Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Thu, 28 Apr 2022 16:27:23 -0500
From:   Bjorn Helgaas <helgaas@kernel.org>
To:     ira.weiny@intel.com
Cc:     Dan Williams <dan.j.williams@intel.com>,
        Bjorn Helgaas <bhelgaas@google.com>,
        Jonathan Cameron <Jonathan.Cameron@huawei.com>,
        Christoph Hellwig <hch@infradead.org>,
        Alison Schofield <alison.schofield@intel.com>,
        Vishal Verma <vishal.l.verma@intel.com>,
        Ben Widawsky <ben.widawsky@intel.com>,
        linux-kernel@vger.kernel.org, linux-cxl@vger.kernel.org,
        linux-pci@vger.kernel.org
Subject: Re: [PATCH V8 03/10] PCI: Create PCI library functions in support of
 DOE mailboxes.
Message-ID: <20220428212723.GA44322@bhelgaas>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20220414203237.2198665-4-ira.weiny@intel.com>
Precedence: bulk

On Thu, Apr 14, 2022 at 01:32:30PM -0700, ira.weiny@intel.com wrote:
> From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> 
> Introduced in a PCI v6.0[1], DOE provides a config space based mailbox
 
  Introduced in PCIe r6.0, sec 6.30, DOE ...

> with standard protocol discovery.  Each mailbox is accessed through a
> DOE Extended Capability.
> 
> Each DOE mailbox must support the DOE discovery protocol in addition to
> any number of additional protocols.
> 
> Define core PCI functionality to manage a single PCI DOE mailbox at a
> defined config space offset.  Functionality includes creating, supported
> protocol queries, submit tasks to, and destroying the new state objects.
> 
> If interrupts are desired, interrupts vectors should be allocated prior
> to asking for irq's when creating a mailbox object.
                IRQs

> [1] https://members.pcisig.com/wg/PCI-SIG/document/16609

The link is only useful for PCI-SIG members, and only as long as the
SIG maintains this structure.  I think "PCIe r6.0" is sufficient.

> Cc: Christoph Hellwig <hch@infradead.org>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Co-developed-by: Ira Weiny <ira.weiny@intel.com>
> Signed-off-by: Ira Weiny <ira.weiny@intel.com>

Acked-by: Bjorn Helgaas <bhelgaas@google.com>

Minor comments below.

