Received: by 2002:a05:6602:2086:0:0:0:0 with SMTP id a6csp4422972ioa; Wed, 27 Apr 2022 03:38:16 -0700 (PDT) X-Google-Smtp-Source: ABdhPJy79LXG8GVrmmS28wR/NAO3Ra1726D5gwbf6A7ONJ0RtGYqM6poIPmeu+2FQGpuhSLqdMPZ X-Received: by 2002:a05:6a00:c8d:b0:50a:51fe:e462 with SMTP id a13-20020a056a000c8d00b0050a51fee462mr29012609pfv.43.1651055895791; Wed, 27 Apr 2022 03:38:15 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1651055895; cv=none; d=google.com; s=arc-20160816; b=Tx6wYO7WFNgo5SvIQ4xpJNCi3x2SdRQadWvJuvz6rWVW6Mg2CodE93PNMQTDGOcrUx ZXgv0nPgxKFCeqsI8MBOlzWp4XFwRlZieCnmiYEbMBTVk64FZxhaI/QTEdE1sp7+FlYH v7M3gCL67gcsGpyOA6ZqYKaJqYaRZvMzJsr1RNh3/MrN5i4ghstJO7g1bFFbkWW1OSaQ Fwcj0fngjUCbwxTYnzqI2+mRch2kBmk/XQg+80eugC7Xj63G9X7JJFjb5KhJjXMvcniG fJk7UesHbyHSusFj/9fhDUxyUjPJvBKUA1Nrm4gnPj/aca5V++oFIxOFFXhmNdjWhWcr IqsQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=qbndjaAzGBhSUT0vkLTrQI5o44qjwOhtTHmy0qyNl0o=; b=pR5P1Xxi8h4JmQ02O3PeMcBUOKQAkppOEhXU66VirCCAn5cYGb4OlssuQl3oyfwMAd AHkoejdey559a9j6x8gCCoJ/XeRlKJmNH/Sr8+/p1lWVw7Dr4qnhlKG5WP94vPRWa8Jo Q0i+c6CCY87hjJ+/3UNdYtbzBzVOcf7Q2FXnV84CWZktaWB+ze0MIAOpwbDitGXkXLjS 1kA8cpqPByrMMsoo+oQWPjuGeH1MijSxJW0teqzL6i0h3QGUQs0KzbpTFX2awgwRlE8I ND1rO0n7ZvSWj3mjT/+9fXJXHAtHyNXFIArB5RYoyKdpZF4jEHlvgjtajAHrVaxszs80 sG6w== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@bewilderbeest.net header.s=thorn header.b=ia9ybS6k; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=bewilderbeest.net Return-Path: Received: from lindbergh.monkeyblade.net (lindbergh.monkeyblade.net. [2620:137:e000::1:18]) by mx.google.com with ESMTPS id r16-20020a6560d0000000b003aa8919706asi1064279pgv.326.2022.04.27.03.38.15 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 27 Apr 2022 03:38:15 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) client-ip=2620:137:e000::1:18; Authentication-Results: mx.google.com; dkim=pass header.i=@bewilderbeest.net header.s=thorn header.b=ia9ybS6k; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=bewilderbeest.net Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 24F573CDE18; Wed, 27 Apr 2022 02:49:10 -0700 (PDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1356631AbiD0BGQ (ORCPT + 99 others); Tue, 26 Apr 2022 21:06:16 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:60628 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1356580AbiD0BFw (ORCPT ); Tue, 26 Apr 2022 21:05:52 -0400 Received: from thorn.bewilderbeest.net (thorn.bewilderbeest.net [71.19.156.171]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id ED20B47065; Tue, 26 Apr 2022 18:02:40 -0700 (PDT) Received: from hatter.bewilderbeest.net (174-21-163-222.tukw.qwest.net [174.21.163.222]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) (Authenticated sender: zev) by thorn.bewilderbeest.net (Postfix) with ESMTPSA id 89190CB3; Tue, 26 Apr 2022 18:02:39 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bewilderbeest.net; s=thorn; t=1651021359; bh=qbndjaAzGBhSUT0vkLTrQI5o44qjwOhtTHmy0qyNl0o=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=ia9ybS6kJI0zFQ7ekxu1GAe1MtXXC6FZaqUVAozp35I2M2jJphIBSxJaofFxPeyBY JHsGwXDSdLqvFcUlC6hbsFmRyv5DO1i5G0yc4RFWeRN3lHQ6OsefiUBHbJAqpLISYu rlhWcFewtjCfZQhFIb5ZLGCYzP/G0A4MH6/NL3xE= From: Zev Weiss To: Guenter Roeck , Jean Delvare , linux-hwmon@vger.kernel.org Cc: Zev Weiss , Renze Nicolai , Oleksandr Natalenko , openbmc@lists.ozlabs.org, linux-kernel@vger.kernel.org Subject: [PATCH v4 6/7] hwmon: (nct6775) Split core and platform driver Date: Tue, 26 Apr 2022 18:01:53 -0700 Message-Id: <20220427010154.29749-7-zev@bewilderbeest.net> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20220427010154.29749-1-zev@bewilderbeest.net> References: <20220427010154.29749-1-zev@bewilderbeest.net> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Spam-Status: No, score=-2.0 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS, MAILING_LIST_MULTI,RDNS_NONE,SPF_HELO_NONE autolearn=no autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This splits the nct6775 driver into an interface-independent core and a separate platform driver that wraps inb/outb port I/O (or asuswmi methods) around that core. Signed-off-by: Zev Weiss Tested-by: Renze Nicolai --- MAINTAINERS | 6 +- drivers/hwmon/Kconfig | 14 +- drivers/hwmon/Makefile | 2 + drivers/hwmon/{nct6775.c => nct6775-core.c} | 1459 +------------------ drivers/hwmon/nct6775-platform.c | 1226 ++++++++++++++++ drivers/hwmon/nct6775.h | 252 ++++ 6 files changed, 1526 insertions(+), 1433 deletions(-) rename drivers/hwmon/{nct6775.c => nct6775-core.c} (76%) create mode 100644 drivers/hwmon/nct6775-platform.c create mode 100644 drivers/hwmon/nct6775.h diff --git a/MAINTAINERS b/MAINTAINERS index 316b96575133..88fdb7cb3197 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13529,12 +13529,14 @@ M: Samuel Mendoza-Jonas S: Maintained F: net/ncsi/ -NCT6775 HARDWARE MONITOR DRIVER +NCT6775 HARDWARE MONITOR DRIVER - CORE & PLATFORM DRIVER M: Guenter Roeck L: linux-hwmon@vger.kernel.org S: Maintained F: Documentation/hwmon/nct6775.rst -F: drivers/hwmon/nct6775.c +F: drivers/hwmon/nct6775-core.c +F: drivers/hwmon/nct6775-platform.c +F: drivers/hwmon/nct6775.h NETDEVSIM M: Jakub Kicinski diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index c4e4adb6c302..85c22bba439b 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1462,11 +1462,23 @@ config SENSORS_NCT6683 This driver can also be built as a module. If so, the module will be called nct6683. +config SENSORS_NCT6775_CORE + tristate + select REGMAP + help + This module contains common code shared by the platform and + i2c versions of the nct6775 driver; it is not useful on its + own. + + If built as a module, the module will be called + nct6775-core. + config SENSORS_NCT6775 - tristate "Nuvoton NCT6775F and compatibles" + tristate "Platform driver for Nuvoton NCT6775F and compatibles" depends on !PPC depends on ACPI_WMI || ACPI_WMI=n select HWMON_VID + select SENSORS_NCT6775_CORE help If you say yes here you get support for the hardware monitoring functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 8a03289e2aa4..93f2b774cc5e 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -154,6 +154,8 @@ obj-$(CONFIG_SENSORS_MLXREG_FAN) += mlxreg-fan.o obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o obj-$(CONFIG_SENSORS_MR75203) += mr75203.o obj-$(CONFIG_SENSORS_NCT6683) += nct6683.o +obj-$(CONFIG_SENSORS_NCT6775_CORE) += nct6775-core.o +nct6775-objs := nct6775-platform.o obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o obj-$(CONFIG_SENSORS_NCT7802) += nct7802.o obj-$(CONFIG_SENSORS_NCT7904) += nct7904.o diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775-core.c similarity index 76% rename from drivers/hwmon/nct6775.c rename to drivers/hwmon/nct6775-core.c index 5e741bcf2645..446964cbae4c 100644 --- a/drivers/hwmon/nct6775.c +++ b/drivers/hwmon/nct6775-core.c @@ -44,25 +44,20 @@ #include #include #include -#include #include #include -#include #include #include -#include #include -#include -#include #include #include -#include #include "lm75.h" +#include "nct6775.h" -#define USE_ALTERNATE +#undef DEFAULT_SYMBOL_NAMESPACE +#define DEFAULT_SYMBOL_NAMESPACE HWMON_NCT6775 -enum kinds { nct6106, nct6116, nct6775, nct6776, nct6779, nct6791, nct6792, - nct6793, nct6795, nct6796, nct6797, nct6798 }; +#define USE_ALTERNATE /* used to set data->name = nct6775_device_names[data->sio_kind] */ static const char * const nct6775_device_names[] = { @@ -80,242 +75,6 @@ static const char * const nct6775_device_names[] = { "nct6798", }; -static const char * const nct6775_sio_names[] __initconst = { - "NCT6106D", - "NCT6116D", - "NCT6775F", - "NCT6776D/F", - "NCT6779D", - "NCT6791D", - "NCT6792D", - "NCT6793D", - "NCT6795D", - "NCT6796D", - "NCT6797D", - "NCT6798D", -}; - -static unsigned short force_id; -module_param(force_id, ushort, 0); -MODULE_PARM_DESC(force_id, "Override the detected device ID"); - -static unsigned short fan_debounce; -module_param(fan_debounce, ushort, 0); -MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal"); - -#define DRVNAME "nct6775" - -/* - * Super-I/O constants and functions - */ - -#define NCT6775_LD_ACPI 0x0a -#define NCT6775_LD_HWM 0x0b -#define NCT6775_LD_VID 0x0d -#define NCT6775_LD_12 0x12 - -#define SIO_REG_LDSEL 0x07 /* Logical device select */ -#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */ -#define SIO_REG_ENABLE 0x30 /* Logical device enable */ -#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ - -#define SIO_NCT6106_ID 0xc450 -#define SIO_NCT6116_ID 0xd280 -#define SIO_NCT6775_ID 0xb470 -#define SIO_NCT6776_ID 0xc330 -#define SIO_NCT6779_ID 0xc560 -#define SIO_NCT6791_ID 0xc800 -#define SIO_NCT6792_ID 0xc910 -#define SIO_NCT6793_ID 0xd120 -#define SIO_NCT6795_ID 0xd350 -#define SIO_NCT6796_ID 0xd420 -#define SIO_NCT6797_ID 0xd450 -#define SIO_NCT6798_ID 0xd428 -#define SIO_ID_MASK 0xFFF8 - -enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 }; -enum sensor_access { access_direct, access_asuswmi }; - -struct nct6775_sio_data { - int sioreg; - int ld; - enum kinds kind; - enum sensor_access access; - - /* superio_() callbacks */ - void (*sio_outb)(struct nct6775_sio_data *sio_data, int reg, int val); - int (*sio_inb)(struct nct6775_sio_data *sio_data, int reg); - void (*sio_select)(struct nct6775_sio_data *sio_data, int ld); - int (*sio_enter)(struct nct6775_sio_data *sio_data); - void (*sio_exit)(struct nct6775_sio_data *sio_data); -}; - -#define ASUSWMI_MONITORING_GUID "466747A0-70EC-11DE-8A39-0800200C9A66" -#define ASUSWMI_METHODID_RSIO 0x5253494F -#define ASUSWMI_METHODID_WSIO 0x5753494F -#define ASUSWMI_METHODID_RHWM 0x5248574D -#define ASUSWMI_METHODID_WHWM 0x5748574D -#define ASUSWMI_UNSUPPORTED_METHOD 0xFFFFFFFE - -static int nct6775_asuswmi_evaluate_method(u32 method_id, u8 bank, u8 reg, u8 val, u32 *retval) -{ -#if IS_ENABLED(CONFIG_ACPI_WMI) - u32 args = bank | (reg << 8) | (val << 16); - struct acpi_buffer input = { (acpi_size) sizeof(args), &args }; - struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; - acpi_status status; - union acpi_object *obj; - u32 tmp = ASUSWMI_UNSUPPORTED_METHOD; - - status = wmi_evaluate_method(ASUSWMI_MONITORING_GUID, 0, - method_id, &input, &output); - - if (ACPI_FAILURE(status)) - return -EIO; - - obj = output.pointer; - if (obj && obj->type == ACPI_TYPE_INTEGER) - tmp = obj->integer.value; - - if (retval) - *retval = tmp; - - kfree(obj); - - if (tmp == ASUSWMI_UNSUPPORTED_METHOD) - return -ENODEV; - return 0; -#else - return -EOPNOTSUPP; -#endif -} - -static inline int nct6775_asuswmi_write(u8 bank, u8 reg, u8 val) -{ - return nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WHWM, bank, - reg, val, NULL); -} - -static inline int nct6775_asuswmi_read(u8 bank, u8 reg, u8 *val) -{ - u32 ret, tmp = 0; - - ret = nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RHWM, bank, - reg, 0, &tmp); - *val = tmp; - return ret; -} - -static int superio_wmi_inb(struct nct6775_sio_data *sio_data, int reg) -{ - int tmp = 0; - - nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RSIO, sio_data->ld, - reg, 0, &tmp); - return tmp; -} - -static void superio_wmi_outb(struct nct6775_sio_data *sio_data, int reg, int val) -{ - nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WSIO, sio_data->ld, - reg, val, NULL); -} - -static void superio_wmi_select(struct