Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Sender: Guenter Roeck <groeck7@gmail.com>
Date:   Sun, 24 Apr 2022 09:06:28 -0700
From:   Guenter Roeck <linux@roeck-us.net>
To:     Jack Doan <me@jackdoan.com>
Cc:     linux-hwmon@vger.kernel.org,
        Aleksa Savic <savicaleksa83@gmail.com>,
        Jean Delvare <jdelvare@suse.com>,
        Jonathan Corbet <corbet@lwn.net>, linux-doc@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] hwmon: (aquacomputer_d5next) Add support for
 Aquacomputer Farbwerk
Message-ID: <20220424160628.GA719092@roeck-us.net>
References: <YmTcrq8Gzel0zYYD@jackdesk>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <YmTcrq8Gzel0zYYD@jackdesk>
Precedence: bulk

On Sun, Apr 24, 2022 at 12:14:22AM -0500, Jack Doan wrote:
> Extend aquacomputer_d5next driver to expose hardware
> temperature sensors of the Aquacomputer Farbwerk RGB controller, which
> communicates through a proprietary USB HID protocol.
> 
> Four temperature sensors are available. Additionally, serial number and
> firmware version are exposed through debugfs.
> 
> Also, add Jack Doan to MAINTAINERS for this driver.
> 
> Signed-off-by: Jack Doan <me@jackdoan.com>
> Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>

Applied.

