Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S970072AbXEHXdo (ORCPT ); Tue, 8 May 2007 19:33:44 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S967977AbXEHXde (ORCPT ); Tue, 8 May 2007 19:33:34 -0400 Received: from simmts7.bellnexxia.net ([206.47.199.165]:44924 "EHLO simmts7-srv.bellnexxia.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S967944AbXEHXdc (ORCPT ); Tue, 8 May 2007 19:33:32 -0400 Message-ID: <464108CC.3060604@gmail.com> Date: Tue, 08 May 2007 20:33:32 -0300 From: Kevin Winchester User-Agent: Thunderbird 2.0.0.0 (X11/20070326) MIME-Version: 1.0 To: Christoph Lameter CC: Andrew Morton , linux-kernel@vger.kernel.org Subject: Re: 2.6.21-mm1 and now 2.6.21-git: SLUB Crashes on boot References: <20070505014955.8f3990b5.akpm@linux-foundation.org> <4640FE35.2070605@gmail.com> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 28017 Lines: 538 Christoph Lameter wrote: > On Tue, 8 May 2007, Kevin Winchester wrote: > > >> x86_64 UP Athlon64 I get a crash on boot using SLUB. Switching to SLAB makes >> it go away. I don't have a serial console, so the best I have is a digital >> photo of as many lines as my VGA console was able to get (60 or so). Is there >> a better way to capture the oops output so that the full trace canbe seen? >> >> http://picasaweb.google.com/kjwinchester/Linux/photo#5061982383505227842 >> > > It fails to create a slab. There should be some of message above what I > can see that would indicate what went wrong. > > Please try to reboot and specify "slub_debug" as a kernel parameter. If it > boots then send us the kernel log output. Must have something to do with > how the scsi slab is created in scsi_setup_command_freelist. > > Here's the dmesg of the slub_debug run, I'll try the patch next: [ 0.000000] Linux version 2.6.21-mm1 (kevin@kevin) (gcc version 4.1.2 (Gentoo 4.1.2)) #2 PREEMPT Tue May 8 20:13:55 ADT 2007 [ 0.000000] Command line: root=/dev/sda3 slub_debug [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fef0000 (usable) [ 0.000000] BIOS-e820: 000000001fef0000 - 000000001fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001fef3000 - 000000001ff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 130800) 1 entries of 256 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000F77D0, 0014 (r0 VIAK8T) [ 0.000000] ACPI: RSDT 1FEF3040, 0034 (r1 VIAK8T AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 1FEF30C0, 0074 (r1 VIAK8T AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 1FEF3180, 4F8A (r1 VIAK8T AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 1FEF0000, 0040 [ 0.000000] ACPI: BOOT 1FEF8180, 0028 (r1 VIAK8T AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: SSDT 1FEF82C0, 00B5 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: APIC 1FEF8200, 0068 (r1 VIAK8T AWRDACPI 42302E31 AWRD 0) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 130800) 1 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 130800 [ 0.000000] On node 0 totalpages: 130703 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1380 pages reserved [ 0.000000] DMA zone: 2563 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1732 pages used for memmap [ 0.000000] DMA32 zone: 124972 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1ff00000:ded00000) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 127535 [ 0.000000] Kernel command line: root=/dev/sda3 slub_debug [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes) [ 0.000000] time.c: Detected 1838.876 MHz processor. [ 0.002000] Console: colour VGA+ 80x25 [ 0.003000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.004000] Checking aperture... [ 0.004000] CPU 0: aperture @ e0000000 size 128 MB [ 0.009000] Memory: 508904k/523200k available (3277k kernel code, 13572k reserved, 1276k data, 192k init) [ 0.009000] SLUB: Genslabs=18, HWalign=64, Order=0-4, MinObjects=16, Processors=1, Nodes=1 [ 0.070000] Calibrating delay using timer specific routine.. 