nct6775_sio_data *sio_data, int ld) -{ - sio_data->ld = ld; -} - -static int superio_wmi_enter(struct nct6775_sio_data *sio_data) -{ - return 0; -} - -static void superio_wmi_exit(struct nct6775_sio_data *sio_data) -{ -} - -static void superio_outb(struct nct6775_sio_data *sio_data, int reg, int val) -{ - int ioreg = sio_data->sioreg; - - outb(reg, ioreg); - outb(val, ioreg + 1); -} - -static int superio_inb(struct nct6775_sio_data *sio_data, int reg) -{ - int ioreg = sio_data->sioreg; - - outb(reg, ioreg); - return inb(ioreg + 1); -} - -static void superio_select(struct nct6775_sio_data *sio_data, int ld) -{ - int ioreg = sio_data->sioreg; - - outb(SIO_REG_LDSEL, ioreg); - outb(ld, ioreg + 1); -} - -static int superio_enter(struct nct6775_sio_data *sio_data) -{ - int ioreg = sio_data->sioreg; - - /* - * Try to reserve and for exclusive access. - */ - if (!request_muxed_region(ioreg, 2, DRVNAME)) - return -EBUSY; - - outb(0x87, ioreg); - outb(0x87, ioreg); - - return 0; -} - -static void superio_exit(struct nct6775_sio_data *sio_data) -{ - int ioreg = sio_data->sioreg; - - outb(0xaa, ioreg); - outb(0x02, ioreg); - outb(0x02, ioreg + 1); - release_region(ioreg, 2); -} - -/* - * ISA constants - */ - -#define IOREGION_ALIGNMENT (~7) -#define IOREGION_OFFSET 5 -#define IOREGION_LENGTH 2 -#define ADDR_REG_OFFSET 0 -#define DATA_REG_OFFSET 1 - -#define NCT6775_REG_BANK 0x4E -#define NCT6775_REG_CONFIG 0x40 -#define NCT6775_PORT_CHIPID 0x58 - -/* - * Not currently used: - * REG_MAN_ID has the value 0x5ca3 for all supported chips. - * REG_CHIP_ID == 0x88/0xa1/0xc1 depending on chip model. - * REG_MAN_ID is at port 0x4f - * REG_CHIP_ID is at port 0x58 - */ - -#define NUM_TEMP 10 /* Max number of temp attribute sets w/ limits*/ -#define NUM_TEMP_FIXED 6 /* Max number of fixed temp attribute sets */ -#define NUM_TSI_TEMP 8 /* Max number of TSI temp register pairs */ - -#define NUM_REG_ALARM 7 /* Max number of alarm registers */ -#define NUM_REG_BEEP 5 /* Max number of beep registers */ - -#define NUM_FAN 7 - /* Common and NCT6775 specific data */ /* Voltage min/max registers for nr=7..14 are in bank 5 */ @@ -334,11 +93,6 @@ static const u16 NCT6775_REG_IN[] = { #define NCT6775_REG_DIODE 0x5E #define NCT6775_DIODE_MASK 0x02 -#define NCT6775_REG_FANDIV1 0x506 -#define NCT6775_REG_FANDIV2 0x507 - -#define NCT6775_REG_CR_FAN_DEBOUNCE 0xf0 - static const u16 NCT6775_REG_ALARM[NUM_REG_ALARM] = { 0x459, 0x45A, 0x45B }; /* 0..15 voltages, 16..23 fans, 24..29 temperatures, 30..31 intrusion */ @@ -352,10 +106,6 @@ static const s8 NCT6775_ALARM_BITS[] = { 4, 5, 13, -1, -1, -1, /* temp1..temp6 */ 12, -1 }; /* intrusion0, intrusion1 */ -#define FAN_ALARM_BASE 16 -#define TEMP_ALARM_BASE 24 -#define INTRUSION_ALARM_BASE 30 - static const u16 NCT6775_REG_BEEP[NUM_REG_BEEP] = { 0x56, 0x57, 0x453, 0x4e }; /* @@ -371,11 +121,6 @@ static const s8 NCT6775_BEEP_BITS[] = { 4, 5, 13, -1, -1, -1, /* temp1..temp6 */ 12, -1 }; /* intrusion0, intrusion1 */ -#define BEEP_ENABLE_BASE 15 - -static const u8 NCT6775_REG_CR_CASEOPEN_CLR[] = { 0xe6, 0xee }; -static const u8 NCT6775_CR_CASEOPEN_CLR_MASK[] = { 0x20, 0x01 }; - /* DC or PWM output fan configuration */ static const u8 NCT6775_REG_PWM_MODE[] = { 0x04, 0x04, 0x12 }; static const u8 NCT6775_PWM_MODE_MASK[] = { 0x01, 0x02, 0x01 }; @@ -691,8 +436,6 @@ static const u16 NCT6779_REG_TEMP_CRIT[32] = { /* NCT6791 specific data */ -#define NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE 0x28 - static const u16 NCT6791_REG_WEIGHT_TEMP_SEL[NUM_FAN] = { 0, 0x239 }; static const u16 NCT6791_REG_WEIGHT_TEMP_STEP[NUM_FAN] = { 0, 0x23a }; static const u16 NCT6791_REG_WEIGHT_TEMP_STEP_TOL[NUM_FAN] = { 0, 0x23b }; @@ -1192,165 +935,6 @@ static inline unsigned int tsi_temp_from_reg(unsigned int reg) * Data structures and manipulation thereof */ -struct nct6775_data { - int addr; /* IO base of hw monitor block */ - struct nct6775_sio_data *sio_data; - enum kinds kind; - const char *name; - - const struct attribute_group *groups[7]; - u8 num_groups; - - u16 reg_temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst, - * 3=temp_crit, 4=temp_lcrit - */ - u8 temp_src[NUM_TEMP]; - u16 reg_temp_config[NUM_TEMP]; - const char * const *temp_label; - u32 temp_mask; - u32 virt_temp_mask; - - u16 REG_CONFIG; - u16 REG_VBAT; - u16 REG_DIODE; - u8 DIODE_MASK; - - const s8 *ALARM_BITS; - const s8 *BEEP_BITS; - - const u16 *REG_VIN; - const u16 *REG_IN_MINMAX[2]; - - const u16 *REG_TARGET; - const u16 *REG_FAN; - const u16 *REG_FAN_MODE; - const u16 *REG_FAN_MIN; - const u16 *REG_FAN_PULSES; - const u16 *FAN_PULSE_SHIFT; - const u16 *REG_FAN_TIME[3]; - - const u16 *REG_TOLERANCE_H; - - const u8 *REG_PWM_MODE; - const u8 *PWM_MODE_MASK; - - const u16 *REG_PWM[7]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor, - * [3]=pwm_max, [4]=pwm_step, - * [5]=weight_duty_step, [6]=weight_duty_base - */ - const u16 *REG_PWM_READ; - - const u16 *REG_CRITICAL_PWM_ENABLE; - u8 CRITICAL_PWM_ENABLE_MASK; - const u16 *REG_CRITICAL_PWM; - - const u16 *REG_AUTO_TEMP; - const u16 *REG_AUTO_PWM; - - const u16 *REG_CRITICAL_TEMP; - const u16 *REG_CRITICAL_TEMP_TOLERANCE; - - const u16 *REG_TEMP_SOURCE; /* temp register sources */ - const u16 *REG_TEMP_SEL; - const u16 *REG_WEIGHT_TEMP_SEL; - const u16 *REG_WEIGHT_TEMP[3]; /* 0=base, 1=tolerance, 2=step */ - - const u16 *REG_TEMP_OFFSET; - - const u16 *REG_ALARM; - const u16 *REG_BEEP; - - const u16 *REG_TSI_TEMP; - - unsigned int (*fan_from_reg)(u16 reg, unsigned int divreg); - unsigned int (*fan_from_reg_min)(u16 reg, unsigned int divreg); - - struct mutex update_lock; - bool valid; /* true if following fields are valid */ - unsigned long last_updated; /* In jiffies */ - - /* Register values */ - u8 bank; /* current register bank */ - u8 in_num; /* number of in inputs we have */ - u8 in[15][3]; /* [0]=in, [1]=in_max, [2]=in_min */ - unsigned int rpm[NUM_FAN]; - u16 fan_min[NUM_FAN]; - u8 fan_pulses[NUM_FAN]; - u8 fan_div[NUM_FAN]; - u8 has_pwm; - u8 has_fan; /* some fan inputs can be disabled */ - u8 has_fan_min; /* some fans don't have min register */ - bool has_fan_div; - - u8 num_temp_alarms; /* 2, 3, or 6 */ - u8 num_temp_beeps; /* 2, 3, or 6 */ - u8 temp_fixed_num; /* 3 or 6 */ - u8 temp_type[NUM_TEMP_FIXED]; - s8 temp_offset[NUM_TEMP_FIXED]; - s16 temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst, - * 3=temp_crit, 4=temp_lcrit */ - s16 tsi_temp[NUM_TSI_TEMP]; - u64 alarms; - u64 beeps; - - u8 pwm_num; /* number of pwm */ - u8 pwm_mode[NUM_FAN]; /* 0->DC variable voltage, - * 1->PWM variable duty cycle - */ - enum pwm_enable pwm_enable[NUM_FAN]; - /* 0->off - * 1->manual - * 2->thermal cruise mode (also called SmartFan I) - * 3->fan speed cruise mode - * 4->SmartFan III - * 5->enhanced variable thermal cruise (SmartFan IV) - */ - u8 pwm[7][NUM_FAN]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor, - * [3]=pwm_max, [4]=pwm_step, - * [5]=weight_duty_step, [6]=weight_duty_base - */ - - u8 target_temp[NUM_FAN]; - u8 target_temp_mask; - u32 target_speed[NUM_FAN]; - u32 target_speed_tolerance[NUM_FAN]; - u8 speed_tolerance_limit; - - u8 temp_tolerance[2][NUM_FAN]; - u8 tolerance_mask; - - u8 fan_time[3][NUM_FAN]; /* 0 = stop_time, 1 = step_up, 2 = step_down */ - - /* Automatic fan speed control registers */ - int auto_pwm_num; - u8 auto_pwm[NUM_FAN][7]; - u8 auto_temp[NUM_FAN][7]; - u8 pwm_temp_sel[NUM_FAN]; - u8 pwm_weight_temp_sel[NUM_FAN]; - u8 weight_temp[3][NUM_FAN]; /* 0->temp_step, 1->temp_step_tol, - * 2->temp_base - */ - - u8 vid; - u8 vrm; - - bool have_vid; - - u16 have_temp; - u16 have_temp_fixed; - u16 have_tsi_temp; - u16 have_in; - - /* Remember extra register values over suspend/resume */ - u8 vbat; - u8 fandiv1; - u8 fandiv2; - u8 sio_reg_enable; - - struct regmap *regmap; - bool read_only; -}; - struct sensor_device_template { struct device_attribute dev_attr; union { @@ -1406,21 +990,6 @@ struct sensor_template_group { int base; }; -static inline umode_t nct6775_attr_mode(struct nct6775_data *data, struct attribute *attr) -{ - return data->read_only ? (attr->mode & ~0222) : attr->mode; -} - -static int nct6775_add_attr_group(struct nct6775_data *data, const struct attribute_group *group) -{ - /* Need to leave a NULL terminator at the end of data->groups */ - if (data->num_groups == ARRAY_SIZE(data->groups) - 1) - return -ENOBUFS; - - data->groups[data->num_groups++] = group; - return 0; -} - static int nct6775_add_template_attr_group(struct device *dev, struct nct6775_data *data, const struct sensor_template_group *tg, int repeat) { @@ -1495,7 +1064,7 @@ static int nct6775_add_template_attr_group(struct device *dev, struct nct6775_da return nct6775_add_attr_group(data, group); } -static bool is_word_sized(struct nct6775_data *data, u16 reg) +bool nct6775_reg_is_word_sized(struct nct6775_data *data, u16 reg) { switch (data->kind) { case nct6106: @@ -1552,122 +1121,7 @@ static bool is_word_sized(struct nct6775_data *data, u16 reg) } return false; } - -static inline void nct6775_wmi_set_bank(struct nct6775_data *data, u16 reg) -{ - u8 bank = reg >> 8; - - data->bank = bank; -} - -static int nct6775_wmi_reg_read(void *ctx, unsigned int reg, unsigned int *val) -{ - struct nct6775_data *data = ctx; - int err, word_sized = is_word_sized(data, reg); - u8 tmp = 0; - u16 res; - - nct6775_wmi_set_bank(data, reg); - - err = nct6775_asuswmi_read(data->bank, reg & 0xff, &tmp); - if (err) - return err; - - res = tmp; - if (word_sized) { - err = nct6775_asuswmi_read(data->bank, (reg & 0xff) + 1, &tmp); - if (err) - return err; - - res = (res << 8) + tmp; - } - *val = res; - return 0; -} - -static inline int nct6775_read_value(struct nct6775_data *data, u16 reg, u16 *value) -{ - unsigned int tmp; - int ret = regmap_read(data->regmap, reg, &tmp); - - if (!ret) - *value = tmp; - return ret; -} - -static int nct6775_wmi_reg_write(void *ctx, unsigned int reg, unsigned int value) -{ - struct nct6775_data *data = ctx; - int res, word_sized = is_word_sized(data, reg); - - nct6775_wmi_set_bank(data, reg); - - if (word_sized) { - res = nct6775_asuswmi_write(data->bank, reg & 0xff, value >> 8); - if (res) - return res; - - res = nct6775_asuswmi_write(data->bank, (reg & 0xff) + 1, value); - } else { - res = nct6775_asuswmi_write(data->bank, reg & 0xff, value); - } - - return res; -} - -static inline int nct6775_write_value(struct nct6775_data *data, u16 reg, u16 value) -{ - return regmap_write(data->regmap, reg, value); -} - -/* - * On older chips, only registers 0x50-0x5f are banked. - * On more recent chips, all registers are banked. - * Assume that is the case and set the bank number for each access. - * Cache the bank number so it only needs to be set if it changes. - */ -static inline void nct6775_set_bank(struct nct6775_data *data, u16 reg) -{ - u8 bank = reg >> 8; - - if (data->bank != bank) { - outb_p(NCT6775_REG_BANK, data->addr + ADDR_REG_OFFSET); - outb_p(bank, data->addr + DATA_REG_OFFSET); - data->bank = bank; - } -} - -static int nct6775_reg_read(void *ctx, unsigned int reg, unsigned int *val) -{ - struct nct6775_data *data = ctx; - int word_sized = is_word_sized(data, reg); - - nct6775_set_bank(data, reg); - outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET); - *val = inb_p(data->addr + DATA_REG_OFFSET); - if (word_sized) { - outb_p((reg & 