> ---
> Changes from V7
> 	Add a Kconfig for this functionality
> 	Fix bug in pci_doe_supports_prot()
> 	Rebased on cxl-pending
> 
> Changes from V6
> 	Clean up signed off by lines
> 	Make this functionality all PCI library functions
> 	Clean up header files
> 	s/pci_doe_irq/pci_doe_irq_handler
> 	Use pci_{request,free}_irq
> 		Remove irq_name (maintained by pci_request_irq)
> 	Fix checks to use an irq
> 	Consistently use u16 for cap_offset
> 	Cleanup kdocs and comments
> 	Create a helper retire_cur_task() to handle locking of the
> 		current task pointer.
> 	Remove devm_ calls from PCI layer.
> 		The devm_ calls do not allow for the pci_doe_mb objects
> 		to be tied to an auxiliary device.  Leave it to the
> 		caller to use devm_ if desired.
> 	From Dan Williams
> 		s/cb/end_task/; Pass pci_doe_task to end_task
> 		Clarify exchange/task/request/response.
> 			Merge pci_doe_task and pci_doe_exchange into
> 			pci_doe_task which represents a single
> 			request/response task for the state machine to
> 			process.
> 		Simplify submitting work to the mailbox
> 			Replace pci_doe_exchange_sync() with
> 			pci_doe_submit_task() Consumers of the mailbox
> 			are now responsible for setting up callbacks
> 			within a task object and submitting them to the
> 			mailbox to be processed.
> 		Remove WARN_ON when task != NULL and be sure to abort that task.
> 		Convert abort/dead to atomic flags
> 		s/state_lock/task_lock to better define what the lock is
> 			protecting
> 		Remove all the auxiliary bus code from the PCI layer
> 			The PCI layer provides helpers to use the DOE
> 			Mailboxes.  Each subsystem can then use the
> 			helpers as they see fit.  The CXL layer in this
> 			series uses aux devices to manage the new
> 			pci_doe_mb objects.
> 
> 	From Bjorn
> 		Clarify the fact that DOE mailboxes are capabilities of
> 			the device.
> 		Code clean ups
> 		Cleanup Makefile
> 		Update references to PCI SIG spec v6.0
> 		Move this attribution here:
> 		This code is based on Jonathan's V4 series here:
> 		https://lore.kernel.org/linux-cxl/20210524133938.2815206-1-Jonathan.Cameron@huawei.com/
> 
> Changes from V5
> 	From Bjorn
> 		s/pci_WARN/pci_warn
> 			Add timeout period to print
> 		Trim to 80 chars
> 		Use Tabs for DOE define spacing
> 		Use %#x for clarity
> 	From Jonathan
> 		Addresses concerns about the order of unwinding stuff
> 		s/doe/doe_dev in pci_doe_exhcnage_sync
> 		Correct kernel Doc comment
> 		Move pci_doe_task_complete() down in the file.
> 		Rework pci_doe_irq()
> 			process STATUS_ERROR first
> 			Return IRQ_NONE if the irq is not processed
> 			Use PCI_DOE_STATUS_INT_STATUS explicitly to
> 				clear the irq
> 	Clean up goto label s/err_free_irqs/err_free_irq
> 	use devm_kzalloc for doe struct
> 	clean up error paths in pci_doe_probe
> 	s/pci_doe_drv/pci_doe
> 	remove include mutex.h
> 	remove device name and define, move it in the next patch which uses it
> 	use devm_kasprintf() for irq_name
> 	use devm_request_irq()
> 	remove pci_doe_unregister()
> 		[get/put]_device() were unneeded and with the use of
> 		devm_* this function can be removed completely.
> 	refactor pci_doe_register and s/pci_doe_register/pci_doe_reg_irq
> 		make this function just a registration of the irq and
> 		move pci_doe_abort() into pci_doe_probe()
> 	use devm_* to allocate the protocol array
> 
> Changes from Jonathan's V4
> 	Move the DOE MB code into the DOE auxiliary driver
> 	Remove Task List in favor of a wait queue
> 
> Changes from Ben
> 	remove CXL references
> 	propagate rc from pci functions on error
> 
> squash: make PCI_DOE optional based on selecting by those who need it.
> 
> squash: Create PCI library functions
> 
> Fix bug in protocol support check
> ---
>  drivers/pci/Kconfig           |   3 +
>  drivers/pci/Makefile          |   1 +
>  drivers/pci/pci-doe.c         | 607 ++++++++++++++++++++++++++++++++++
>  include/linux/pci-doe.h       | 119 +++++++
>  include/uapi/linux/pci_regs.h |  29 +-
>  5 files changed, 758 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/pci/pci-doe.c
>  create mode 100644 include/linux/pci-doe.h
> 
> diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
> index 133c73207782..b2f2e588a817 100644
> --- a/drivers/pci/Kconfig
> +++ b/drivers/pci/Kconfig
> @@ -121,6 +121,9 @@ config XEN_PCIDEV_FRONTEND
>  config PCI_ATS
>  	bool
>  
> +config PCI_DOE
> +	bool
> +
>  config PCI_ECAM
>  	bool
>  
> diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
> index 0da6b1ebc694..b609d8ad813d 100644
> --- a/drivers/pci/Makefile
> +++ b/drivers/pci/Makefile
> @@ -31,6 +31,7 @@ obj-$(CONFIG_PCI_ECAM)		+= ecam.o
>  obj-$(CONFIG_PCI_P2PDMA)	+= p2pdma.o
>  obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o
>  obj-$(CONFIG_VGA_ARB)		+= vgaarb.o
> +obj-$(CONFIG_PCI_DOE)		+= pci-doe.o

Is there value in the "pci-" prefix?  There are a few other files with
the prefix, but I can't remember why.  Most things are of the form
"doe.c".

>  # Endpoint library must be initialized before its users
>  obj-$(CONFIG_PCI_ENDPOINT)	+= endpoint/
> diff --git a/drivers/pci/pci-doe.c b/drivers/pci/pci-doe.c
> new file mode 100644
> index 000000000000..ccf936421d2a
> --- /dev/null
> +++ b/drivers/pci/pci-doe.c
> @@ -0,0 +1,607 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Data Object Exchange
> + * https://members.pcisig.com/wg/PCI-SIG/document/16609

I think "PCIe r6.0, sec 6.30" is more generally useful.