3680.22 BogoMIPS (lpj=1840114) [ 0.070000] Mount-cache hash table entries: 256 [ 0.070000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.070000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.070000] CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00 [ 0.070000] ACPI: Core revision 20070126 [ 0.096000] Using local APIC timer interrupts. [ 0.096000] result 12769979 [ 0.096000] Detected 12.769 MHz APIC timer. [ 0.097068] NET: Registered protocol family 16 [ 0.097396] ACPI: bus type pci registered [ 0.097473] PCI: Using configuration type 1 [ 0.127304] ACPI: Interpreter enabled [ 0.127378] ACPI: (supports S0 S3 S4 S5) [ 0.127761] ACPI: Using IOAPIC for interrupt routing [ 0.150607] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.151910] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.355844] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5 [ 0.356922] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) [ 0.357985] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 6 7 10 11 12) [ 0.358904] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.359872] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.360824] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.361875] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 *10 11 12) [ 0.362722] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.363880] ACPI: PCI Interrupt Link [ALKA] (IRQs *20) [ 0.364681] ACPI: PCI Interrupt Link [ALKB] (IRQs *21) [ 0.365481] ACPI: PCI Interrupt Link [ALKC] (IRQs *22) [ 0.366441] ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled. [ 0.366843] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.366936] pnp: PnP ACPI init [ 0.367021] ACPI: bus type pnp registered [ 0.376845] pnp: PnP ACPI: found 8 devices [ 0.376916] ACPI: ACPI bus type pnp unregistered [ 0.377352] SCSI subsystem initialized [ 0.377465] libata version 2.20 loaded. [ 0.377631] usbcore: registered new interface driver usbfs [ 0.377814] usbcore: registered new interface driver hub [ 0.378010] usbcore: registered new device driver usb [ 0.378174] PCI: Using ACPI for IRQ routing [ 0.378247] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.378358] PCI: Cannot allocate resource region 0 of device 0000:00:00.0 [ 0.378642] agpgart: Detected AGP bridge 0 [ 0.382360] agpgart: AGP aperture is 128M @ 0xe0000000 [ 0.382603] pnp: 00:00: iomem range 0xcc000-0xcffff has been reserved [ 0.382680] pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 0.382757] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 0.382834] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.382924] pnp: 00:02: ioport range 0x4000-0x407f has been reserved [ 0.383000] pnp: 00:02: ioport range 0x5000-0x500f has been reserved [ 0.383332] Time: tsc clocksource has been installed. [ 0.384295] PCI: Bridge: 0000:00:01.0 [ 0.384368] IO window: c000-cfff [ 0.384440] MEM window: f8000000-f80fffff [ 0.384513] PREFETCH window: e8000000-f7ffffff [ 0.384595] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.384613] NET: Registered protocol family 2 [ 0.393352] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.393504] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 0.393732] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.393881] TCP: Hash tables configured (established 16384 bind 16384) [ 0.393955] TCP reno registered [ 0.396803] Simple Boot Flag at 0x37 set to 0x80 [ 0.414156] NTFS driver 2.1.28 [Flags: R/O]. [ 0.415118] io scheduler noop registered [ 0.415589] io scheduler cfq registered (default) [ 0.415738] Boot video device is 0000:01:00.0 [ 0.415922] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.416187] radeonfb: Found Intel x86 BIOS ROM Image [ 0.416260] radeonfb: Retrieved PLL infos from BIOS [ 0.416336] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=200.00 Mhz, System=166.00 MHz [ 0.416439] radeonfb: PLL min 20000 max 40000 [ 0.492812] i2c-adapter i2c-1: unable to read EDID block. [ 0.611591] i2c-adapter i2c-1: unable to read EDID block. [ 0.730382] i2c-adapter i2c-1: unable to read