0xff) + 1, - data->addr + ADDR_REG_OFFSET); - *val = (*val << 8) + inb_p(data->addr + DATA_REG_OFFSET); - } - return 0; -} - -static int nct6775_reg_write(void *ctx, unsigned int reg, unsigned int value) -{ - struct nct6775_data *data = ctx; - int word_sized = is_word_sized(data, reg); - - nct6775_set_bank(data, reg); - outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET); - if (word_sized) { - outb_p(value >> 8, data->addr + DATA_REG_OFFSET); - outb_p((reg & 0xff) + 1, - data->addr + ADDR_REG_OFFSET); - } - outb_p(value & 0xff, data->addr + DATA_REG_OFFSET); - return 0; -} +EXPORT_SYMBOL_GPL(nct6775_reg_is_word_sized); /* We left-align 8-bit temperature values to make the code simpler */ static int nct6775_read_temp(struct nct6775_data *data, u16 reg, u16 *val) @@ -1678,19 +1132,12 @@ static int nct6775_read_temp(struct nct6775_data *data, u16 reg, u16 *val) if (err) return err; - if (!is_word_sized(data, reg)) + if (!nct6775_reg_is_word_sized(data, reg)) *val <<= 8; return 0; } -static int nct6775_write_temp(struct nct6775_data *data, u16 reg, u16 value) -{ - if (!is_word_sized(data, reg)) - value >>= 8; - return nct6775_write_value(data, reg, value); -} - /* This function assumes that the caller holds data->update_lock */ static int nct6775_write_fan_div(struct nct6775_data *data, int nr) { @@ -2207,8 +1654,8 @@ store_in_reg(struct device *dev, struct device_attribute *attr, const char *buf, return err ? : count; } -static ssize_t -show_alarm(struct device *dev, struct device_attribute *attr, char *buf) +ssize_t +nct6775_show_alarm(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); @@ -2221,6 +1668,7 @@ show_alarm(struct device *dev, struct device_attribute *attr, char *buf) return sprintf(buf, "%u\n", (unsigned int)((data->alarms >> nr) & 0x01)); } +EXPORT_SYMBOL_GPL(nct6775_show_alarm); static int find_temp_source(struct nct6775_data *data, int index, int count) { @@ -2263,8 +1711,8 @@ show_temp_alarm(struct device *dev, struct device_attribute *attr, char *buf) return sprintf(buf, "%u\n", alarm); } -static ssize_t -show_beep(struct device *dev, struct device_attribute *attr, char *buf) +ssize_t +nct6775_show_beep(struct device *dev, struct device_attribute *attr, char *buf) { struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); struct nct6775_data *data = nct6775_update_device(dev); @@ -2278,10 +1726,10 @@ show_beep(struct device *dev, struct device_attribute *attr, char *buf) return sprintf(buf, "%u\n", (unsigned int)((data->beeps >> nr) & 0x01)); } +EXPORT_SYMBOL_GPL(nct6775_show_beep); -static ssize_t -store_beep(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) +ssize_t +nct6775_store_beep(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); struct nct6775_data *data = dev_get_drvdata(dev); @@ -2306,6 +1754,7 @@ store_beep(struct device *dev, struct device_attribute *attr, const char *buf, mutex_unlock(&data->update_lock); return err ? : count; } +EXPORT_SYMBOL_GPL(nct6775_store_beep); static ssize_t show_temp_beep(struct device *dev, struct device_attribute *attr, char *buf) @@ -2381,8 +1830,8 @@ static umode_t nct6775_in_is_visible(struct kobject *kobj, } SENSOR_TEMPLATE_2(in_input, "in%d_input", 0444, show_in_reg, NULL, 0, 0); -SENSOR_TEMPLATE(in_alarm, "in%d_alarm", 0444, show_alarm, NULL, 0); -SENSOR_TEMPLATE(in_beep, "in%d_beep", 0644, show_beep, store_beep, 0); +SENSOR_TEMPLATE(in_alarm, "in%d_alarm", 0444, nct6775_show_alarm, NULL, 0); +SENSOR_TEMPLATE(in_beep, "in%d_beep", 0644, nct6775_show_beep, nct6775_store_beep, 0); SENSOR_TEMPLATE_2(in_min, "in%d_min", 0644, show_in_reg, store_in_reg, 0, 1); SENSOR_TEMPLATE_2(in_max, "in%d_max", 0644, show_in_reg, store_in_reg, 0, 2); @@ -2614,8 +2063,9 @@ static umode_t nct6775_fan_is_visible(struct kobject *kobj, } SENSOR_TEMPLATE(fan_input, "fan%d_input", 0444, show_fan, NULL, 0); -SENSOR_TEMPLATE(fan_alarm, "fan%d_alarm", 0444, show_alarm, NULL, FAN_ALARM_BASE); -SENSOR_TEMPLATE(fan_beep, "fan%d_beep", 0644, show_beep, store_beep, FAN_ALARM_BASE); +SENSOR_TEMPLATE(fan_alarm, "fan%d_alarm", 0444, nct6775_show_alarm, NULL, FAN_ALARM_BASE); +SENSOR_TEMPLATE(fan_beep, "fan%d_beep", 0644, nct6775_show_beep, + nct6775_store_beep, FAN_ALARM_BASE); SENSOR_TEMPLATE(fan_pulses, "fan%d_pulses", 0644, show_fan_pulses, store_fan_pulses, 0); SENSOR_TEMPLATE(fan_min, "fan%d_min", 0644, show_fan_min, store_fan_min, 0); SENSOR_TEMPLATE(fan_div, "fan%d_div", 0444, show_fan_div, NULL, 0); @@ -3857,109 +3307,6 @@ static const struct sensor_template_group nct6775_pwm_template_group = { .base = 1, }; -static ssize_t -cpu0_vid_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct nct6775_data *data = dev_get_drvdata(dev); - - return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); -} - -static DEVICE_ATTR_RO(cpu0_vid); - -/* Case open detection */ - -static ssize_t -clear_caseopen(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct nct6775_data *data = dev_get_drvdata(dev); - struct nct6775_sio_data *sio_data = data->sio_data; - int nr = to_sensor_dev_attr(attr)->index - INTRUSION_ALARM_BASE; - unsigned long val; - u8 reg; - int ret; - - if (kstrtoul(buf, 10, &val) || val != 0) - return -EINVAL; - - mutex_lock(&data->update_lock); - - /* - * Use CR registers to clear caseopen status. - * The CR registers are the same for all chips, and not all chips - * support clearing the caseopen status through "regular" registers. - */ - ret = sio_data->sio_enter(sio_data); - if (ret) { - count = ret; - goto error; - } - - sio_data->sio_select(sio_data, NCT6775_LD_ACPI); - reg = sio_data->sio_inb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr]); - reg |= NCT6775_CR_CASEOPEN_CLR_MASK[nr]; - sio_data->sio_outb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg); - reg &= ~NCT6775_CR_CASEOPEN_CLR_MASK[nr]; - sio_data->sio_outb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg); - sio_data->sio_exit(sio_data); - - data->valid = false; /* Force cache refresh */ -error: - mutex_unlock(&data->update_lock); - return count; -} - -static SENSOR_DEVICE_ATTR(intrusion0_alarm, 0644, show_alarm, clear_caseopen, INTRUSION_ALARM_BASE); -static SENSOR_DEVICE_ATTR(intrusion1_alarm, 0644, show_alarm, - clear_caseopen, INTRUSION_ALARM_BASE + 1); -static SENSOR_DEVICE_ATTR(intrusion0_beep, 0644, show_beep, store_beep, INTRUSION_ALARM_BASE); -static SENSOR_DEVICE_ATTR(intrusion1_beep, 0644, show_beep, store_beep, INTRUSION_ALARM_BASE + 1); -static SENSOR_DEVICE_ATTR(beep_enable, 0644, show_beep, store_beep, BEEP_ENABLE_BASE); - -static umode_t nct6775_other_is_visible(struct kobject *kobj, - struct attribute *attr, int index) -{ - struct device *dev = kobj_to_dev(kobj); - struct nct6775_data *data = dev_get_drvdata(dev); - - if (index == 0 && !data->have_vid) - return 0; - - if (index == 1 || index == 2) { - if (data->ALARM_BITS[INTRUSION_ALARM_BASE + index - 1] < 0) - return 0; - } - - if (index == 3 || index == 4) { - if (data->BEEP_BITS[INTRUSION_ALARM_BASE + index - 3] < 0) - return 0; - } - - return nct6775_attr_mode(data, attr); -} - -/* - * nct6775_other_is_visible uses the index into the following array - * to determine if attributes should be created or not. - * Any change in order or content must be matched. - */ -static struct attribute *nct6775_attributes_other[] = { - &dev_attr_cpu0_vid.attr, /* 0 */ - &sensor_dev_attr_intrusion0_alarm.dev_attr.attr, /* 1 */ - &sensor_dev_attr_intrusion1_alarm.dev_attr.attr, /* 2 */ - &sensor_dev_attr_intrusion0_beep.dev_attr.attr, /* 3 */ - &sensor_dev_attr_intrusion1_beep.dev_attr.attr, /* 4 */ - &sensor_dev_attr_beep_enable.dev_attr.attr, /* 5 */ - - NULL -}; - -static const struct attribute_group nct6775_group_other = { - .attrs = nct6775_attributes_other, - .is_visible = nct6775_other_is_visible, -}; - static inline int nct6775_init_device(struct nct6775_data *data) { int i, err; @@ -4020,227 +3367,6 @@ static inline int nct6775_init_device(struct nct6775_data *data) return 0; } -static void -nct6775_check_fan_inputs(struct nct6775_data *data, struct nct6775_sio_data *sio_data) -{ - bool fan3pin = false, fan4pin = false, fan4min = false; - bool fan5pin = false, fan6pin = false, fan7pin = false; - bool pwm3pin = false, pwm4pin = false, pwm5pin = false; - bool pwm6pin = false, pwm7pin = false; - - /* Store SIO_REG_ENABLE for use during resume */ - sio_data->sio_select(sio_data, NCT6775_LD_HWM); - data->sio_reg_enable = sio_data->sio_inb(sio_data, SIO_REG_ENABLE); - - /* fan4 and fan5 share some pins with the GPIO and serial flash */ - if (data->kind == nct6775) { - int cr2c = sio_data->sio_inb(sio_data, 0x2c); - - fan3pin = cr2c & BIT(6); - pwm3pin = cr2c & BIT(7); - - /* On NCT6775, fan4 shares pins with the fdc interface */ - fan4pin = !(sio_data->sio_inb(sio_data, 0x2A) & 0x80); - } else if (data->kind == nct6776) { - bool gpok = sio_data->sio_inb(sio_data, 0x27) & 0x80; - const char *board_vendor, *board_name; - - board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); - board_name = dmi_get_system_info(DMI_BOARD_NAME); - - if (board_name && board_vendor && - !strcmp(board_vendor, "ASRock")) { - /* - * Auxiliary fan monitoring is not enabled on ASRock - * Z77 Pro4-M if booted in UEFI Ultra-FastBoot mode. - * Observed with BIOS version 2.00. - */ - if (!strcmp(board_name, "Z77 Pro4-M")) { - if ((data->sio_reg_enable & 0xe0) != 0xe0) { - data->sio_reg_enable |= 0xe0; - sio_data->sio_outb(sio_data, SIO_REG_ENABLE, - data->sio_reg_enable); - } - } - } - - if (data->sio_reg_enable & 0x80) - fan3pin = gpok; - else - fan3pin = !(sio_data->sio_inb(sio_data, 0x24) & 0x40); - - if (data->sio_reg_enable & 0x40) - fan4pin = gpok; - else - fan4pin = sio_data->sio_inb(sio_data, 0x1C) & 0x01; - - if (data->sio_reg_enable & 0x20) - fan5pin = gpok; - else - fan5pin = sio_data->sio_inb(sio_data, 0x1C) & 0x02; - - fan4min = fan4pin; - pwm3pin = fan3pin; - } else if (data->kind == nct6106) { - int cr24 = sio_data->sio_inb(sio_data, 0x24); - - fan3pin = !(cr24 & 0x80); - pwm3pin = cr24 & 0x08; - } else if (data->kind == nct6116) { - int cr1a = sio_data->sio_inb(sio_data, 0x1a); - int cr1b = sio_data->sio_inb(sio_data, 0x1b); - int cr24 = sio_data->sio_inb(sio_data, 0x24); - int cr2a = sio_data->sio_inb(sio_data, 0x2a); - int cr2b = sio_data->sio_inb(sio_data, 0x2b); - int cr2f = sio_data->sio_inb(sio_data, 0x2f); - - fan3pin = !(cr2b & 0x10); - fan4pin = (cr2b & 0x80) || // pin 1(2) - (!(cr2f & 0x10) && (cr1a & 0x04)); // pin 65(66) - fan5pin = (cr2b & 0x80) || // pin 126(127) - (!(cr1b & 0x03) && (cr2a & 0x02)); // pin 94(96) - - pwm3pin = fan3pin && (cr24 & 0x08); - pwm4pin = fan4pin; - pwm5pin = fan5pin; - } else { - /* - * NCT6779D, NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, - * NCT6797D, NCT6798D - */ - int cr1a = sio_data->sio_inb(sio_data, 0x1a); - int cr1b = sio_data->sio_inb(sio_data, 0x1b); - int cr1c = sio_data->sio_inb(sio_data, 0x1c); - int cr1d = sio_data->sio_inb(sio_data, 0x1d); - int cr2a = sio_data->sio_inb(sio_data, 0x2a); - int cr2b = sio_data->sio_inb(sio_data, 0x2b); - int cr2d = sio_data->sio_inb(sio_data, 0x2d); - int cr2f = sio_data->sio_inb(sio_data, 0x2f); - bool dsw_en = cr2f & BIT(3); - bool ddr4_en = cr2f & BIT(4); - int cre0; - int creb; - int cred; - - sio_data->sio_select(sio_data, NCT6775_LD_12); - cre0 = sio_data->sio_inb(sio_data, 0xe0); - creb = sio_data->sio_inb(sio_data, 0xeb); - cred = sio_data->sio_inb(sio_data, 0xed); - - fan3pin = !