Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Herve Codina <herve.codina@bootlin.com>
To:     Marek Vasut <marek.vasut+renesas@gmail.com>,
        Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
        Bjorn Helgaas <bhelgaas@google.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzk+dt@kernel.org>,
        Geert Uytterhoeven <geert+renesas@glider.be>,
        Magnus Damm <magnus.damm@gmail.com>,
        Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
        =?UTF-8?q?Krzysztof=20Wilczy=C5=84ski?= <kw@linux.com>
Cc:     Rob Herring <robh@kernel.org>, linux-pci@vger.kernel.org,
        linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, Sergey Shtylyov <s.shtylyov@omp.ru>,
        Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
        Clement Leger <clement.leger@bootlin.com>,
        Miquel Raynal <miquel.raynal@bootlin.com>,
        Herve Codina <herve.codina@bootlin.com>
Subject: [PATCH v5 6/6] ARM: dts: r9a06g032: Link the PCI USB devices to the USB PHY
Date:   Fri, 29 Apr 2022 15:41:43 +0200
Message-Id: <20220429134143.628428-8-herve.codina@bootlin.com>
In-Reply-To: <20220429134143.628428-1-herve.codina@bootlin.com>
References: <20220429134143.628428-1-herve.codina@bootlin.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Describe the PCI USB devices that are behind the PCI bridge, adding
necessary links to the USB PHY device.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r9a06g032.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
index 8cedc08ba3b9..db1e35381d9b 100644
--- a/arch/arm/boot/dts/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/r9a06g032.dtsi
@@ -121,6 +121,18 @@ pci_usb: pci@40030000 {
 			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
 					 0x0800 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
 					 0x1000 0 0 2 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x800 0 0 0 0>;
+				phys = <&usbphy>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x1000 0 0 0 0>;
+				phys = <&usbphy>;
+				phy-names = "usb";
+			};
 		};
 
 		uart0: serial@40060000 {
-- 
2.35.1