> + * Copyright (C) 2021 Huawei
> + *	Jonathan Cameron <Jonathan.Cameron@huawei.com>
> + *
> + * Copyright (C) 2022 Intel Corporation
> + *	Ira Weiny <ira.weiny@intel.com>
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/delay.h>
> +#include <linux/jiffies.h>
> +#include <linux/mutex.h>
> +#include <linux/pci.h>
> +#include <linux/pci-doe.h>
> +#include <linux/workqueue.h>
> +
> +#define PCI_DOE_PROTOCOL_DISCOVERY 0
> +
> +#define PCI_DOE_BUSY_MAX_RETRIES 16
> +#define PCI_DOE_POLL_INTERVAL (HZ / 128)
> +
> +/* Timeout of 1 second from 6.30.2 Operation, PCI Spec v6.0 */

Pedantic: the PCI specs use "r6.0", not "v6.0".  Reverse for ACPI.  Of
course.  Even worse, PCI uses "Revision" for the major, "Version" for
the minor.

> +#define PCI_DOE_TIMEOUT HZ
> +
> +static irqreturn_t pci_doe_irq_handler(int irq, void *data)
> +{
> +	struct pci_doe_mb *doe_mb = data;
> +	struct pci_dev *pdev = doe_mb->pdev;
> +	int offset = doe_mb->cap_offset;
> +	u32 val;
> +
> +	pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val);
> +
> +	/* Leave the error case to be handled outside IRQ */

s/irq/IRQ/ for similar comment and log message uses below.

> +	if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) {
> +		mod_delayed_work(system_wq, &doe_mb->statemachine, 0);
> +		return IRQ_HANDLED;
> +	}
> +
> +	if (FIELD_GET(PCI_DOE_STATUS_INT_STATUS, val)) {
> +		pci_write_config_dword(pdev, offset + PCI_DOE_STATUS,
> +					PCI_DOE_STATUS_INT_STATUS);
> +		mod_delayed_work(system_wq, &doe_mb->statemachine, 0);
> +		return IRQ_HANDLED;
> +	}
> +
> +	return IRQ_NONE;
> +}
> +
> +/*
> + * Only called when safe to directly access the DOE from
> + * doe_statemachine_work().  Outside access is not protected.  Users who
> + * perform such access are left with the pieces.
> + */
> +static void pci_doe_abort_start(struct pci_doe_mb *doe_mb)
> +{
> +	struct pci_dev *pdev = doe_mb->pdev;
> +	int offset = doe_mb->cap_offset;
> +	u32 val;
> +
> +	val = PCI_DOE_CTRL_ABORT;
> +	if (doe_mb->irq >= 0)
> +		val |= PCI_DOE_CTRL_INT_EN;
> +	pci_write_config_dword(pdev, offset + PCI_DOE_CTRL, val);
> +
> +	doe_mb->timeout_jiffies = jiffies + HZ;
> +	schedule_delayed_work(&doe_mb->statemachine, HZ);
> +}
> +
> +static int pci_doe_send_req(struct pci_doe_mb *doe_mb, struct pci_doe_task *task)

