronix.de (metis.ext.pengutronix.de [IPv6:2001:67c:670:201:290:27ff:fe1d:cc33]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7178B2F382 for ; Mon, 18 Apr 2022 21:48:49 -0700 (PDT) Received: from dude.hi.pengutronix.de ([2001:67c:670:100:1d::7]) by metis.ext.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1ngfmt-0002ub-FT; Tue, 19 Apr 2022 06:48:27 +0200 Received: from ore by dude.hi.pengutronix.de with local (Exim 4.94.2) (envelope-from ) id 1ngfmr-0047RY-Ss; Tue, 19 Apr 2022 06:48:25 +0200 From: Oleksij Rempel To: Rob Herring , Shawn Guo Cc: David Jander , Oleksij Rempel , devicetree@vger.kernel.org, Fabio Estevam , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, NXP Linux Team , Pengutronix Kernel Team , Robin van der Gracht Subject: [PATCH v2 12/17] ARM: dts: imx6qdl-vicut1.dtsi: Move some node out to DTS files Date: Tue, 19 Apr 2022 06:48:19 +0200 Message-Id: <20220419044824.981747-13-o.rempel@pengutronix.de> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20220419044824.981747-1-o.rempel@pengutronix.de> References: <20220419044824.981747-1-o.rempel@pengutronix.de> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-SA-Exim-Connect-IP: 2001:67c:670:100:1d::7 X-SA-Exim-Mail-From: ore@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-kernel@vger.kernel.org X-Spam-Status: No, score=-4.2 required=5.0 tests=BAYES_00,RCVD_IN_DNSWL_MED, SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: David Jander This commit will finally make this file identical to imx6qdl-victgo.dtsi. All nodes that are removed here are added as-is to the DTS files that include this file. Signed-off-by: David Jander Signed-off-by: Oleksij Rempel --- arch/arm/boot/dts/imx6dl-vicut1.dts | 122 ++++++++++++++++++++++++++ arch/arm/boot/dts/imx6q-vicut1.dts | 122 ++++++++++++++++++++++++++ arch/arm/boot/dts/imx6qdl-vicut1.dtsi | 120 ------------------------- arch/arm/boot/dts/imx6qp-vicutp.dts | 122 ++++++++++++++++++++++++++ 4 files changed, 366 insertions(+), 120 deletions(-) diff --git a/arch/arm/boot/dts/imx6dl-vicut1.dts b/arch/arm/boot/dts/imx6dl-vicut1.dts index 174fd913bf96..c6a904bbed01 100644 --- a/arch/arm/boot/dts/imx6dl-vicut1.dts +++ b/arch/arm/boot/dts/imx6dl-vicut1.dts @@ -10,4 +10,126 @@ / { model = "Kverneland UT1 Board"; compatible = "kvg,vicut1", "fsl,imx6dl"; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + autorepeat; + + power { + label = "Power Button"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + }; + }; + + panel { + compatible = "kyo,tcg121xglp"; + backlight = <&backlight_lcd>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-handle = <&rgmii_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ9031RNX PHY */ + rgmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", + "CAM2_MIRROR", "", "", "SMBALERT", + "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", + "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", + "SD1_DATA3", "ETH_MDIO", "", + "", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC"; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", + "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", + "CAN2_SR", "CAN2_TX", "CAN2_RX", + "", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL", + "HITCH_IN_OUT", + "LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "", + "ISB_LED"; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", + "I2S_BITCLK", "I2S_DOUT", + "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", + "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; +}; + +&gpio6 { + gpio-line-names = + "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", + "ITU656_D6", "ITU656_D7", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2", + "RGMII_TD3", + "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1", + "RGMII_RD2", "RGMII_RD3", "", ""; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 + /* Phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 + >; + }; + + pinctrl_gpiokeys: gpiokeygrp { + fsl,pins = < + /* nON_SWITCH */ + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 + >; + }; }; diff --git a/arch/arm/boot/dts/imx6q-vicut1.dts b/arch/arm/boot/dts/imx6q-vicut1.dts index e6c5d3cb48d7..8b228d5fc4a3 100644 --- a/arch/arm/boot/dts/imx6q-vicut1.dts +++ b/arch/arm/boot/dts/imx6q-vicut1.dts @@ -10,4 +10,126 @@ / { model = "Kverneland UT1Q Board"; compatible = "kvg,vicut1q", "fsl,imx6q"; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + autorepeat; + + power { + label = "Power Button"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + }; + }; + + panel { + compatible = "kyo,tcg121xglp"; + backlight = <&backlight_lcd>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-handle = <&rgmii_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ9031RNX PHY */ + rgmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", + "CAM2_MIRROR", "", "", "SMBALERT", + "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", + "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", + "SD1_DATA3", "ETH_MDIO", "", + "", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC"; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", + "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", + "CAN2_SR", "CAN2_TX", "CAN2_RX", + "", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL", + "HITCH_IN_OUT", + "LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "", + "ISB_LED"; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", + "I2S_BITCLK", "I2S_DOUT", + "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", + "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; +}; + +&gpio6 { + gpio-line-names = + "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", + "ITU656_D6", "ITU656_D7", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2", + "RGMII_TD3", + "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1", + "RGMII_RD2", "RGMII_RD3", "", ""; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 + /* Phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 + >; + }; + + pinctrl_gpiokeys: gpiokeygrp { + fsl,pins = < + /* nON_SWITCH */ + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 + >; + }; }; diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi index 6c943ca950f4..2a86136a04e8 100644 --- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi @@ -70,20 +70,6 @@ counter-2 { gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; }; - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpiokeys>; - autorepeat; - - power { - label = "Power Button"; - gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; - linux,code = ; - wakeup-source; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -111,18 +97,6 @@ led-2 { }; }; - panel { - compatible = "kyo,tcg121xglp"; - backlight = <&backlight_lcd>; - power-supply = <®_3v3>; - - port { - panel_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - }; - reg_1v8: regulator-1v8 { compatible = "regulator-fixed"; regulator-name = "1v8"; @@ -231,38 +205,6 @@ flash@0 { }; }; -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii-id"; - phy-handle = <&rgmii_phy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - /* Microchip KSZ9031RNX PHY */ - rgmii_phy: ethernet-phy@0 { - reg = <0>; - interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <300>; - }; - }; -}; - -&gpio1 { - gpio-line-names = - "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", - "CAM2_MIRROR", "", "", "SMBALERT", - "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", - "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", - "SD1_DATA3", "ETH_MDIO", "", - "", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC"; -}; - &gpio2 { gpio-line-names = "YACO_WHEEL", "YACO_RADAR", "YACO_PTO", "", "", "", "", "", @@ -282,38 +224,6 @@ &gpio3 { "YACO_RESET"; }; -&gpio4 { - gpio-line-names = - "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", - "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", - "CAN2_SR", "CAN2_TX", "CAN2_RX", - "", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL", - "HITCH_IN_OUT", - "LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "", - "ISB_LED"; -}; - -&gpio5 { - gpio-line-names = - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", - "I2S_BITCLK", "I2S_DOUT", - "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", - "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; -}; - -&gpio6 { - gpio-line-names = - "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", - "ITU656_D6", "ITU656_D7", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2", - "RGMII_TD3", - "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1", - "RGMII_RD2", "RGMII_RD3", "", ""; -}; - &gpio7 { gpio-line-names = "EMMC_DAT5", "EMMC_DAT4", "EMMC_CMD", "EMMC_CLK", "EMMC_DAT0", @@ -589,36 +499,6 @@ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 >; }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 - /* Phy reset */ - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 - >; - }; - - pinctrl_gpiokeys: gpiokeygrp { - fsl,pins = < - /* nON_SWITCH */ - MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 - >; - }; - pinctrl_hog: hoggrp { fsl,pins = < /* ITU656_nRESET */ diff --git a/arch/arm/boot/dts/imx6qp-vicutp.dts b/arch/arm/boot/dts/imx6qp-vicutp.dts index 7bad7ca6b12e..31c748e9d92f 100644 --- a/arch/arm/boot/dts/imx6qp-vicutp.dts +++ b/arch/arm/boot/dts/imx6qp-vicutp.dts @@ -10,4 +10,126 @@ / { model = "Kverneland UT1P Board"; compatible = "kvg,vicutp", "fsl,imx6qp"; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + autorepeat; + + power { + label = "Power Button"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + }; + }; + + panel { + compatible = "kyo,tcg121xglp"; + backlight = <&backlight_lcd>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-handle = <&rgmii_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ9031RNX PHY */ + rgmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", + "CAM2_MIRROR", "", "", "SMBALERT", + "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", + "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", + "SD1_DATA3", "ETH_MDIO", "", + "", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC"; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", + "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", + "CAN2_SR", "CAN2_TX", "CAN2_RX", + "", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL", + "HITCH_IN_OUT", + "LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "", + "ISB_LED"; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", + "I2S_BITCLK", "I2S_DOUT", + "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", + "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; +}; + +&gpio6 { + gpio-line-names = + "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", + "ITU656_D6", "ITU656_D7", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2", + "RGMII_TD3", + "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1", + "RGMII_RD2", "RGMII_RD3", "", ""; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 + /* Phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 + >; + }; + + pinctrl_gpiokeys: gpiokeygrp { + fsl,pins = < + /* nON_SWITCH */ + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 + >; + }; }; -- 2.30.2