(cr1c & BIT(5)); - fan4pin = !(cr1c & BIT(6)); - fan5pin = !(cr1c & BIT(7)); - - pwm3pin = !(cr1c & BIT(0)); - pwm4pin = !(cr1c & BIT(1)); - pwm5pin = !(cr1c & BIT(2)); - - switch (data->kind) { - case nct6791: - fan6pin = cr2d & BIT(1); - pwm6pin = cr2d & BIT(0); - break; - case nct6792: - fan6pin = !dsw_en && (cr2d & BIT(1)); - pwm6pin = !dsw_en && (cr2d & BIT(0)); - break; - case nct6793: - fan5pin |= cr1b & BIT(5); - fan5pin |= creb & BIT(5); - - fan6pin = !dsw_en && (cr2d & BIT(1)); - fan6pin |= creb & BIT(3); - - pwm5pin |= cr2d & BIT(7); - pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0)); - - pwm6pin = !dsw_en && (cr2d & BIT(0)); - pwm6pin |= creb & BIT(2); - break; - case nct6795: - fan5pin |= cr1b & BIT(5); - fan5pin |= creb & BIT(5); - - fan6pin = (cr2a & BIT(4)) && - (!dsw_en || (cred & BIT(4))); - fan6pin |= creb & BIT(3); - - pwm5pin |= cr2d & BIT(7); - pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0)); - - pwm6pin = (cr2a & BIT(3)) && (cred & BIT(2)); - pwm6pin |= creb & BIT(2); - break; - case nct6796: - fan5pin |= cr1b & BIT(5); - fan5pin |= (cre0 & BIT(3)) && !(cr1b & BIT(0)); - fan5pin |= creb & BIT(5); - - fan6pin = (cr2a & BIT(4)) && - (!dsw_en || (cred & BIT(4))); - fan6pin |= creb & BIT(3); - - fan7pin = !(cr2b & BIT(2)); - - pwm5pin |= cr2d & BIT(7); - pwm5pin |= (cre0 & BIT(4)) && !(cr1b & BIT(0)); - pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0)); - - pwm6pin = (cr2a & BIT(3)) && (cred & BIT(2)); - pwm6pin |= creb & BIT(2); - - pwm7pin = !(cr1d & (BIT(2) | BIT(3))); - break; - case nct6797: - fan5pin |= !ddr4_en && (cr1b & BIT(5)); - fan5pin |= creb & BIT(5); - - fan6pin = cr2a & BIT(4); - fan6pin |= creb & BIT(3); - - fan7pin = cr1a & BIT(1); - - pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0)); - pwm5pin |= !ddr4_en && (cr2d & BIT(7)); - - pwm6pin = creb & BIT(2); - pwm6pin |= cred & BIT(2); - - pwm7pin = cr1d & BIT(4); - break; - case nct6798: - fan6pin = !(cr1b & BIT(0)) && (cre0 & BIT(3)); - fan6pin |= cr2a & BIT(4); - fan6pin |= creb & BIT(5); - - fan7pin = cr1b & BIT(5); - fan7pin |= !(cr2b & BIT(2)); - fan7pin |= creb & BIT(3); - - pwm6pin = !(cr1b & BIT(0)) && (cre0 & BIT(4)); - pwm6pin |= !(cred & BIT(2)) && (cr2a & BIT(3)); - pwm6pin |= (creb & BIT(4)) && !(cr2a & BIT(0)); - - pwm7pin = !(cr1d & (BIT(2) | BIT(3))); - pwm7pin |= cr2d & BIT(7); - pwm7pin |= creb & BIT(2); - break; - default: /* NCT6779D */ - break; - } - - fan4min = fan4pin; - } - - /* fan 1 and 2 (0x03) are always present */ - data->has_fan = 0x03 | (fan3pin << 2) | (fan4pin << 3) | - (fan5pin << 4) | (fan6pin << 5) | (fan7pin << 6); - data->has_fan_min = 0x03 | (fan3pin << 2) | (fan4min << 3) | - (fan5pin << 4) | (fan6pin << 5) | (fan7pin << 6); - data->has_pwm = 0x03 | (pwm3pin << 2) | (pwm4pin << 3) | - (pwm5pin << 4) | (pwm6pin << 5) | (pwm7pin << 6); -} - static int add_temp_sensors(struct nct6775_data *data, const u16 *regp, int *available, int *mask) { @@ -4272,26 +3398,9 @@ static int add_temp_sensors(struct nct6775_data *data, const u16 *regp, return 0; } -static const struct regmap_config nct6775_regmap_config = { - .reg_bits = 16, - .val_bits = 16, - .reg_read = nct6775_reg_read, - .reg_write = nct6775_reg_write, -}; - -static const struct regmap_config nct6775_wmi_regmap_config = { - .reg_bits = 16, - .val_bits = 16, - .reg_read = nct6775_wmi_reg_read, - .reg_write = nct6775_wmi_reg_write, -}; - -static int nct6775_probe(struct platform_device *pdev) +int nct6775_probe(struct device *dev, struct nct6775_data *data, + const struct regmap_config *regmapcfg) { - struct device *dev = &pdev->dev; - struct nct6775_sio_data *sio_data = dev_get_platdata(dev); - struct nct6775_data *data; - struct resource *res; int i, s, err = 0; int mask, available; u16 src; @@ -4299,32 +3408,8 @@ static int nct6775_probe(struct platform_device *pdev) const u16 *reg_temp_mon, *reg_temp_alternate, *reg_temp_crit; const u16 *reg_temp_crit_l = NULL, *reg_temp_crit_h = NULL; int num_reg_temp, num_reg_temp_mon, num_reg_tsi_temp; - u8 cr2a; struct device *hwmon_dev; struct sensor_template_group tsi_temp_tg; - const struct regmap_config *regmapcfg; - - if (sio_data->access == access_direct) { - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (!devm_request_region(&pdev->dev, res->start, IOREGION_LENGTH, - DRVNAME)) - return -EBUSY; - } - - data = devm_kzalloc(&pdev->dev, sizeof(struct nct6775_data), - GFP_KERNEL); - if (!data) - return -ENOMEM; - - data->kind = sio_data->kind; - data->sio_data = sio_data; - - if (sio_data->access == access_direct) { - data->addr = res->start; - regmapcfg = &nct6775_regmap_config; - } else { - regmapcfg = &nct6775_wmi_regmap_config; - } data->regmap = devm_regmap_init(dev, NULL, data, regmapcfg); if (IS_ERR(data->regmap)) @@ -4333,7 +3418,6 @@ static int nct6775_probe(struct platform_device *pdev) mutex_init(&data->update_lock); data->name = nct6775_device_names[data->kind]; data->bank = 0xff; /* Force initial bank selection */ - platform_set_drvdata(pdev, data); switch (data->kind) { case nct6106: @@ -5068,79 +4152,12 @@ static int nct6775_probe(struct platform_device *pdev) if (err) return err; - err = sio_data->sio_enter(sio_data); - if (err) - return err; - - cr2a = sio_data->sio_inb(sio_data, 0x2a); - switch (data->kind) { - case nct6775: - data->have_vid = (cr2a & 0x40); - break; - case nct6776: - data->have_vid = (cr2a & 0x60) == 0x40; - break; - case nct6106: - case nct6116: - case nct6779: - case nct6791: - case nct6792: - case nct6793: - case nct6795: - case nct6796: - case nct6797: - case nct6798: - break; - } - - /* - * Read VID value - * We can get the VID input values directly at logical device D 0xe3. - */ - if (data->have_vid) { - sio_data->sio_select(sio_data, NCT6775_LD_VID); - data->vid = sio_data->sio_inb(sio_data, 0xe3); - data->vrm = vid_which_vrm(); - } - - if (fan_debounce) { - u8 tmp; - - sio_data->sio_select(sio_data, NCT6775_LD_HWM); - tmp = sio_data->sio_inb(sio_data, - NCT6775_REG_CR_FAN_DEBOUNCE); - switch (data->kind) { - case nct6106: - case nct6116: - tmp |= 0xe0; - break; - case nct6775: - tmp |= 0x1e; - break; - case nct6776: - case nct6779: - tmp |= 0x3e; - break; - case nct6791: - case nct6792: - case nct6793: - case nct6795: - case nct6796: - case nct6797: - case nct6798: - tmp |= 0x7e; - break; - } - sio_data->sio_outb(sio_data, NCT6775_REG_CR_FAN_DEBOUNCE, - tmp); - dev_info(&pdev->dev, "Enabled fan debounce for chip %s\n", - data->name); + if (data->driver_init) { + err = data->driver_init(data); + if (err) + return err; } - nct6775_check_fan_inputs(data, sio_data); - - sio_data->sio_exit(sio_data); - /* Read fan clock dividers immediately */ err = nct6775_init_fan_common(dev, data); if (err) @@ -5177,430 +4194,12 @@ static int nct6775_probe(struct platform_device *pdev) return err; } - err = nct6775_add_attr_group(data, &nct6775_group_other); - if (err) - return err; - hwmon_dev = devm_hwmon_device_register_with_groups(dev, data->name, data, data->groups); return PTR_ERR_OR_ZERO(hwmon_dev); } - -static void nct6791_enable_io_mapping(struct nct6775_sio_data *sio_data) -{ - int val; - - val = sio_data->sio_inb(sio_data, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE); - if (val & 0x10) { - pr_info("Enabling hardware monitor logical device mappings.\n"); - sio_data->sio_outb(sio_data, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE, - val & ~0x10); - } -} - -static int __maybe_unused nct6775_suspend(struct device *dev) -{ - int err; - u16 tmp; - struct nct6775_data *data = nct6775_update_device(dev); - - if (IS_ERR(data)) - return PTR_ERR(data); - - mutex_lock(&data->update_lock); - err = nct6775_read_value(data, data->REG_VBAT, &tmp); - if (err) - goto out; - data->vbat = tmp; - if (data->kind == nct6775) { - err = nct6775_read_value(data, NCT6775_REG_FANDIV1, &tmp); - if (err) - goto out; - data->fandiv1 = tmp; - - err = nct6775_read_value(data, NCT6775_REG_FANDIV2, &tmp); - if (err) - goto out; - data->fandiv2 = tmp; - } -out: - mutex_unlock(&data->update_lock); - - return err; -} - -static int __maybe_unused nct6775_resume(struct device *dev) -{ - struct nct6775_data *data = dev_get_drvdata(dev); - struct nct6775_sio_data *sio_data = dev_get_platdata(dev); - int i, j, err = 0; - u8 reg; - - mutex_lock(&data->update_lock); - data->bank = 0xff; /* Force initial bank selection */ - - err = sio_data->sio_enter(sio_data); - if (err) - goto abort; - - sio_data->sio_select(sio_data, NCT6775_LD_HWM); - reg = sio_data->sio_inb(sio_data, SIO_REG_ENABLE); - if (reg != data->sio_reg_enable) - sio_data->sio_outb(sio_data, SIO_REG_ENABLE, data->sio_reg_enable); - - if (data->kind == nct6791 || data->kind == nct6792 || - data->kind == nct6793 || data->kind == nct6795 || - data->kind == nct6796 || data->kind == nct6797 || - data->kind == nct6798) - nct6791_enable_io_mapping(sio_data); - - sio_data->sio_exit(sio_data); - - /* Restore limits */ - for (i = 0; i < data->in_num; i++) { - if (!(data->have_in & BIT(i))) - continue; - - err = nct6775_write_value(data, data->REG_IN_MINMAX[0][i], data->in[i][1]); - if (err) - goto abort; - err = nct6775_write_value(data, data->REG_IN_MINMAX[1][i], data->in[i][2]); - if (err) - goto abort; - } - - for (i = 0; i < ARRAY_SIZE(data->fan_min); i++) { - if (!(data->has_fan_min & BIT(i))) - continue; - - err = nct6775_write_value(data, data->REG_FAN_MIN[i], data->fan_min[i]); - if (err) - goto abort; - } - - for (i = 0; i < NUM_TEMP; i++) { - if (!(data->have_temp & BIT(i))) - continue; - - for (j = 1; j < ARRAY_SIZE(data->reg_temp); j++) - if (data->reg_temp[j][i]) { - err = nct6775_write_temp(data, data->reg_temp[j][i], - data->temp[j][i]); - if (err) - goto abort; - } - } - - /* Restore other settings */ - err = nct6775_write_value(data, data->REG_VBAT, data->vbat); - if (err) - goto abort; - if (data->kind == nct6775) { - err = nct6775_write_value(data, NCT6775_REG_FANDIV1, data->fandiv1); - if (err) - goto abort; - err = nct6775_write_value(data, NCT6775_REG_FANDIV2, data->fandiv2); - } - -abort: - /* Force re-reading all values */ - data->valid = false; - mutex_unlock(&data->update_lock); - - return err; -} - -static SIMPLE_DEV_PM_OPS(nct6775_dev_pm_ops, nct6775_suspend, nct6775_resume); - -static struct platform_driver nct6775_driver = { - .driver = { - .name = DRVNAME, - .pm = &nct6775_dev_pm_ops, - }, - .probe = nct6775_probe, -}; - -/* nct6775_find() looks for a '627 in the Super-I/O config space */ -static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data) -{ - u16 val; - int err; - int addr; - - sio_data->access = access_direct; - sio_data->sioreg = sioaddr; - - err = sio_data->sio_enter(sio_data); - if (err) - return err; - - val = (sio_data->sio_inb(sio_data, SIO_REG_DEVID) << 8) | - sio_data->sio_inb(sio_data, SIO_REG_DEVID + 1); - if (force_id && val != 0xffff) - val = force_id; - - switch (val & SIO_ID_MASK) { - case SIO_NCT6106_ID: - sio_data->kind = nct6106; - break; - case SIO_NCT6116_ID: - sio_data->kind = nct6116; - break; - case SIO_NCT6775_ID: - sio_data->kind = nct6775; - break; - case SIO_NCT6776_ID: - sio_data->kind = nct6776; - break; - case SIO_NCT6779_ID: - sio_data->kind = nct6779; - break; - case SIO_NCT6791_ID: - sio_data->kind = nct6791; - break; - case SIO_NCT6792_ID: - sio_data->kind = nct6792; - break; - case SIO_NCT6793_ID: - sio_data->kind = nct6793; - break; - case SIO_NCT6795_ID: - sio_data->kind = nct6795; - break; - case SIO_NCT6796_ID: - sio_data->kind = nct6796; - break; - case SIO_NCT6797_ID: - sio_data->kind = nct6797; - break; - case SIO_NCT6798_ID: - sio_data->kind = nct6798; - break; - default: - if (val != 0xffff) - pr_debug("unsupported chip ID: 0x%04x\n", val); - sio_data->sio_exit(sio_data); - return -ENODEV; - } - - /* We have a known chip, find the HWM I/O address */ - sio_data->sio_select(sio_data, NCT6775_LD_HWM); - val = (sio_data->sio_inb(sio_data, SIO_REG_ADDR) << 8) - | sio_data->sio_inb(sio_data, SIO_REG_ADDR + 1); - addr = val & IOREGION_ALIGNMENT; - if (addr == 0) { - pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n"); - sio_data->sio_exit(sio_data); - return -ENODEV; - } - - /* Activate logical device if needed */ - val = sio_data->sio_inb(sio_data, SIO_REG_ENABLE); - if (!