Wrap to fit in 80 columns, like the rest of drivers/pci/*

> +{
> +	struct pci_dev *pdev = doe_mb->pdev;
> +	int offset = doe_mb->cap_offset;
> +	u32 val;
> +	int i;
> +
> +	/*
> +	 * Check the DOE busy bit is not set. If it is set, this could indicate
> +	 * someone other than Linux (e.g. firmware) is using the mailbox. Note
> +	 * it is expected that firmware and OS will negotiate access rights via
> +	 * an, as yet to be defined method.
> +	 */
> +	pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val);
> +	if (FIELD_GET(PCI_DOE_STATUS_BUSY, val))
> +		return -EBUSY;
> +
> +	if (FIELD_GET(PCI_DOE_STATUS_ERROR, val))
> +		return -EIO;
> +
> +	/* Write DOE Header */
> +	val = FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_1_VID, task->prot.vid) |
> +		FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, task->prot.type);
> +	pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, val);
> +	/* Length is 2 DW of header + length of payload in DW */
> +	pci_write_config_dword(pdev, offset + PCI_DOE_WRITE,
> +			       FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH,
> +					  2 + task->request_pl_sz /
> +						sizeof(u32)));
> +	for (i = 0; i < task->request_pl_sz / sizeof(u32); i++)
> +		pci_write_config_dword(pdev, offset + PCI_DOE_WRITE,
> +				       task->request_pl[i]);
> +
> +	val = PCI_DOE_CTRL_GO;
> +	if (doe_mb->irq >= 0)
> +		val |= PCI_DOE_CTRL_INT_EN;
> +
> +	pci_write_config_dword(pdev, offset + PCI_DOE_CTRL, val);
> +	/* Request is sent - now wait for poll or IRQ */
> +	return 0;
> +}
> +
> +static int pci_doe_recv_resp(struct pci_doe_mb *doe_mb, struct pci_doe_task *task)
> +{
> +	struct pci_dev *pdev = doe_mb->pdev;
> +	int offset = doe_mb->cap_offset;
> +	size_t length;
> +	u32 val;
> +	int i;
> +
> +	/* Read the first dword to get the protocol */
> +	pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val);
> +	if ((FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_VID, val) != task->prot.vid) ||
> +	    (FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, val) != task->prot.type)) {
> +		pci_err(pdev,
> +			"Expected [VID, Protocol] = [%#x, %#x], got [%#x, %#x]\n",

Needs a "DOE" or similar hint for where to look when you see this
error.

"%04x" is the typical way we print a PCI vendor ID.  I guess a leading
"0x" isn't a disaster, but I do think it should be 4 hex digits so it
doesn't look like a length or something.

It looks like you anticipate multiple DOE capabilities.  Maybe
messages should include the capability offset to be specific?
I see you print with %u in pci_doe_create_mb().  I'm pretty sure
"lspci -vv" prints them in hex, and it's probably useful to match.

> +			task->prot.vid, task->prot.type,
> +			FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_VID, val),
> +			FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, val));
> +		return -EIO;
> +	}
> +
> +	pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0);
> +	/* Read the second dword to get the length */
> +	pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val);
> +	pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0);
> +
> +	length = FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH, val);
> +	if (length > SZ_1M || length < 2)
> +		return -EIO;
> +
> +	/* First 2 dwords have already been read */
> +	length -= 2;
> +	/* Read the rest of the response payload */
> +	for (i = 0; i < min(length, task->response_pl_sz / sizeof(u32)); i++) {
> +		pci_read_config_dword(pdev, offset + PCI_DOE_READ,
> +				      &task->response_pl[i]);
> +		pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0);
> +	}
> +
> +	/* Flush excess length */
> +	for (; i < length; i++) {
> +		pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val);
> +		pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0);
> +	}
> +	/* Final error check to pick up on any since Data Object Ready */
> +	pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val);
> +	if (FIELD_GET(PCI_DOE_STATUS_ERROR, val))
> +		return -EIO;
> +
> +	return min(length, task->response_pl_sz / sizeof(u32)) * sizeof(u32);
> +}
> +
> +static void signal_task_complete(struct pci_doe_task *task, int rv)
> +{
> +	task->rv = rv;
> +	task->complete(task);
> +}
> +
> +static void retire_cur_task(struct pci_doe_mb *doe_mb)
> +{
> +	mutex_lock(&doe_mb->task_lock);
> +	doe_mb->cur_task = NULL;
> +	mutex_unlock(&doe_mb->task_lock);
> +	wake_up_interruptible(&doe_mb->wq);
> +}
> +
> +static void doe_statemachine_work(struct work_struct *work)
> +{
> +	struct delayed_work *w = to_delayed_work(work);
> +	struct pci_doe_mb *doe_mb = container_of(w, struct pci_doe_mb,
> +						 statemachine);
> +	struct pci_dev *pdev = doe_mb->pdev;
> +	int offset = doe_mb->cap_offset;
> +	struct pci_doe_task *task;
> +	u32 val;
> +	int rc;
> +
> +	mutex_lock(&doe_mb->task_lock);
> +	task = doe_mb->cur_task;
> +	mutex_unlock(&doe_mb->task_lock);
> +
> +	if (test_and_clear_bit(PCI_DOE_FLAG_ABORT, &doe_mb->flags)) {
> +		/*
> +		 * Currently only used during init - care needed if
> +		 * pci_doe_abort() is generally exposed as it would impact
> +		 * queries in flight.
> +		 */
> +		if (task)
> +			pr_err("Aborting with active task!\n");

This should be a dev_err() and probably include "DOE" or some kind of
hint about what this applies to.