EDID block. [ 0.849225] i2c-adapter i2c-3: unable to read EDID block. [ 0.968016] i2c-adapter i2c-3: unable to read EDID block. [ 1.086804] i2c-adapter i2c-3: unable to read EDID block. [ 1.339657] radeonfb: Monitor 1 type CRT found [ 1.339728] radeonfb: EDID probed [ 1.339797] radeonfb: Monitor 2 type no found [ 1.340307] radeonfb (0000:01:00.0): ATI Radeon Yd [ 1.340776] input: Power Button (FF) as /devices/acpi_system:00/button_power:00/input/input0 [ 1.340883] ACPI: Power Button (FF) [PWRF] [ 1.341151] input: Power Button (CM) as /devices/acpi_system:00/device:00/PNP0C0C:00/input/input1 [ 1.341256] ACPI: Power Button (CM) [PWRB] [ 1.351006] Real Time Clock Driver v1.12ac [ 1.351206] Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0) [ 1.351310] Linux agpgart interface v0.102 (c) Dave Jones [ 1.351528] [drm] Initialized drm 1.1.0 20060810 [ 1.351836] [drm] Initialized radeon 1.25.0 20060524 on minor 0 [ 1.351915] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 1.352019] Hangcheck: Using get_cycles(). [ 1.352090] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 1.353376] loop: module loaded [ 1.353621] via-rhine: Broken BIOS detected, avoid_D3 enabled. [ 1.353925] VIA Networking Velocity Family Gigabit Ethernet Adapter Driver Ver. 1.14 [ 1.354027] Copyright (c) 2002, 2003 VIA Networking Technologies, Inc. [ 1.354100] Copyright (c) 2004 Red Hat Inc. [ 1.354188] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 1.355212] eth0: VIA Networking Velocity Family Gigabit Ethernet Adapter [ 1.355288] eth0: Ethernet Address: 00:50:8D:D1:28:BB [ 1.365842] PPP generic driver version 2.4.2 [ 1.366088] PPP MPPE Compression module registered [ 1.366168] *** SLUB kmalloc-256: Poison check failed@0xffff810001bdecd0 slab 0xffff810001061890 [ 1.366273] offset=3280 flags=0x40000000000040c2 inuse=10 freelist=0xffff810001bdecd0 [ 1.366376] Bytes b4 0xffff810001bdecc0: 6a 71 fb ff 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a jq??....ZZZZZZZZ [ 1.367129] Object 0xffff810001bdecd0: 80 b7 b1 01 00 81 ff ff 6b 6b 6b 6b 6b 6b 6b 6b .??...??kkkkkkkk [ 1.367881] Object 0xffff810001bdece0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [ 1.368632] Object 0xffff810001bdecf0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [ 1.369384] Object 0xffff810001bded00: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [ 1.370135] Object 0xffff810001bded10: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [ 1.371376] Object 0xffff810001bded20: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [ 1.372128] Object 0xffff810001bded30: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [ 1.372879] Object 0xffff810001bded40: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [ 1.373631] Redzone 0xffff810001bdedd0: bb bb bb bb bb bb bb bb ???????? [ 1.374382] FreePointer 0xffff810001bdedd8 -> 0xffff810001bdee18 [ 1.374455] Last alloc: cryptomgr_notify+0x28/0x190 jiffies_ago=0 cpu=0 pid=1 [ 1.374611] Last free : cryptomgr_probe+0x85/0xb0 jiffies_ago=0 cpu=0 pid=405 [ 1.374764] Filler 0xffff810001bdee10: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ [ 1.375514] [ 1.375514] Call Trace: [ 1.375653] [] object_err+0x113/0x1b0 [ 1.375728] [] check_object+0x105/0x2d0 [ 1.375802] [] slab_alloc+0x484/0x560 [ 1.375878] [] kobject_uevent_env+0xd1/0x540 [ 1.375954] [] kmem_cache_zalloc+0x22/0x50 [ 1.376029] [] kobject_uevent_env+0xd1/0x540 [ 1.376105] [] sysfs_create_dir+0x2d/0x80 [ 1.376179] [] kobject_get+0x1a/0x30 [ 1.376253] [] kobject_shadow_add+0xd4/0x220 [ 1.376328] [] kobject_uevent+0xb/0x10 [ 1.376403] [] kobject_register+0x4e/0x50 [ 1.376479] [] bus_add_driver+0x88/0x1d0 [ 1.376554] [] driver_register+0x4a/0x80 [ 1.376630] [] __pci_register_driver+0x5e/0xb0 [ 1.376706] [] tulip_init+0x31/0x40 [ 1.376783] [] kernel_init+0xc4/0x2a0 [ 1.376857] [] __switch_to+0x2a/0x2d0 [ 1.376932] [] child_rip+0xa/0x12 [ 1.377006] [] kernel_init+0x0/0x2a0 [ 1.377080] [] child_rip+0x0/0x12 [ 1.377151] [ 1.377221] @@@ SLUB kmalloc-256: Restoring Poison (0x6b) from 0xffff810001bdecd0-0xffff810001bdedce [ 1.377326] @@@ SLUB kmalloc-256: Restoring Poison (0xa5) from 0xffff810001bdedcf-0xffff810001bdedcf [ 1.377430] @@@ SLUB: kmalloc-256 slab 0xffff810001061890. Marking all objects used. [ 1.377995] pata_via 0000:00:0f.1: version 0.3.1 [ 1.378810] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 1.378886] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 1.379581] scsi0 : pata_via [ 1.379826] scsi1 : pata_via [ 1.380030] ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001e300 irq 14 [ 1.380136] ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001e308 irq 15 [ 1.834983] ata1.00: ATAPI, max UDMA/33 [ 1.835057] ata1.01: ATAPI, max UDMA/33 [ 1.991702] ata1.00: configured for UDMA/33 [ 2.148426] ata1.01: configured for UDMA/33 [ 2.302264] ata2.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488 [ 2.302366] ata2.00: ATA-6: WDC WD800JB-00JJA0, 05.01C05, max UDMA/100 [ 2.302441] ata2.00: 156301488 sectors, multi 16: LBA [ 2.305250] ata2.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488 [ 2.305354] ata2.00: configured for UDMA/100 [ 2.306110] scsi 0:0:0:0: CD-ROM COMPAQ DVD-ROM DRD8120B 1.10 PQ: 0 ANSI: 5 [ 2.309751] sr0: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray [ 2.309827] Uniform CD-ROM driver Revision: 3.20 [ 2.310066] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.310292] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.310663] scsi 0:0:1:0: CD-ROM HL-DT-ST CD-RW GCE-8525B 1.03 PQ: 0 ANSI: 5 [ 2.314520] sr1: scsi3-mmc drive: 40x/52x writer cd/rw xa/form2 cdda tray [ 2.314762] sr 0:0:1:0: Attached scsi CD-ROM sr1 [ 2.314991] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 2.315204] scsi 1:0:0:0: Direct-Access ATA WDC WD800JB-00JJ 05.0 PQ: 0 ANSI: 5 [ 2.315584] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 2.315679] sd 1:0:0:0: [sda] Write Protect is off [ 2.315751] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.315791] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.315983] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 2.316077] sd 1:0:0:0: [sda] Write Protect is off [ 2.316149] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.316187] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.316322] sda: sda1 sda2 sda3 [ 2.324886] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.325179] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 2.325428] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 [ 2.325589] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 2.325805] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 2.325988] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf8120000 [ 2.326065] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.326260] usb usb1: new device found, idVendor=0000, idProduct=0000 [ 2.326334] usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.326409] usb usb1: Product: EHCI Host Controller [ 2.326480] usb usb1: Manufacturer: Linux 2.6.21-mm1 ehci_hcd [ 2.326553] usb usb1: SerialNumber: 0000:00:10.4 [ 2.327044] usb usb1: configuration #1 chosen from 1 choice [ 2.327262] hub 1-0:1.0: USB hub found [ 2.327345] hub 1-0:1.0: 8 ports detected [ 2.427957] USB Universal Host Controller Interface driver v3.0 [ 2.428316] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 2.428466] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 2.428654] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 2.428783] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e400 [ 2.428977] usb usb2: new device found, idVendor=0000, idProduct=0000 [ 2.429051] usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.429125] usb usb2: Product: UHCI Host Controller [ 2.429197] usb usb2: Manufacturer: Linux 2.6.21-mm1 uhci_hcd [ 2.429269] usb usb2: SerialNumber: 0000:00:10.0 [ 2.429650] usb usb2: configuration #1 chosen from 1 choice [ 2.429858] hub 2-0:1.0: USB hub found [ 2.429939] hub 2-0:1.0: 2 ports detected [ 2.530746] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21 [ 2.530894] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 2.531081] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 2.531205] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e500 [ 2.531387] usb usb3: new device found, idVendor=0000, idProduct=0000 [ 2.531461] usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.531535] usb usb3: Product: UHCI Host Controller [ 2.531641] usb usb3: Manufacturer: Linux 2.6.21-mm1 uhci_hcd [ 2.531713] usb usb3: SerialNumber: 0000:00:10.1 [ 2.532094] usb usb3: configuration #1 chosen from 1 choice [ 2.532308] hub 3-0:1.0: USB hub found [ 2.532390] hub 3-0:1.0: 2 ports detected [ 2.632574] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21 [ 2.632721] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 2.632915] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 2.633039] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e600 [ 2.633233] usb usb4: new device found, idVendor=0000, idProduct=0000 [ 2.633307] usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.633381] usb usb4: Product: UHCI Host Controller [ 2.633455] usb usb4: Manufacturer: Linux 2.6.21-mm1 uhci_hcd [ 2.633528] usb usb4: SerialNumber: 0000:00:10.2 [ 2.633957] usb usb4: configuration #1 chosen from 1 choice [ 2.634171] hub 4-0:1.0: USB hub found [ 2.634251] hub 4-0:1.0: 2 ports detected [ 2.734386] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21 [ 2.734533] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 2.734736] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 2.734861] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e700 [ 2.735046] usb usb5: new device found, idVendor=0000, idProduct=0000 [ 2.735120] usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.735195] usb usb5: Product: UHCI Host Controller [ 2.735269] usb usb5: Manufacturer: Linux 2.6.21-mm1 uhci_hcd [ 2.735341] usb usb5: SerialNumber: 0000:00:10.3 [ 2.735720] usb usb5: configuration #1 chosen from 1 choice [ 2.735939] hub 5-0:1.0: USB hub found [ 2.736019] hub 5-0:1.0: 2 ports detected [ 2.836216] Initializing USB Mass Storage driver... [ 2.942850] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 3.112715] usb 2-1: new device found, idVendor=045e, idProduct=00b0 [ 3.112789] usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.112864] usb 2-1: Product: Microsoft? Digital Media Pro Keyboard [ 3.112937] usb 2-1: Manufacturer: Microsoft [ 3.113318] usb 2-1: configuration #1 chosen from 1 choice [ 3.321189] usb 2-2: new low speed USB device using uhci_hcd and address 3 [ 3.481073] usb 2-2: new device found, idVendor=046d, idProduct=c00c [ 3.481146] usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.481221] usb 2-2: Product: USB Mouse [ 3.481291] usb 2-2: Manufacturer: Logitech [ 3.481664] usb 2-2: configuration #1 chosen from 1 choice [ 4.106830] usbcore: registered new interface driver usb-storage [ 4.106904] USB Mass Storage support registered. [ 4.107391] PNP: No PS/2 controller found. Probing ports directly. [ 4.109683] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.109892] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.110210] mice: PS/2 mouse device common for all mice [ 4.110740] i2c /dev entries driver [ 4.112017] w83627hf: Found W83627HF chip at 0x290 [ 4.440112] w83627hf w83627hf.656: Enabling temp2, readings might not make sense [ 4.440738] w83627hf w83627hf.656: Enabling temp3, readings might not make sense [ 4.462425] abituguru: testing bank1 sensor 0 [ 4.482547] abituguru: alarm not raised during volt sensor test [ 4.532969] abituguru: found temp sensor [ 4.533687] abituguru: testing bank1 sensor 1 [ 4.553404] abituguru: alarm not raised during volt sensor test [ 4.603879] abituguru: found temp sensor [ 4.604618] abituguru: testing bank1 sensor 3 [ 4.625864] abituguru: found volt sensor [ 4.626594] abituguru: testing bank1 sensor 4 [ 4.647805] abituguru: found volt sensor [ 4.648529] abituguru: testing bank1 sensor 10 [ 4.669819] abituguru: found volt sensor [ 4.670540] abituguru: testing bank1 sensor 8 [ 4.691760] abituguru: found volt sensor [ 4.692428] abituguru: testing bank1 sensor 14 [ 4.712674] abituguru: found volt sensor [ 4.713344] abituguru: testing bank1 sensor 2 [ 4.733655] abituguru: found volt sensor [ 4.734375] abituguru: testing bank1 sensor 9 [ 4.755599] abituguru: found volt sensor [ 4.756266] abituguru: testing bank1 sensor 6 [ 4.776567] abituguru: found volt sensor [ 4.777238] abituguru: testing bank1 sensor 5 [ 4.797523] abituguru: found volt sensor [ 4.798145] abituguru: testing bank1 sensor 11 [ 4.818504] abituguru: found volt sensor [ 4.819238] abituguru: testing bank1 sensor 15 [ 4.839925] abituguru: alarm not raised during volt sensor test [ 4.890394] abituguru: found temp sensor [ 4.891126] abituguru: testing bank1 sensor 13 [ 4.912337] abituguru: found volt sensor [ 4.912959] abituguru: testing bank1 sensor 7 [ 4.933733] abituguru: alarm not raised during volt sensor test [ 4.983643] abituguru: alarm not raised during temp sensor test [ 4.984368] abituguru: testing bank1 sensor 12 [ 5.004655] abituguru: alarm not raised during volt sensor test [ 5.054517] abituguru: alarm not raised during temp sensor test [ 5.054970] abituguru: detecting number of fan sensors [ 5.054973] abituguru: bank2 sensor 5 does not seem to be a fan sensor: the threshold (0) is below the minimum (5) [ 5.054975] abituguru: found: 5 fan sensors [ 5.054983] abituguru: detecting number of PWM outputs [ 5.054985] abituguru: pwm channel 3 does not seem to be a pwm channel: settings[0] = C9 [ 5.054987] abituguru: found: 3 PWM outputs [ 5.054993] abituguru: found Abit uGuru [ 5.069732] input: Microsoft Microsoft? Digital Media Pro Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input2 [ 5.069979] input: USB HID v1.11 Keyboard [Microsoft Microsoft? Digital Media Pro Keyboard] on usb-0000:00:10.0-1 [ 5.098547] input: Microsoft Microsoft? Digital Media Pro Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/input/input3 [ 5.098808] input: USB HID v1.11 Device [Microsoft Microsoft? Digital Media Pro Keyboard] on usb-0000:00:10.0-1 [ 5.113573] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input4 [ 5.113927] input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:10.0-2 [ 5.114113] usbcore: registered new interface driver usbhid [ 5.114188] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 5.114308] Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC). [ 5.115146] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22 [ 5.115434] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 5.630247] ALSA device list: [ 5.630318] #0: VIA 8237 with ALC658D at 0xd800, irq 22 [ 5.630514] oprofile: using NMI interrupt. [ 5.630589] GRE over IPv4 tunneling driver [ 5.630911] TCP cubic registered [ 5.631193] NET: Registered protocol family 1 [ 5.631268] NET: Registered protocol family 17 [ 5.631344] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (version 2.00.00) [ 5.631590] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 [ 5.631663] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 [ 5.668896] kjournald starting. Commit interval 5 seconds [ 5.668979] EXT3-fs: mounted filesystem with ordered data mode. [ 5.669080] VFS: Mounted root (ext3 filesystem) readonly. [ 5.669203] Freeing unused kernel memory: 192k freed [ 8.343399] EXT3 FS on sda3, internal journal [ 8.615366] Adding 1004052k swap on /dev/sda2. Priority:-1 extents:1 across:1004052k [ 19.798004] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [ 19.798018] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode [ 19.798068] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode [ 20.007479] Velocity is AUTO mode [ 20.072792] [drm] Setting GART location based on new memory map [ 20.072949] [drm] Loading R200 Microcode [ 20.073014] [drm] writeback test succeeded in 1 usecs [ 23.324658] eth0: Link autonegation speed 100M bps full duplex - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/