Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <f6ea5c51-97dd-b225-3fb7-fcea5f722c39@linaro.org>
Date:   Tue, 19 Apr 2022 13:50:01 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101
 Thunderbird/91.7.0
Subject: Re: [PATCH 1/2] dt-binding: Add cypress,cy8c95x0 binding
Content-Language: en-US
To:     Patrick Rudolph <patrick.rudolph@9elements.com>,
        Linus Walleij <linus.walleij@linaro.org>
Cc:     Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
References: <20220419071503.1596423-1-patrick.rudolph@9elements.com>
 <20220419071503.1596423-2-patrick.rudolph@9elements.com>
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In-Reply-To: <20220419071503.1596423-2-patrick.rudolph@9elements.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 19/04/2022 09:15, Patrick Rudolph wrote:
> Added device tree binding documentation for
> Cypress CY8C95x0 I2C pin-controller.
> 

Thank you for your patch. There is something to discuss/improve.

(...)

> +  reg:
> +    maxItems: 1
> +
> +  gpio-controller: true
> +
> +  '#gpio-cells':
> +    description:
> +      The first cell is the pin number and the second cell is used
> +      to specify optional parameters.
> +    const: 2
> +
> +  gpio-reserved-ranges: true
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    description:
> +      Specifies the pin number and flags, as defined in
> +      include/dt-bindings/interrupt-controller/irq.h

Skip description, it's obvious.

> +    const: 2
> +
> +  ngpios:
> +    minimum: 1
> +    maximum: 60
> +
> +  gpio-line-names:
> +    minItems: 1
> +    maxItems: 60
> +
> +  vdd-supply:
> +    description:
> +      Optional power supply.
> +
> +patternProperties:
> +  '-pins$':
> +    type: object
> +    description:
> +      Pinctrl node's client devices use subnodes for desired pin configuration.
> +      Client device subnodes use below standard properties.
> +    $ref: "/schemas/pinctrl/pincfg-node.yaml"
> +
> +    properties:
> +      pins:
> +        description:
> +          List of gpio pins affected by the properties specified in this
> +          subnode.
> +        items:
> +          oneOf:

Why do you need oneOf here?

> +            - pattern: "^gp([0-7][0-7])$"
> +        minItems: 1
> +        maxItems: 60
> +
> +      function:
> +        enum: [ gpio, pwm ]
> +

No need for blank line. In other cases you put description before the
property constraints, so do it consistently here as well.

> +        description:
> +          Specify the alternative function to be configured for the specified
> +          pins.
> +
> +      bias-pull-down: true
> +
> +      bias-pull-up: true
> +
> +      bias-disable: true
> +
> +      output-high: true
> +
> +      output-low: true
> +
> +      drive-push-pull: true
> +
> +      drive-open-drain: true
> +
> +      drive-open-source: true
> +
> +    required:
> +      - pins
> +      - function
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-controller
> +  - '#interrupt-cells'
> +  - gpio-controller
> +  - '#gpio-cells'

no allOf referencing pinctrl.yaml? Include it unless there is some
reason not to.

Best regards,
Krzysztof