> +		doe_mb->state = DOE_WAIT_ABORT;
> +		pci_doe_abort_start(doe_mb);
> +		return;
> +	}
> +
> +	switch (doe_mb->state) {
> +	case DOE_IDLE:
> +		if (task == NULL)
> +			return;
> +
> +		rc = pci_doe_send_req(doe_mb, task);

Add blank line before block comment.

> +		/*
> +		 * The specification does not provide any guidance on how long
> +		 * some other entity could keep the DOE busy, so try for 1
> +		 * second then fail. Busy handling is best effort only, because
> +		 * there is no way of avoiding racing against another user of
> +		 * the DOE.
> +		 */
> +		if (rc == -EBUSY) {
> +			doe_mb->busy_retries++;
> +			if (doe_mb->busy_retries == PCI_DOE_BUSY_MAX_RETRIES) {
> +				/* Long enough, fail this request */
> +				pci_warn(pdev,
> +					"DOE busy for too long (> 1 sec)\n");
> +				doe_mb->busy_retries = 0;
> +				goto err_busy;
> +			}
> +			schedule_delayed_work(w, HZ / PCI_DOE_BUSY_MAX_RETRIES);
> +			return;
> +		}
> +		if (rc)
> +			goto err_abort;
> +		doe_mb->busy_retries = 0;
> +
> +		doe_mb->state = DOE_WAIT_RESP;
> +		doe_mb->timeout_jiffies = jiffies + HZ;
> +		/* Now poll or wait for IRQ with timeout */
> +		if (doe_mb->irq >= 0)
> +			schedule_delayed_work(w, PCI_DOE_TIMEOUT);
> +		else
> +			schedule_delayed_work(w, PCI_DOE_POLL_INTERVAL);
> +		return;
> +
> +	case DOE_WAIT_RESP:
> +		/* Not possible to get here with NULL task */
> +		pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val);
> +		if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) {
> +			rc = -EIO;
> +			goto err_abort;
> +		}
> +
> +		if (!FIELD_GET(PCI_DOE_STATUS_DATA_OBJECT_READY, val)) {
> +			/* If not yet at timeout reschedule otherwise abort */
> +			if (time_after(jiffies, doe_mb->timeout_jiffies)) {
> +				rc = -ETIMEDOUT;
> +				goto err_abort;
> +			}
> +			schedule_delayed_work(w, PCI_DOE_POLL_INTERVAL);
> +			return;
> +		}
> +
> +		rc  = pci_doe_recv_resp(doe_mb, task);
> +		if (rc < 0)
> +			goto err_abort;
> +
> +		doe_mb->state = DOE_IDLE;
> +
> +		retire_cur_task(doe_mb);
> +		/* Set the return value to the length of received payload */
> +		signal_task_complete(task, rc);
> +
> +		return;
> +
> +	case DOE_WAIT_ABORT:
> +	case DOE_WAIT_ABORT_ON_ERR:
> +		pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val);
> +
> +		if (!FIELD_GET(PCI_DOE_STATUS_ERROR, val) &&
> +		    !FIELD_GET(PCI_DOE_STATUS_BUSY, val)) {
> +			/* Back to normal state - carry on */
> +			retire_cur_task(doe_mb);
> +
> +			/*
> +			 * For deliberately triggered abort, someone is
> +			 * waiting.
> +			 */
> +			if (doe_mb->state == DOE_WAIT_ABORT) {
> +				if (task)
> +					signal_task_complete(task, -EFAULT);
> +				complete(&doe_mb->abort_c);
> +			}
> +
> +			doe_mb->state = DOE_IDLE;
> +			return;
> +		}
> +		if (time_after(jiffies, doe_mb->timeout_jiffies)) {
> +			/* Task has timed out and is dead - abort */
> +			pci_err(pdev, "DOE ABORT timed out\n");
> +			set_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags);
> +			retire_cur_task(doe_mb);
> +
> +			if (doe_mb->state == DOE_WAIT_ABORT) {
> +				if (task)
> +					signal_task_complete(task, -EFAULT);
> +				complete(&doe_mb->abort_c);
> +			}
> +		}
> +		return;
> +	}
> +
> +err_abort:
> +	doe_mb->state = DOE_WAIT_ABORT_ON_ERR;
> +	pci_doe_abort_start(doe_mb);
> +err_busy:
> +	signal_task_complete(task, rc);
> +	if (doe_mb->state == DOE_IDLE)
> +		retire_cur_task(doe_mb);
> +}
> +
> +static void pci_doe_task_complete(struct pci_doe_task *task)
> +{
> +	complete(task->private);
> +}
> +
> +static int pci_doe_discovery(struct pci_doe_mb *doe_mb, u8 *index, u16 *vid,
> +			     u8 *protocol)
> +{
> +	u32 request_pl = FIELD_PREP(PCI_DOE_DATA_OBJECT_DISC_REQ_3_INDEX,
> +				    *index);
> +	u32 response_pl;
> +	DECLARE_COMPLETION_ONSTACK(c);
> +	struct pci_doe_task task = {
> +		.prot.vid = PCI_VENDOR_ID_PCI_SIG,
> +		.prot.type = PCI_DOE_PROTOCOL_DISCOVERY,
> +		.request_pl = &request_pl,
> +		.request_pl_sz = sizeof(request_pl),
> +		.response_pl = &response_pl,
> +		.response_pl_sz = sizeof(response_pl),
> +		.complete = pci_doe_task_complete,
> +		.private = &c,
> +	};
> +	int ret;
> +
> +	ret = pci_doe_submit_task(doe_mb, &task);
> +	if (ret < 0)
> +		return ret;
> +
> +	wait_for_completion(&c);
> +
> +	if (task.rv != sizeof(response_pl))
> +		return -EIO;
> +
> +	*vid = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_VID, response_pl);
> +	*protocol = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_PROTOCOL,
> +			      response_pl);
> +	*index = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_NEXT_INDEX,
> +			   response_pl);
> +
> +	return 0;
> +}
> +
> +static int pci_doe_cache_protocols(struct pci_doe_mb *doe_mb)
> +{
> +	u8 index = 0;
> +	int num_prots;
> +	int rc;
> +
> +	/* Discovery protocol must always be supported and must report itself */
> +	num_prots = 1;
> +
> +	doe_mb->prots = kcalloc(num_prots, sizeof(*doe_mb->prots), GFP_KERNEL);
> +	if (!doe_mb->prots)
> +		return -ENOMEM;
> +
> +	/*
> +	 * NOTE: doe_mb_prots is freed by pci_doe_free_mb automatically on

