Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
Date:   Fri, 22 Apr 2022 08:16:55 +0200
From:   Helmut Grohne <helmut.grohne@intenta.de>
To:     Support Opensource <support.opensource@diasemi.com>,
        Lee Jones <lee.jones@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        <devicetree@vger.kernel.org>
CC:     <linux-kernel@vger.kernel.org>
Subject: [PATCH v2 2/2] dt-bindings: mfd: da9062 can be a system power
 controller
Message-ID: <3a0838f71653f57be9a866c96dda5921cb10a653.1650606541.git.helmut.grohne@intenta.de>
References: <ca76e2bb2f5d47ad189fa1a40bb6dd8a5dc225d2.1650606541.git.helmut.grohne@intenta.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <ca76e2bb2f5d47ad189fa1a40bb6dd8a5dc225d2.1650606541.git.helmut.grohne@intenta.de>
User-Agent: Mutt/1.10.1 (2018-07-13)
Precedence: bulk

The DA9062 can be used to power off a system if it is appropriately
wired.

Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de>
---
 Documentation/devicetree/bindings/mfd/da9062.txt | 1 +
 1 file changed, 1 insertion(+)

This series effectively is a rebased resend. The earlier posting was
https://lore.kernel.org/all/20200107120613.GA746@laureti-dev/. Back then, this
patch was Acked-by: Rob Herring, but I'm not including that ack here, because
this patch required a non-trivial rebase.

Helmut

diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt
index bab0d0e66cb3..4861c3ad97e9 100644
--- a/Documentation/devicetree/bindings/mfd/da9062.txt
+++ b/Documentation/devicetree/bindings/mfd/da9062.txt
@@ -41,6 +41,7 @@ further information on IRQ bindings.
 
 Optional properties:
 
+- system-power-controller
 - gpio-controller : Marks the device as a gpio controller.
 - #gpio-cells     : Should be two. The first cell is the pin number and the
                     second cell is used to specify the gpio polarity.
-- 
2.20.1

Dipl.-Inf. Helmut Grohne
Research and Development
Application Engineering
 
Phone: +49 (371) 24354 0 ∙ Fax:  +49 (371) 24354 020
helmut.grohne@intenta.de ∙ https://www.intenta.de
 
Intenta GmbH ∙ Ahornstraße 55 ∙ 09112 Chemnitz, Germany
Managing Director: Dr.-Ing. Basel Fardi ∙ VAT/USt-IdNr.: DE 275745394
Commercial register: HRB 26404 Amtsgericht Chemnitz