(val & 0x01)) { - pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n"); - sio_data->sio_outb(sio_data, SIO_REG_ENABLE, val | 0x01); - } - - if (sio_data->kind == nct6791 || sio_data->kind == nct6792 || - sio_data->kind == nct6793 || sio_data->kind == nct6795 || - sio_data->kind == nct6796 || sio_data->kind == nct6797 || - sio_data->kind == nct6798) - nct6791_enable_io_mapping(sio_data); - - sio_data->sio_exit(sio_data); - pr_info("Found %s or compatible chip at %#x:%#x\n", - nct6775_sio_names[sio_data->kind], sioaddr, addr); - - return addr; -} - -/* - * when Super-I/O functions move to a separate file, the Super-I/O - * bus will manage the lifetime of the device and this module will only keep - * track of the nct6775 driver. But since we use platform_device_alloc(), we - * must keep track of the device - */ -static struct platform_device *pdev[2]; - -static const char * const asus_wmi_boards[] = { - "ProArt X570-CREATOR WIFI", - "Pro B550M-C", - "Pro WS X570-ACE", - "PRIME B360-PLUS", - "PRIME B460-PLUS", - "PRIME B550-PLUS", - "PRIME B550M-A", - "PRIME B550M-A (WI-FI)", - "PRIME X570-P", - "PRIME X570-PRO", - "ROG CROSSHAIR VIII DARK HERO", - "ROG CROSSHAIR VIII FORMULA", - "ROG CROSSHAIR VIII HERO", - "ROG CROSSHAIR VIII IMPACT", - "ROG STRIX B550-A GAMING", - "ROG STRIX B550-E GAMING", - "ROG STRIX B550-F GAMING", - "ROG STRIX B550-F GAMING (WI-FI)", - "ROG STRIX B550-F GAMING WIFI II", - "ROG STRIX B550-I GAMING", - "ROG STRIX B550-XE GAMING (WI-FI)", - "ROG STRIX X570-E GAMING", - "ROG STRIX X570-F GAMING", - "ROG STRIX X570-I GAMING", - "ROG STRIX Z390-E GAMING", - "ROG STRIX Z390-F GAMING", - "ROG STRIX Z390-H GAMING", - "ROG STRIX Z390-I GAMING", - "ROG STRIX Z490-A GAMING", - "ROG STRIX Z490-E GAMING", - "ROG STRIX Z490-F GAMING", - "ROG STRIX Z490-G GAMING", - "ROG STRIX Z490-G GAMING (WI-FI)", - "ROG STRIX Z490-H GAMING", - "ROG STRIX Z490-I GAMING", - "TUF GAMING B550M-PLUS", - "TUF GAMING B550M-PLUS (WI-FI)", - "TUF GAMING B550-PLUS", - "TUF GAMING B550-PRO", - "TUF GAMING X570-PLUS", - "TUF GAMING X570-PLUS (WI-FI)", - "TUF GAMING X570-PRO (WI-FI)", - "TUF GAMING Z490-PLUS", - "TUF GAMING Z490-PLUS (WI-FI)", -}; - -static int __init sensors_nct6775_init(void) -{ - int i, err; - bool found = false; - int address; - struct resource res; - struct nct6775_sio_data sio_data; - int sioaddr[2] = { 0x2e, 0x4e }; - enum sensor_access access = access_direct; - const char *board_vendor, *board_name; - u8 tmp; - - err = platform_driver_register(&nct6775_driver); - if (err) - return err; - - board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); - board_name = dmi_get_system_info(DMI_BOARD_NAME); - - if (board_name && board_vendor && - !strcmp(board_vendor, "ASUSTeK COMPUTER INC.")) { - err = match_string(asus_wmi_boards, ARRAY_SIZE(asus_wmi_boards), - board_name); - if (err >= 0) { - /* if reading chip id via WMI succeeds, use WMI */ - if (!nct6775_asuswmi_read(0, NCT6775_PORT_CHIPID, &tmp) && tmp) { - pr_info("Using Asus WMI to access %#x chip.\n", tmp); - access = access_asuswmi; - } else { - pr_err("Can't read ChipID by Asus WMI.\n"); - } - } - } - - /* - * initialize sio_data->kind and sio_data->sioreg. - * - * when Super-I/O functions move to a separate file, the Super-I/O - * driver will probe 0x2e and 0x4e and auto-detect the presence of a - * nct6775 hardware monitor, and call probe() - */ - for (i = 0; i < ARRAY_SIZE(pdev); i++) { - sio_data.sio_outb = superio_outb; - sio_data.sio_inb = superio_inb; - sio_data.sio_select = superio_select; - sio_data.sio_enter = superio_enter; - sio_data.sio_exit = superio_exit; - - address = nct6775_find(sioaddr[i], &sio_data); - if (address <= 0) - continue; - - found = true; - - sio_data.access = access; - - if (access == access_asuswmi) { - sio_data.sio_outb = superio_wmi_outb; - sio_data.sio_inb = superio_wmi_inb; - sio_data.sio_select = superio_wmi_select; - sio_data.sio_enter = superio_wmi_enter; - sio_data.sio_exit = superio_wmi_exit; - } - - pdev[i] = platform_device_alloc(DRVNAME, address); - if (!pdev[i]) { - err = -ENOMEM; - goto exit_device_unregister; - } - - err = platform_device_add_data(pdev[i], &sio_data, - sizeof(struct nct6775_sio_data)); - if (err) - goto exit_device_put; - - if (sio_data.access == access_direct) { - memset(&res, 0, sizeof(res)); - res.name = DRVNAME; - res.start = address + IOREGION_OFFSET; - res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1; - res.flags = IORESOURCE_IO; - - err = acpi_check_resource_conflict(&res); - if (err) { - platform_device_put(pdev[i]); - pdev[i] = NULL; - continue; - } - - err = platform_device_add_resources(pdev[i], &res, 1); - if (err) - goto exit_device_put; - } - - /* platform_device_add calls probe() */ - err = platform_device_add(pdev[i]); - if (err) - goto exit_device_put; - } - if (!found) { - err = -ENODEV; - goto exit_unregister; - } - - return 0; - -exit_device_put: - platform_device_put(pdev[i]); -exit_device_unregister: - while (--i >= 0) { - if (pdev[i]) - platform_device_unregister(pdev[i]); - } -exit_unregister: - platform_driver_unregister(&nct6775_driver); - return err; -} - -static void __exit sensors_nct6775_exit(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(pdev); i++) { - if (pdev[i]) - platform_device_unregister(pdev[i]); - } - platform_driver_unregister(&nct6775_driver); -} +EXPORT_SYMBOL_GPL(nct6775_probe); MODULE_AUTHOR("Guenter Roeck "); -MODULE_DESCRIPTION("Driver for NCT6775F and compatible chips"); +MODULE_DESCRIPTION("Core driver for NCT6775F and compatible chips"); MODULE_LICENSE("GPL"); - -module_init(sensors_nct6775_init); -module_exit(sensors_nct6775_exit); diff --git a/drivers/hwmon/nct6775-platform.c b/drivers/hwmon/nct6775-platform.c new file mode 100644 index 000000000000..c2f76af735a2 --- /dev/null +++ b/drivers/hwmon/nct6775-platform.c @@ -0,0 +1,1226 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * nct6775 - Platform driver for the hardware monitoring + * functionality of Nuvoton NCT677x Super-I/O chips + * + * Copyright (C) 2012 Guenter Roeck + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "nct6775.h" + +enum sensor_access { access_direct, access_asuswmi }; + +static const char * const nct6775_sio_names[] __initconst = { + "NCT6106D", + "NCT6116D", + "NCT6775F", + "NCT6776D/F", + "NCT6779D", + "NCT6791D", + "NCT6792D", + "NCT6793D", + "NCT6795D", + "NCT6796D", + "NCT6797D", + "NCT6798D", +}; + +static unsigned short force_id; +module_param(force_id, ushort, 0); +MODULE_PARM_DESC(force_id, "Override the detected device ID"); + +static unsigned short fan_debounce; +module_param(fan_debounce, ushort, 0); +MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal"); + +#define DRVNAME "nct6775" + +#define NCT6775_PORT_CHIPID 0x58 + +/* + * ISA constants + */ + +#define IOREGION_ALIGNMENT (~7) +#define IOREGION_OFFSET 5 +#define IOREGION_LENGTH 2 +#define ADDR_REG_OFFSET 0 +#define DATA_REG_OFFSET 1 + +/* + * Super-I/O constants and functions + */ + +#define NCT6775_LD_ACPI 0x0a +#define NCT6775_LD_HWM 0x0b +#define NCT6775_LD_VID 0x0d +#define NCT6775_LD_12 0x12 + +#define SIO_REG_LDSEL 0x07 /* Logical device select */ +#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */ +#define SIO_REG_ENABLE 0x30 /* Logical device enable */ +#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ + +#define SIO_NCT6106_ID 0xc450 +#define SIO_NCT6116_ID 0xd280 +#define SIO_NCT6775_ID 0xb470 +#define SIO_NCT6776_ID 0xc330 +#define SIO_NCT6779_ID 0xc560 +#define SIO_NCT6791_ID 0xc800 +#define SIO_NCT6792_ID 0xc910 +#define SIO_NCT6793_ID 0xd120 +#define SIO_NCT6795_ID 0xd350 +#define SIO_NCT6796_ID 0xd420 +#define SIO_NCT6797_ID 0xd450 +#define SIO_NCT6798_ID 0xd428 +#define SIO_ID_MASK 0xFFF8 + +/* + * Control registers + */ +#define NCT6775_REG_CR_FAN_DEBOUNCE 0xf0 + +struct nct6775_sio_data { + int sioreg; + int ld; + enum kinds kind; + enum sensor_access access; + + /* superio_() callbacks */ + void (*sio_outb)(struct nct6775_sio_data *sio_data, int reg, int val); + int (*sio_inb)(struct nct6775_sio_data *sio_data, int reg); + void (*sio_select)(struct nct6775_sio_data *sio_data, int ld); + int (*sio_enter)(struct nct6775_sio_data *sio_data); + void (*sio_exit)(struct nct6775_sio_data *sio_data); +}; + +#define ASUSWMI_MONITORING_GUID "466747A0-70EC-11DE-8A39-0800200C9A66" +#define ASUSWMI_METHODID_RSIO 0x5253494F +#define ASUSWMI_METHODID_WSIO 0x5753494F +#define ASUSWMI_METHODID_RHWM 0x5248574D +#define ASUSWMI_METHODID_WHWM 0x5748574D +#define ASUSWMI_UNSUPPORTED_METHOD 0xFFFFFFFE + +static int nct6775_asuswmi_evaluate_method(u32 method_id, u8 bank, u8 reg, u8 val, u32 *retval) +{ +#if IS_ENABLED(CONFIG_ACPI_WMI) + u32 args = bank | (reg << 8) | (val << 16); + struct acpi_buffer input = { (acpi_size) sizeof(args), &args }; + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; + acpi_status status; + union acpi_object *obj; + u32 tmp = ASUSWMI_UNSUPPORTED_METHOD; + + status = wmi_evaluate_method(ASUSWMI_MONITORING_GUID, 0, + method_id, &input, &output); + + if (ACPI_FAILURE(status)) + return -EIO; + + obj = output.pointer; + if (obj && obj->type == ACPI_TYPE_INTEGER) + tmp = obj->integer.value; + + if (retval) + *retval = tmp; + + kfree(obj); + + if (tmp == ASUSWMI_UNSUPPORTED_METHOD) + return -ENODEV; + return 0; +#else + return -EOPNOTSUPP; +#endif +} + +static inline int nct6775_asuswmi_write(u8 bank, u8 reg, u8 val) +{ + return nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WHWM, bank, + reg, val, NULL); +} + +static inline int nct6775_asuswmi_read(u8 bank, u8 reg, u8 *val) +{ + u32 ret, tmp = 0; + + ret = nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RHWM, bank, + reg, 0, &tmp); + *val = tmp; + return ret; +} + +static int superio_wmi_inb(struct nct6775_sio_data *sio_data, int reg) +{ + int tmp = 0; + + nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RSIO, sio_data->ld, + reg, 0, &tmp); + return tmp; +} + +static void superio_wmi_outb(struct nct6775_sio_data *sio_data, int reg, int val) +{ + nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WSIO, sio_data->ld, + reg, val, NULL); +} + +static void superio_wmi_select(struct nct6775_sio_data *sio_data, int ld) +{ + sio_data->ld = ld; +} + +static int superio_wmi_enter(struct nct6775_sio_data *sio_data) +{ + return 0; +} + +static void superio_wmi_exit(struct nct6775_sio_data *sio_data) +{ +} + +static void superio_outb(struct nct6775_sio_data *sio_data, int reg, int val) +{ + int ioreg = sio_data->sioreg; + + outb(reg, ioreg); + outb(val, ioreg + 1); +} + +static int superio_inb(struct nct6775_sio_data *sio_data, int reg) +{ + int ioreg = sio_data->sioreg; + + outb(reg, ioreg); + return inb(ioreg + 1); +} + +static void superio_select(struct nct6775_sio_data *sio_data, int ld) +{ + int ioreg = sio_data->sioreg; + + outb(SIO_REG_LDSEL, ioreg); + outb(ld, ioreg + 1); +} + +static int superio_enter(struct nct6775_sio_data *sio_data) +{ + int ioreg = sio_data->sioreg; + + /* + * Try to reserve and for exclusive access. + */ + if (!request_muxed_region(ioreg, 2, DRVNAME)) + return -EBUSY; + + outb(0x87, ioreg); + outb(0x87, ioreg); + + return 0; +} + +static void superio_exit(struct nct6775_sio_data *sio_data) +{ + int ioreg = sio_data->sioreg; + + outb(0xaa, ioreg); + outb(0x02, ioreg); + outb(0x02, ioreg + 1); + release_region(ioreg, 2); +} + +static inline void nct6775_wmi_set_bank(struct nct6775_data *data, u16 reg) +{ + u8 bank = reg >> 8; + + data->bank = bank; +} + +static int nct6775_wmi_reg_read(void *ctx, unsigned int reg, unsigned int *val) +{ + struct nct6775_data *data = ctx; + int err, word_sized = nct6775_reg_is_word_sized(data, reg); + u8 tmp = 0; + u16 res; + + nct6775_wmi_set_bank(data, reg); + + err = nct6775_asuswmi_read(data->bank, reg & 0xff, &tmp); + if (err) + return err; + + res = tmp; + if (word_sized) { + err = nct6775_asuswmi_read(data->bank, (reg & 0xff) + 1, &tmp); + if (err) + return err; + + res = (res << 8) + tmp; + } + *val = res; + return 0; +} + +static int nct6775_wmi_reg_write(void *ctx, unsigned int reg, unsigned int value) +{ + struct nct6775_data *data = ctx; + int res, word_sized = nct6775_reg_is_word_sized(data, reg); + + nct6775_wmi_set_bank(data, reg); + + if (word_sized) { + res = nct6775_asuswmi_write(data->bank, reg & 0xff, value >> 8); + if (res) + return res; + + res = nct6775_asuswmi_write(data->bank, (reg & 0xff) + 1, value); + } else { + res = nct6775_asuswmi_write(data->bank, reg & 0xff, value); + } + + return res; +} + +/* + * On older chips, only registers 0x50-0x5f are banked. + * On more recent chips, all registers are banked. + * Assume that is the case and set the bank number for each access. + * Cache the bank number so it only needs to be set if it changes. + */ +static inline void nct6775_set_bank(struct nct6775_data *data, u16 reg) +{ + u8 bank = reg >> 8; + + if (data->bank != bank) { + outb_p(NCT6775_REG_BANK, data->addr + ADDR_REG_OFFSET); + outb_p(bank, data->addr + DATA_REG_OFFSET); + data->bank = bank; + } +} + +static int nct6775_reg_read(void *ctx, unsigned int reg, unsigned int *val) +{ + struct nct6775_data *data = ctx; + int word_sized = nct6775_reg_is_word_sized(data, reg); + + nct6775_set_bank(data, reg); + outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET); + *val = inb_p(data->addr + DATA_REG_OFFSET); + if (word_sized) { + outb_p((reg & 0xff) + 1, + data->addr + ADDR_REG_OFFSET); + *val = (*val << 8) + inb_p(data->addr + DATA_REG_OFFSET); + } + return 0; +} + +static int nct6775_reg_write(void *ctx, unsigned int reg, unsigned int value) +{ + struct nct6775_data *data = ctx; + int word_sized = nct6775_reg_is_word_sized(data, reg); + + nct6775_set_bank(data, reg); + outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET); + if (word_sized) { + outb_p(value >> 8, data->addr + DATA_REG_OFFSET); + outb_p((reg & 0xff) + 1, + data->addr + ADDR_REG_OFFSET); + } + outb_p(value & 0xff, data->addr + DATA_REG_OFFSET); + return 0; +} + +static void nct6791_enable_io_mapping(struct nct6775_sio_data *sio_data) +{ + int val; + + val = sio_data->sio_inb(sio_data, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE); + if (val & 0x10) { + pr_info("Enabling hardware monitor logical device mappings.\n"); + sio_data->sio_outb(sio_data, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE, + val & ~0x10); + } +} + +static int __maybe_unused nct6775_suspend(struct device *dev) +{ + int err; + u16 tmp; + struct nct6775_data *data = dev_get_drvdata(dev); + + if (IS_ERR(data)) + return PTR_ERR(data); + + mutex_lock(&data->update_lock); + err = nct6775_read_value(data, data->REG_VBAT, &tmp); + if (err) + goto out; + data->vbat = tmp; + if (data->kind == nct6775) { + err = nct6775_read_value(data, NCT6775_REG_FANDIV1, &tmp); + if (err) + goto out; + data->fandiv1 = tmp; + + err = nct6775_read_value(data, NCT6775_REG_FANDIV2, &tmp); + if (err) + goto out; + data->fandiv2 = tmp; + } +out: + mutex_unlock(&data->update_lock); + + return err; +} + +static int __maybe_unused nct6775_resume(struct device *dev) +{ + struct nct6775_data *data = dev_get_drvdata(dev); + struct nct6775_sio_data *sio_data = dev_get_platdata(dev); + int i, j, err = 0; + u8 reg; + + mutex_lock(&data->update_lock); + data->bank = 0xff; /* Force initial bank selection */ + + err = sio_data->sio_enter(sio_data); + if (err) + goto abort; + + sio_data->sio_select(sio_data, NCT6775_LD_HWM); + reg = sio_data->sio_inb(sio_data, SIO_REG_ENABLE); + if (reg != data->sio_reg_enable) + sio_data->sio_outb(sio_data, SIO_REG_ENABLE, data->sio_reg_enable); + + if (data->kind == nct6791 || data->kind == nct6792 || + data->kind == nct6793 || data->kind == nct6795 || + data->kind == nct6796 || data->kind == nct6797 || + data->kind == nct6798) + nct6791_enable_io_mapping(sio_data); + + sio_data->sio_exit(sio_data); + + /* Restore limits */ + for (i = 0; i < data->in_num; i++) { + if (!(data->have_in & BIT(i))) + continue; + + err = nct6775_write_value(data, data->REG_IN_MINMAX[0][i], data->in[i][1]); + if (err) + goto abort; + err = nct6775_write_value(data, data->REG_IN_MINMAX[1][i], data->in[i][2]); + if (err) + goto abort; + } + + for (i = 0; i < ARRAY_SIZE(data->fan_min); i++) { + if (!(data->has_fan_min & BIT(i))) + continue; + + err = nct6775_write_value(data, data->REG_FAN_MIN[i], data->fan_min[i]); + if (err) + goto abort; + } + + for (i = 0; i < NUM_TEMP; i++) { + if (!(data->have_temp & BIT(i))) + continue; + + for (j = 1; j < ARRAY_SIZE(data->reg_temp); j++) + if (data->reg_temp[j][i]) { + err = nct6775_write_temp(data, data->reg_temp[j][i], + data->temp[j][i]); + if (err) + goto abort; + } + } + + /* Restore other settings */ + err = nct6775_write_value(data, data->REG_VBAT, data->vbat); + if (err) + goto abort; + if (data->kind == nct6775) { + err = nct6775_write_value(data, NCT6775_REG_FANDIV1, data->fandiv1); + if (err) + goto abort; + err = nct6775_write_value(data, NCT6775_REG_FANDIV2, data->fandiv2); + } + +abort: + /* Force re-reading all values */ + data->valid = false; + mutex_unlock(&data->update_lock); + + return err; +} + +static SIMPLE_DEV_PM_OPS(nct6775_dev_pm_ops, nct6775_suspend, nct6775_resume); + +static void +nct6775_check_fan_inputs(struct nct6775_data *data, struct nct6775_sio_data *sio_data) +{ + bool fan3pin = false, fan4pin = false, fan4min = false; + bool fan5pin = false, fan6pin = false, fan7pin = false; + bool pwm3pin = false, pwm4pin = false, pwm5pin = false; + bool pwm6pin = false, pwm7pin = false; + + /* Store SIO_REG_ENABLE for use during resume */ + sio_data->sio_select(sio_data, NCT6775_LD_HWM); + data->sio_reg_enable = sio_data->sio_inb(sio_data, SIO_REG_ENABLE); + + /* fan4 and fan5 share some pins with the GPIO and serial flash */ + if (data->kind == nct6775) { + int cr2c = sio_data->sio_inb(sio_data, 0x2c); + + fan3pin = cr2c & BIT(6); + pwm3pin = cr2c & BIT(7); + + /* On NCT6775, fan4 shares pins with the fdc interface */ + fan4pin = !(sio_data->sio_inb(sio_data, 0x2A) & 0x80); + } else if (data->kind == nct6776) { + bool gpok = sio_data->sio_inb(sio_data, 0x27) & 0x80; + const char *board_vendor, *board_name; + + board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); + board_name = dmi_get_system_info(DMI_BOARD_NAME); + + if (board_name && board_vendor && + !strcmp(board_vendor, "ASRock")) { + /* + * Auxiliary fan monitoring is not enabled on ASRock + * Z77 Pro4-M if booted in UEFI Ultra-FastBoot mode. + * Observed with BIOS version 2.00. + */ + if (!strcmp(board_name, "Z77 Pro4-M")) { + if ((data->sio_reg_enable & 0xe0) != 0xe0) { + data->sio_reg_enable |= 0xe0; + sio_data->sio_outb(sio_data, SIO_REG_ENABLE, + data->sio_reg_enable); + } + } + } + + if (data->sio_reg_enable & 0x80) + fan3pin = gpok; + else + fan3pin = !(sio_data->sio_inb(sio_data, 0x24) & 0x40); + + if (data->sio_reg_enable & 0x40) + fan4pin = gpok; + else + fan4pin = sio_data->sio_inb(sio_data, 0x1C) & 0x01; + + if (data->sio_reg_enable & 0x20) + fan5pin = gpok; + else + fan5pin = sio_data->sio_inb(sio_data, 0x1C) & 0x02; + + fan4min = fan4pin; + pwm3pin = fan3pin; + } else if (data->kind == nct6106) { + int cr24 = sio_data->sio_inb(sio_data, 0x24); + + fan3pin = !(cr24 & 0x80); + pwm3pin = cr24 & 0x08; + } else if (data->kind == nct6116) { + int cr1a = sio_data->sio_inb(sio_data, 0x1a); + int cr1b = sio_data->sio_inb(sio_data, 0x1b); + int cr24 = sio_data->sio_inb(sio_data, 0x24); + int cr2a = sio_data->sio_inb(sio_data, 0x2a); + int cr2b = sio_data->sio_inb(sio_data, 0x2b); + int cr2f = sio_data->sio_inb(sio_data, 0x2f); + + fan3pin = !(cr2b & 0x10); + fan4pin = (cr2b & 0x80) || // pin 1(2) + (!(cr2f & 0x10) && (cr1a & 0x04)); // pin 65(66) + fan5pin = (cr2b & 0x80) || // pin 126(127) + (!(cr1b & 0x03) && (cr2a & 0x02)); // pin 94(96) + + pwm3pin = fan3pin && (cr24 & 0x08); + pwm4pin = fan4pin; + pwm5pin = fan5pin; + } else { + /* + * NCT6779D, NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, + * NCT6797D, NCT6798D + */ + int cr1a = sio_data->sio_inb(sio_data, 0x1a); + int cr1b = sio_data->sio_inb(sio_data, 0x1b); + int cr1c = sio_data->sio_inb(sio_data, 0x1c); + int cr1d = sio_data->sio_inb(sio_data, 0x1d); + int cr2a = sio_data->sio_inb(sio_data, 0x2a); + int cr2b = sio_data->sio_inb(sio_data, 0x2b); + int cr2d = sio_data->sio_inb(sio_data, 0x2d); + int cr2f = sio_data->sio_inb(sio_data, 0x2f); + bool dsw_en = cr2f & BIT(3); + bool ddr4_en = cr2f & BIT(4); + int cre0; + int creb; + int cred; + + sio_data->sio_select(sio_data, NCT6775_LD_12); + cre0 = sio_data->sio_inb(sio_data, 0xe0); + creb = sio_data->sio_inb(sio_data, 0xeb); + cred = sio_data->sio_inb(sio_data, 0xed); + + fan3pin = !(cr1c & BIT(5)); + fan4pin = !(cr1c & BIT(6)); + fan5pin = !(cr1c & BIT(7)); + + pwm3pin = !(cr1c & BIT(0)); + pwm4pin = !(cr1c & BIT(1)); + pwm5pin = !(cr1c & BIT(2)); + + switch (data->kind) { + case nct6791: + fan6pin = cr2d & BIT(1); + pwm6pin = cr2d & BIT(0); + break; + case nct6792: + fan6pin = !dsw_en && (cr2d & BIT(1)); + pwm6pin = !dsw_en && (cr2d & BIT(0)); + break; + case nct6793: + fan5pin |= cr1b & BIT(5); + fan5pin |= creb & BIT(5); + + fan6pin = !dsw_en && (cr2d & BIT(1)); + fan6pin |= creb & BIT(3); + + pwm5pin |= cr2d & BIT(7); + pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0)); + + pwm6pin = !dsw_en && (cr2d & BIT(0)); + pwm6pin |= creb & BIT(2); + break; + case nct6795: + fan5pin |= cr1b & BIT(5); + fan5pin |= creb & BIT(5); + + fan6pin = (cr2a & BIT(4)) && + (!dsw_en || (cred & BIT(4))); + fan6pin |= creb & BIT(3); + + pwm5pin |= cr2d & BIT(7); + pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0)); + + pwm6pin = (cr2a & BIT(3)) && (cred & BIT(2)); + pwm6pin |= creb & BIT(2); + break; + case nct6796: + fan5pin |= cr1b & BIT(5); + fan5pin |= (cre0 & BIT(3)) && !