Thanks,
Guenter

> ---
> Changes in v2:
>   - update Kconfig so it applies cleanly
>   - add "select CRC16" to Kconfig
> ---
>  Documentation/hwmon/aquacomputer_d5next.rst |  3 +-
>  MAINTAINERS                                 |  1 +
>  drivers/hwmon/Kconfig                       |  5 +--
>  drivers/hwmon/aquacomputer_d5next.c         | 37 ++++++++++++++++++---
>  4 files changed, 38 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst
> index e69f718caf5b..717e28226cde 100644
> --- a/Documentation/hwmon/aquacomputer_d5next.rst
> +++ b/Documentation/hwmon/aquacomputer_d5next.rst
> @@ -6,6 +6,7 @@ Kernel driver aquacomputer-d5next
>  Supported devices:
>  
>  * Aquacomputer D5 Next watercooling pump
> +* Aquacomputer Farbwerk RGB controller
>  * Aquacomputer Farbwerk 360 RGB controller
>  * Aquacomputer Octo fan controller
>  
> @@ -32,7 +33,7 @@ better suited for userspace tools.
>  The Octo exposes four temperature sensors and eight PWM controllable fans, along
>  with their speed (in RPM), power, voltage and current.
>  
> -The Farbwerk 360 exposes four temperature sensors. Depending on the device,
> +The Farbwerk and Farbwerk 360 expose four temperature sensors. Depending on the device,
>  not all sysfs and debugfs entries will be available.
>  
>  Usage notes
> diff --git a/MAINTAINERS b/MAINTAINERS
> index fd768d43e048..c5cd8dd866ee 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1446,6 +1446,7 @@ F:	drivers/media/i2c/aptina-pll.*
>  
>  AQUACOMPUTER D5 NEXT PUMP SENSOR DRIVER
>  M:	Aleksa Savic <savicaleksa83@gmail.com>
> +M:	Jack Doan <me@jackdoan.com>
>  L:	linux-hwmon@vger.kernel.org
>  S:	Maintained
>  F:	Documentation/hwmon/aquacomputer_d5next.rst
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 1f1bb4d858cb..4a6d6c5b9b69 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -256,13 +256,14 @@ config SENSORS_AHT10
>  	  will be called aht10.
>  
>  config SENSORS_AQUACOMPUTER_D5NEXT
> -	tristate "Aquacomputer D5 Next, Octo and Farbwerk 360"
> +	tristate "Aquacomputer D5 Next, Octo, Farbwerk, and Farbwerk 360"
>  	depends on USB_HID
>  	select CRC16
>  	help
>  	  If you say yes here you get support for sensors and fans of
>  	  the Aquacomputer D5 Next watercooling pump, Octo fan
> -	  controller and Farbwerk 360 RGB controller, where available.
> +	  controller, Farbwerk and Farbwerk 360 RGB controllers, where
> +	  available.
>  
>  	  This driver can also be built as a module. If so, the module
>  	  will be called aquacomputer_d5next.
> diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
> index a464473bc981..7d2e7279abfb 100644
> --- a/drivers/hwmon/aquacomputer_d5next.c
> +++ b/drivers/hwmon/aquacomputer_d5next.c
> @@ -1,11 +1,12 @@
>  // SPDX-License-Identifier: GPL-2.0+
>  /*
> - * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk 360, Octo)
> + * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk, Farbwerk 360, Octo)
>   *
>   * Aquacomputer devices send HID reports (with ID 0x01) every second to report
>   * sensor values.
>   *
>   * Copyright 2021 Aleksa Savic <savicaleksa83@gmail.com>
> + * Copyright 2022 Jack Doan <me@jackdoan.com>
>   */
>  
>  #include <linux/crc16.h>
> @@ -19,14 +20,16 @@
>  #include <asm/unaligned.h>
>  
>  #define USB_VENDOR_ID_AQUACOMPUTER	0x0c70
> +#define USB_PRODUCT_ID_FARBWERK		0xf00a
>  #define USB_PRODUCT_ID_D5NEXT		0xf00e
>  #define USB_PRODUCT_ID_FARBWERK360	0xf010
>  #define USB_PRODUCT_ID_OCTO		0xf011
>  
> -enum kinds { d5next, farbwerk360, octo };
> +enum kinds { d5next, farbwerk, farbwerk360, octo };
>  
>  static const char *const aqc_device_names[] = {
>  	[d5next] = "d5next",
> +	[farbwerk] = "farbwerk",
>  	[farbwerk360] = "farbwerk360",
>  	[octo] = "octo"
>  };
> @@ -69,6 +72,12 @@ static u8 secondary_ctrl_report[] = {
>  #define D5NEXT_PUMP_CURRENT		112
>  #define D5NEXT_FAN_CURRENT		99
>  
> +/* Register offsets for the Farbwerk RGB controller */
> +#define FARBWERK_NUM_SENSORS		4
> +#define FARBWERK_SENSOR_START		0x2f
> +#define FARBWERK_SENSOR_SIZE		0x02
> +#define FARBWERK_SENSOR_DISCONNECTED	0x7FFF
> +
>  /* Register offsets for the Farbwerk 360 RGB controller */
>  #define FARBWERK360_NUM_SENSORS		4
>  #define FARBWERK360_SENSOR_START	0x32
> @@ -125,7 +134,7 @@ static const char *const label_d5next_current[] = {
>  	"Fan current"
>  };
>  
> -/* Labels for Farbwerk 360 and Octo temperature sensors */
> +/* Labels for Farbwerk, Farbwerk 360 and Octo temperature sensors */
>  static const char *const label_temp_sensors[] = {
>  	"Sensor 1",
>  	"Sensor 2",
> @@ -319,6 +328,7 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3
>  			if (channel == 0)
>  				return 0444;
>  			break;
> +		case farbwerk:
>  		case farbwerk360:
>  		case octo:
>  			return 0444;
> @@ -551,8 +561,7 @@ static const struct hwmon_chip_info aqc_chip_info = {
>  	.info = aqc_info,
>  };
>  
> -static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data,
> -			 int size)
> +static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size)
>  {
>  	int i, sensor_value;
>  	struct aqc_data *priv;
> @@ -587,6 +596,17 @@ static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8
>  		priv->current_input[0] = get_unaligned_be16(data + D5NEXT_PUMP_CURRENT);
>  		priv->current_input[1] = get_unaligned_be16(data + D5NEXT_FAN_CURRENT);
>  		break;
> +	case farbwerk:
> +		/* Temperature sensor readings */
> +		for (i = 0; i < FARBWERK_NUM_SENSORS; i++) {
> +			sensor_value = get_unaligned_be16(data + FARBWERK_SENSOR_START +
> +							  i * FARBWERK_SENSOR_SIZE);
> +			if (sensor_value == FARBWERK_SENSOR_DISCONNECTED)
> +				priv->temp_input[i] = -ENODATA;
> +			else
> +				priv->temp_input[i] = sensor_value * 10;
> +		}
> +		break;
>  	case farbwerk360:
>  		/* Temperature sensor readings */
>  		for (i = 0; i < FARBWERK360_NUM_SENSORS; i++) {
> @@ -733,6 +753,11 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
>  		priv->voltage_label = label_d5next_voltages;
>  		priv->current_label = label_d5next_current;
>  		break;
> +	case USB_PRODUCT_ID_FARBWERK:
> +		priv->kind = farbwerk;
> +
> +		priv->temp_label = label_temp_sensors;
> +		break;
>  	case USB_PRODUCT_ID_FARBWERK360:
>  		priv->kind = farbwerk360;
>  
> @@ -795,6 +820,7 @@ static void aqc_remove(struct hid_device *hdev)
>  
>  static const struct hid_device_id aqc_table[] = {
>  	{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_D5NEXT) },
> +	{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK) },
>  	{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK360) },
>  	{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_OCTO) },
>  	{ }
> @@ -826,4 +852,5 @@ module_exit(aqc_exit);
>  
>  MODULE_LICENSE("GPL");
>  MODULE_AUTHOR("Aleksa Savic <savicaleksa83@gmail.com>");
> +MODULE_AUTHOR("Jack Doan <me@jackdoan.com>");
>  MODULE_DESCRIPTION("Hwmon driver for Aquacomputer devices");