(cr1b & BIT(0)); + fan5pin |= creb & BIT(5); + + fan6pin = (cr2a & BIT(4)) && + (!dsw_en || (cred & BIT(4))); + fan6pin |= creb & BIT(3); + + fan7pin = !(cr2b & BIT(2)); + + pwm5pin |= cr2d & BIT(7); + pwm5pin |= (cre0 & BIT(4)) && !(cr1b & BIT(0)); + pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0)); + + pwm6pin = (cr2a & BIT(3)) && (cred & BIT(2)); + pwm6pin |= creb & BIT(2); + + pwm7pin = !(cr1d & (BIT(2) | BIT(3))); + break; + case nct6797: + fan5pin |= !ddr4_en && (cr1b & BIT(5)); + fan5pin |= creb & BIT(5); + + fan6pin = cr2a & BIT(4); + fan6pin |= creb & BIT(3); + + fan7pin = cr1a & BIT(1); + + pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0)); + pwm5pin |= !ddr4_en && (cr2d & BIT(7)); + + pwm6pin = creb & BIT(2); + pwm6pin |= cred & BIT(2); + + pwm7pin = cr1d & BIT(4); + break; + case nct6798: + fan6pin = !(cr1b & BIT(0)) && (cre0 & BIT(3)); + fan6pin |= cr2a & BIT(4); + fan6pin |= creb & BIT(5); + + fan7pin = cr1b & BIT(5); + fan7pin |= !(cr2b & BIT(2)); + fan7pin |= creb & BIT(3); + + pwm6pin = !(cr1b & BIT(0)) && (cre0 & BIT(4)); + pwm6pin |= !(cred & BIT(2)) && (cr2a & BIT(3)); + pwm6pin |= (creb & BIT(4)) && !(cr2a & BIT(0)); + + pwm7pin = !(cr1d & (BIT(2) | BIT(3))); + pwm7pin |= cr2d & BIT(7); + pwm7pin |= creb & BIT(2); + break; + default: /* NCT6779D */ + break; + } + + fan4min = fan4pin; + } + + /* fan 1 and 2 (0x03) are always present */ + data->has_fan = 0x03 | (fan3pin << 2) | (fan4pin << 3) | + (fan5pin << 4) | (fan6pin << 5) | (fan7pin << 6); + data->has_fan_min = 0x03 | (fan3pin << 2) | (fan4min << 3) | + (fan5pin << 4) | (fan6pin << 5) | (fan7pin << 6); + data->has_pwm = 0x03 | (pwm3pin << 2) | (pwm4pin << 3) | + (pwm5pin << 4) | (pwm6pin << 5) | (pwm7pin << 6); +} + +static ssize_t +cpu0_vid_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct nct6775_data *data = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); +} + +static DEVICE_ATTR_RO(cpu0_vid); + +/* Case open detection */ + +static const u8 NCT6775_REG_CR_CASEOPEN_CLR[] = { 0xe6, 0xee }; +static const u8 NCT6775_CR_CASEOPEN_CLR_MASK[] = { 0x20, 0x01 }; + +static ssize_t +clear_caseopen(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct nct6775_data *data = dev_get_drvdata(dev); + struct nct6775_sio_data *sio_data = data->driver_data; + int nr = to_sensor_dev_attr(attr)->index - INTRUSION_ALARM_BASE; + unsigned long val; + u8 reg; + int ret; + + if (kstrtoul(buf, 10, &val) || val != 0) + return -EINVAL; + + mutex_lock(&data->update_lock); + + /* + * Use CR registers to clear caseopen status. + * The CR registers are the same for all chips, and not all chips + * support clearing the caseopen status through "regular" registers. + */ + ret = sio_data->sio_enter(sio_data); + if (ret) { + count = ret; + goto error; + } + + sio_data->sio_select(sio_data, NCT6775_LD_ACPI); + reg = sio_data->sio_inb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr]); + reg |= NCT6775_CR_CASEOPEN_CLR_MASK[nr]; + sio_data->sio_outb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg); + reg &= ~NCT6775_CR_CASEOPEN_CLR_MASK[nr]; + sio_data->sio_outb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg); + sio_data->sio_exit(sio_data); + + data->valid = false; /* Force cache refresh */ +error: + mutex_unlock(&data->update_lock); + return count; +} + +static SENSOR_DEVICE_ATTR(intrusion0_alarm, 0644, nct6775_show_alarm, + clear_caseopen, INTRUSION_ALARM_BASE); +static SENSOR_DEVICE_ATTR(intrusion1_alarm, 0644, nct6775_show_alarm, + clear_caseopen, INTRUSION_ALARM_BASE + 1); +static SENSOR_DEVICE_ATTR(intrusion0_beep, 0644, nct6775_show_beep, + nct6775_store_beep, INTRUSION_ALARM_BASE); +static SENSOR_DEVICE_ATTR(intrusion1_beep, 0644, nct6775_show_beep, + nct6775_store_beep, INTRUSION_ALARM_BASE + 1); +static SENSOR_DEVICE_ATTR(beep_enable, 0644, nct6775_show_beep, + nct6775_store_beep, BEEP_ENABLE_BASE); + +static umode_t nct6775_other_is_visible(struct kobject *kobj, + struct attribute *attr, int index) +{ + struct device *dev = kobj_to_dev(kobj); + struct nct6775_data *data = dev_get_drvdata(dev); + + if (index == 0 && !data->have_vid) + return 0; + + if (index == 1 || index == 2) { + if (data->ALARM_BITS[INTRUSION_ALARM_BASE + index - 1] < 0) + return 0; + } + + if (index == 3 || index == 4) { + if (data->BEEP_BITS[INTRUSION_ALARM_BASE + index - 3] < 0) + return 0; + } + + return nct6775_attr_mode(data, attr); +} + +/* + * nct6775_other_is_visible uses the index into the following array + * to determine if attributes should be created or not. + * Any change in order or content must be matched. + */ +static struct attribute *nct6775_attributes_other[] = { + &dev_attr_cpu0_vid.attr, /* 0 */ + &sensor_dev_attr_intrusion0_alarm.dev_attr.attr, /* 1 */ + &sensor_dev_attr_intrusion1_alarm.dev_attr.attr, /* 2 */ + &sensor_dev_attr_intrusion0_beep.dev_attr.attr, /* 3 */ + &sensor_dev_attr_intrusion1_beep.dev_attr.attr, /* 4 */ + &sensor_dev_attr_beep_enable.dev_attr.attr, /* 5 */ + + NULL +}; + +static const struct attribute_group nct6775_group_other = { + .attrs = nct6775_attributes_other, + .is_visible = nct6775_other_is_visible, +}; + +static int nct6775_platform_probe_init(struct nct6775_data *data) +{ + int err; + u8 cr2a; + struct nct6775_sio_data *sio_data = data->driver_data; + + err = sio_data->sio_enter(sio_data); + if (err) + return err; + + cr2a = sio_data->sio_inb(sio_data, 0x2a); + switch (data->kind) { + case nct6775: + data->have_vid = (cr2a & 0x40); + break; + case nct6776: + data->have_vid = (cr2a & 0x60) == 0x40; + break; + case nct6106: + case nct6116: + case nct6779: + case nct6791: + case nct6792: + case nct6793: + case nct6795: + case nct6796: + case nct6797: + case nct6798: + break; + } + + /* + * Read VID value + * We can get the VID input values directly at logical device D 0xe3. + */ + if (data->have_vid) { + sio_data->sio_select(sio_data, NCT6775_LD_VID); + data->vid = sio_data->sio_inb(sio_data, 0xe3); + data->vrm = vid_which_vrm(); + } + + if (fan_debounce) { + u8 tmp; + + sio_data->sio_select(sio_data, NCT6775_LD_HWM); + tmp = sio_data->sio_inb(sio_data, + NCT6775_REG_CR_FAN_DEBOUNCE); + switch (data->kind) { + case nct6106: + case nct6116: + tmp |= 0xe0; + break; + case nct6775: + tmp |= 0x1e; + break; + case nct6776: + case nct6779: + tmp |= 0x3e; + break; + case nct6791: + case nct6792: + case nct6793: + case nct6795: + case nct6796: + case nct6797: + case nct6798: + tmp |= 0x7e; + break; + } + sio_data->sio_outb(sio_data, NCT6775_REG_CR_FAN_DEBOUNCE, + tmp); + pr_info("Enabled fan debounce for chip %s\n", data->name); + } + + nct6775_check_fan_inputs(data, sio_data); + + sio_data->sio_exit(sio_data); + + return nct6775_add_attr_group(data, &nct6775_group_other); +} + +static const struct regmap_config nct6775_regmap_config = { + .reg_bits = 16, + .val_bits = 16, + .reg_read = nct6775_reg_read, + .reg_write = nct6775_reg_write, +}; + +static const struct regmap_config nct6775_wmi_regmap_config = { + .reg_bits = 16, + .val_bits = 16, + .reg_read = nct6775_wmi_reg_read, + .reg_write = nct6775_wmi_reg_write, +}; + +static int nct6775_platform_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct nct6775_sio_data *sio_data = dev_get_platdata(dev); + struct nct6775_data *data; + struct resource *res; + const struct regmap_config *regmapcfg; + + if (sio_data->access == access_direct) { + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!devm_request_region(&pdev->dev, res->start, IOREGION_LENGTH, DRVNAME)) + return -EBUSY; + } + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->kind = sio_data->kind; + data->sioreg = sio_data->sioreg; + + if (sio_data->access == access_direct) { + data->addr = res->start; + regmapcfg = &nct6775_regmap_config; + } else { + regmapcfg = &nct6775_wmi_regmap_config; + } + + platform_set_drvdata(pdev, data); + + data->driver_data = sio_data; + data->driver_init = nct6775_platform_probe_init; + + return nct6775_probe(&pdev->dev, data, regmapcfg); +} + +static struct platform_driver nct6775_driver = { + .driver = { + .name = DRVNAME, + .pm = &nct6775_dev_pm_ops, + }, + .probe = nct6775_platform_probe, +}; + +/* nct6775_find() looks for a '627 in the Super-I/O config space */ +static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data) +{ + u16 val; + int err; + int addr; + + sio_data->access = access_direct; + sio_data->sioreg = sioaddr; + + err = sio_data->sio_enter(sio_data); + if (err) + return err; + + val = (sio_data->sio_inb(sio_data, SIO_REG_DEVID) << 8) | + sio_data->sio_inb(sio_data, SIO_REG_DEVID + 1); + if (force_id && val != 0xffff) + val = force_id; + + switch (val & SIO_ID_MASK) { + case SIO_NCT6106_ID: + sio_data->kind = nct6106; + break; + case SIO_NCT6116_ID: + sio_data->kind = nct6116; + break; + case SIO_NCT6775_ID: + sio_data->kind = nct6775; + break; + case SIO_NCT6776_ID: + sio_data->kind = nct6776; + break; + case SIO_NCT6779_ID: + sio_data->kind = nct6779; + break; + case SIO_NCT6791_ID: + sio_data->kind = nct6791; + break; + case SIO_NCT6792_ID: + sio_data->kind = nct6792; + break; + case SIO_NCT6793_ID: + sio_data->kind = nct6793; + break; + case SIO_NCT6795_ID: + sio_data->kind = nct6795; + break; + case SIO_NCT6796_ID: + sio_data->kind = nct6796; + break; + case SIO_NCT6797_ID: + sio_data->kind = nct6797; + break; + case SIO_NCT6798_ID: + sio_data->kind = nct6798; + break; + default: + if (val != 0xffff) + pr_debug("unsupported chip ID: 0x%04x\n", val); + sio_data->sio_exit(sio_data); + return -ENODEV; + } + + /* We have a known chip, find the HWM I/O address */ + sio_data->sio_select(sio_data, NCT6775_LD_HWM); + val = (sio_data->sio_inb(sio_data, SIO_REG_ADDR) << 8) + | sio_data->sio_inb(sio_data, SIO_REG_ADDR + 1); + addr = val & IOREGION_ALIGNMENT; + if (addr == 0) { + pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n"); + sio_data->sio_exit(sio_data); + return -ENODEV; + } + + /* Activate logical device if needed */ + val = sio_data->sio_inb(sio_data, SIO_REG_ENABLE); + if (!(val & 0x01)) { + pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n"); + sio_data->sio_outb(sio_data, SIO_REG_ENABLE, val | 0x01); + } + + if (sio_data->kind == nct6791 || sio_data->kind == nct6792 || + sio_data->kind == nct6793 || sio_data->kind == nct6795 || + sio_data->kind == nct6796 || sio_data->kind == nct6797 || + sio_data->kind == nct6798) + nct6791_enable_io_mapping(sio_data); + + sio_data->sio_exit(sio_data); + pr_info("Found %s or compatible chip at %#x:%#x\n", + nct6775_sio_names[sio_data->kind], sioaddr, addr); + + return addr; +} + +/* + * when Super-I/O functions move to a separate file, the Super-I/O + * bus will manage the lifetime of the device and this module will only keep + * track of the nct6775 driver. But since we use platform_device_alloc(), we + * must keep track of the device + */ +static struct platform_device *pdev[2]; + +static const char * const asus_wmi_boards[] = { + "ProArt X570-CREATOR WIFI", + "Pro B550M-C", + "Pro WS X570-ACE", + "PRIME B360-PLUS", + "PRIME B460-PLUS", + "PRIME B550-PLUS", + "PRIME B550M-A", + "PRIME B550M-A (WI-FI)", + "PRIME X570-P", + "PRIME X570-PRO", + "ROG CROSSHAIR VIII DARK HERO", + "ROG CROSSHAIR VIII FORMULA", + "ROG CROSSHAIR VIII HERO", + "ROG CROSSHAIR VIII IMPACT", + "ROG STRIX B550-A GAMING", + "ROG STRIX B550-E GAMING", + "ROG STRIX B550-F GAMING", + "ROG STRIX B550-F GAMING (WI-FI)", + "ROG STRIX B550-F GAMING WIFI II", + "ROG STRIX B550-I GAMING", + "ROG STRIX B550-XE GAMING (WI-FI)", + "ROG STRIX X570-E GAMING", + "ROG STRIX X570-F GAMING", + "ROG STRIX X570-I GAMING", + "ROG STRIX Z390-E GAMING", + "ROG STRIX Z390-F GAMING", + "ROG STRIX Z390-H GAMING", + "ROG STRIX Z390-I GAMING", + "ROG STRIX Z490-A GAMING", + "ROG STRIX Z490-E GAMING", + "ROG STRIX Z490-F GAMING", + "ROG STRIX Z490-G GAMING", + "ROG STRIX Z490-G GAMING (WI-FI)", + "ROG STRIX Z490-H GAMING", + "ROG STRIX Z490-I GAMING", + "TUF GAMING B550M-PLUS", + "TUF GAMING B550M-PLUS (WI-FI)", + "TUF GAMING B550-PLUS", + "TUF GAMING B550-PRO", + "TUF GAMING X570-PLUS", + "TUF GAMING X570-PLUS (WI-FI)", + "TUF GAMING X570-PRO (WI-FI)", + "TUF GAMING Z490-PLUS", + "TUF GAMING Z490-PLUS (WI-FI)", +}; + +static int __init sensors_nct6775_platform_init(void) +{ + int i, err; + bool found = false; + int address; + struct resource res; + struct nct6775_sio_data sio_data; + int sioaddr[2] = { 0x2e, 0x4e }; + enum sensor_access access = access_direct; + const char *board_vendor, *board_name; + u8 tmp; + + err = platform_driver_register(&nct6775_driver); + if (err) + return err; + + board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); + board_name = dmi_get_system_info(DMI_BOARD_NAME); + + if (board_name && board_vendor && + !strcmp(board_vendor, "ASUSTeK COMPUTER INC.")) { + err = match_string(asus_wmi_boards, ARRAY_SIZE(asus_wmi_boards), + board_name); + if (err >= 0) { + /* if reading chip id via WMI succeeds, use WMI */ + if (!nct6775_asuswmi_read(0, NCT6775_PORT_CHIPID, &tmp) && tmp) { + pr_info("Using Asus WMI to access %#x chip.\n", tmp); + access = access_asuswmi; + } else { + pr_err("Can't read ChipID by Asus WMI.\n"); + } + } + } + + /* + * initialize sio_data->kind and sio_data->sioreg. + * + * when Super-I/O functions move to a separate file, the Super-I/O + * driver will probe 0x2e and 0x4e and auto-detect the presence of a + * nct6775 hardware monitor, and call probe() + */ + for (i = 0; i < ARRAY_SIZE(pdev); i++) { + sio_data.sio_outb = superio_outb; + sio_data.sio_inb = superio_inb; + sio_data.sio_select = superio_select; + sio_data.sio_enter = superio_enter; + sio_data.sio_exit = superio_exit; + + address = nct6775_find(sioaddr[i], &sio_data); + if (address <= 0) + continue; + + found = true; + + sio_data.access = access; + + if (access == access_asuswmi) { + sio_data.sio_outb = superio_wmi_outb; + sio_data.sio_inb = superio_wmi_inb; + sio_data.sio_select = superio_wmi_select; + sio_data.sio_enter = superio_wmi_enter; + sio_data.sio_exit = superio_wmi_exit; + } + + pdev[i] = platform_device_alloc(DRVNAME, address); + if (!pdev[i]) { + err = -ENOMEM; + goto exit_device_unregister; + } + + err = platform_device_add_data(pdev[i], &sio_data, + sizeof(struct nct6775_sio_data)); + if (err) + goto exit_device_put; + + if (sio_data.access == access_direct) { + memset(&res, 0, sizeof(res)); + res.name = DRVNAME; + res.start = address + IOREGION_OFFSET; + res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1; + res.flags = IORESOURCE_IO; + + err = acpi_check_resource_conflict(&res); + if (err) { + platform_device_put(pdev[i]); + pdev[i] = NULL; + continue; + } + + err = platform_device_add_resources(pdev[i], &res, 1); + if (err) + goto exit_device_put; + } + + /* platform_device_add calls probe() */ + err = platform_device_add(pdev[i]); + if (err) + goto exit_device_put; + } + if (!found) { + err = -ENODEV; + goto exit_unregister; + } + + return 0; + +exit_device_put: + platform_device_put(pdev[i]); +exit_device_unregister: + while (--i >= 0) { + if (pdev[i]) + platform_device_unregister(pdev[i]); + } +exit_unregister: + platform_driver_unregister(&nct6775_driver); + return err; +} + +static void __exit sensors_nct6775_platform_exit(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(pdev); i++) { + if (pdev[i]) + platform_device_unregister(pdev[i]); + } + platform_driver_unregister(&nct6775_driver); +} + +MODULE_AUTHOR("Guenter Roeck "); +MODULE_DESCRIPTION("Platform driver for NCT6775F and compatible chips"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(HWMON_NCT6775); + +module_init(sensors_nct6775_platform_init); +module_exit(sensors_nct6775_platform_exit); diff --git a/drivers/hwmon/nct6775.h b/drivers/hwmon/nct6775.h new file mode 100644 index 000000000000..93f708148e65 --- /dev/null +++ b/drivers/hwmon/nct6775.h @@ -0,0 +1,252 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef __HWMON_NCT6775_H__ +#define __HWMON_NCT6775_H__ + +#include + +enum kinds { nct6106, nct6116, nct6775, nct6776, nct6779, nct6791, nct6792, + nct6793, nct6795, nct6796, nct6797, nct6798 }; +enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 }; + +#define NUM_TEMP 10 /* Max number of temp attribute sets w/ limits*/ +#define NUM_TEMP_FIXED 6 /* Max number of fixed temp attribute sets */ +#define NUM_TSI_TEMP 8 /* Max number of TSI temp register pairs */ + +#define NUM_REG_ALARM 7 /* Max number of alarm registers */ +#define NUM_REG_BEEP 5 /* Max number of beep registers */ + +#define NUM_FAN 7 + +struct nct6775_data { + int addr; /* IO base of hw monitor block */ + int sioreg; /* SIO register address */ + enum kinds kind; + const char *name; + + const struct attribute_group *groups[7]; + u8 num_groups; + + u16 reg_temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst, + * 3=temp_crit, 4=temp_lcrit + */ + u8 temp_src[NUM_TEMP]; + u16 reg_temp_config[NUM_TEMP]; + const char * const *temp_label; + u32 temp_mask; + u32 virt_temp_mask; + + u16 REG_CONFIG; + u16 REG_VBAT; + u16 REG_DIODE; + u8 DIODE_MASK; + + const s8 *ALARM_BITS; + const s8 *BEEP_BITS; + + const u16 *REG_VIN; + const u16 *REG_IN_MINMAX[2]; + + const u16 *REG_TARGET; + const u16 *REG_FAN; + const u16 *REG_FAN_MODE; + const u16 *REG_FAN_MIN; + const u16 *REG_FAN_PULSES; + const u16 *FAN_PULSE_SHIFT; + const u16 *REG_FAN_TIME[3]; + + const u16 *REG_TOLERANCE_H; + + const u8 *REG_PWM_MODE; + const u8 *PWM_MODE_MASK; + + const u16 *REG_PWM[7]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor, + * [3]=pwm_max, [4]=pwm_step, + * [5]=weight_duty_step, [6]=weight_duty_base + */ + const u16 *REG_PWM_READ; + + const u16 *REG_CRITICAL_PWM_ENABLE; + u8 CRITICAL_PWM_ENABLE_MASK; + const u16 *REG_CRITICAL_PWM; + + const u16 *REG_AUTO_TEMP; + const u16 *REG_AUTO_PWM; + + const u16 *REG_CRITICAL_TEMP; + const u16 *REG_CRITICAL_TEMP_TOLERANCE; + + const u16 *REG_TEMP_SOURCE; /* temp register sources */ + const u16 *REG_TEMP_SEL; + const u16 *REG_WEIGHT_TEMP_SEL; + const u16 *REG_WEIGHT_TEMP[3]; /* 0=base, 1=tolerance, 2=step */ + + const u16 *REG_TEMP_OFFSET; + + const u16 *REG_ALARM; + const u16 *REG_BEEP; + + const u16 *REG_TSI_TEMP; + + unsigned int (*fan_from_reg)(u16 reg, unsigned int divreg); + unsigned int (*fan_from_reg_min)(u16 reg, unsigned int divreg); + + struct mutex update_lock; + bool valid; /* true if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + /* Register values */ + u8 bank; /* current register bank */ + u8 in_num; /* number of in inputs we have */ + u8 in[15][3]; /* [0]=in, [1]=in_max, [2]=in_min */ + unsigned int rpm[NUM_FAN]; + u16 fan_min[NUM_FAN]; + u8 fan_pulses[NUM_FAN]; + u8 fan_div[NUM_FAN]; + u8 has_pwm; + u8 has_fan; /* some fan inputs can be disabled */ + u8 has_fan_min; /* some fans don't have min register */ + bool has_fan_div; + + u8 num_temp_alarms; /* 2, 3, or 6 */ + u8 num_temp_beeps; /* 2, 3, or 6 */ + u8 temp_fixed_num; /* 3 or 6 */ + u8 temp_type[NUM_TEMP_FIXED]; + s8 temp_offset[NUM_TEMP_FIXED]; + s16 temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst, + * 3=temp_crit, 4=temp_lcrit + */ + s16 tsi_temp[NUM_TSI_TEMP]; + u64 alarms; + u64 beeps; + + u8 pwm_num; /* number of pwm */ + u8 pwm_mode[NUM_FAN]; /* 0->DC variable voltage, + * 1->PWM variable duty cycle + */ + enum pwm_enable pwm_enable[NUM_FAN]; + /* 0->off + * 1->manual + * 2->thermal cruise mode (also called SmartFan I) + * 3->fan speed cruise mode + * 4->SmartFan III + * 5->enhanced variable thermal cruise (SmartFan IV) + */ + u8 pwm[7][NUM_FAN]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor, + * [3]=pwm_max, [4]=pwm_step, + * [5]=weight_duty_step, [6]=weight_duty_base + */ + + u8 target_temp[NUM_FAN]; + u8 target_temp_mask; + u32 target_speed[NUM_FAN]; + u32 target_speed_tolerance[NUM_FAN]; + u8 speed_tolerance_limit; + + u8 temp_tolerance[2][NUM_FAN]; + u8 tolerance_mask; + + u8 fan_time[3][NUM_FAN]; /* 0 = stop_time, 1 = step_up, 2 = step_down */ + + /* Automatic fan speed control registers */ + int auto_pwm_num; + u8 auto_pwm[NUM_FAN][7]; + u8 auto_temp[NUM_FAN][7]; + u8 pwm_temp_sel[NUM_FAN]; + u8 pwm_weight_temp_sel[NUM_FAN]; + u8 weight_temp[3][NUM_FAN]; /* 0->temp_step, 1->temp_step_tol, + * 2->temp_base + */ + + u8 vid; + u8 vrm; + + bool have_vid; + + u16 have_temp; + u16 have_temp_fixed; + u16 have_tsi_temp; + u16 have_in; + + /* Remember extra register values over suspend/resume */ + u8 vbat; + u8 fandiv1; + u8 fandiv2; + u8 sio_reg_enable; + + struct regmap *regmap; + bool read_only; + + /* driver-specific (platform, i2c) initialization hook and data */ + int (*driver_init)(struct nct6775_data *data); + void *driver_data; +}; + +static inline int nct6775_read_value(struct nct6775_data *data, u16 reg, u16 *value) +{ + unsigned int tmp; + int ret = regmap_read(data->regmap, reg, &tmp); + + if (!ret) + *value = tmp; + return ret; +} + +static inline int nct6775_write_value(struct nct6775_data *data, u16 reg, u16 value) +{ + return regmap_write(data->regmap, reg, value); +} + +bool nct6775_reg_is_word_sized(struct nct6775_data *data, u16 reg); +int nct6775_probe(struct device *dev, struct nct6775_data *data, + const struct regmap_config *regmapcfg); + +ssize_t nct6775_show_alarm(struct device *dev, struct device_attribute *attr, char *buf); +ssize_t nct6775_show_beep(struct device *dev, struct device_attribute *attr, char *buf); +ssize_t nct6775_store_beep(struct device *dev, struct device_attribute *attr, const char *buf, + size_t count); + +static inline int nct6775_write_temp(struct nct6775_data *data, u16 reg, u16 value) +{ + if (!nct6775_reg_is_word_sized(data, reg)) + value >>= 8; + return nct6775_write_value(data, reg, value); +} + +static inline umode_t nct6775_attr_mode(struct nct6775_data *data, struct attribute *attr) +{ + return data->read_only ? (attr->mode & ~0222) : attr->mode; +} + +static inline int +nct6775_add_attr_group(struct nct6775_data *data, const struct attribute_group *group) +{ + /* Need to leave a NULL terminator at the end of data->groups */ + if (data->num_groups == ARRAY_SIZE(data->groups) - 1) + return -ENOBUFS; + + data->groups[data->num_groups++] = group; + return 0; +} + +#define NCT6775_REG_BANK 0x4E +#define NCT6775_REG_CONFIG 0x40 + +#define NCT6775_REG_FANDIV1 0x506 +#define NCT6775_REG_FANDIV2 0x507 + +#define NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE 0x28 + +#define FAN_ALARM_BASE 16 +#define TEMP_ALARM_BASE 24 +#define INTRUSION_ALARM_BASE 30 +#define BEEP_ENABLE_BASE 15 + +/* + * Not currently used: + * REG_MAN_ID has the value 0x5ca3 for all supported chips. + * REG_CHIP_ID == 0x88/0xa1/0xc1 depending on chip model. + * REG_MAN_ID is at port 0x4f + * REG_CHIP_ID is at port 0x58 + */ + +#endif /* __HWMON_NCT6775_H__ */ -- 2.36.0