"pci_doe_free_mb()" to match other function name references.

> +	 * error if pci_doe_cache_protocols() fails past this point.
> +	 */
> +	do {
> +		struct pci_doe_protocol *prot;
> +
> +		prot = &doe_mb->prots[num_prots - 1];
> +		rc = pci_doe_discovery(doe_mb, &index, &prot->vid, &prot->type);
> +		if (rc)
> +			return rc;
> +
> +		if (index) {
> +			struct pci_doe_protocol *prot_new;
> +
> +			num_prots++;
> +			prot_new = krealloc(doe_mb->prots,
> +					    sizeof(*doe_mb->prots) * num_prots,
> +					    GFP_KERNEL);
> +			if (!prot_new)
> +				return -ENOMEM;
> +
> +			doe_mb->prots = prot_new;
> +		}
> +	} while (index);
> +
> +	doe_mb->num_prots = num_prots;
> +	return 0;
> +}
> +
> +static int pci_doe_abort(struct pci_doe_mb *doe_mb)
> +{
> +	reinit_completion(&doe_mb->abort_c);
> +	set_bit(PCI_DOE_FLAG_ABORT, &doe_mb->flags);
> +	schedule_delayed_work(&doe_mb->statemachine, 0);
> +	wait_for_completion(&doe_mb->abort_c);
> +
> +	if (test_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags))
> +		return -EIO;
> +
> +	return 0;
> +}
> +
> +static int pci_doe_request_irq(struct pci_doe_mb *doe_mb)
> +{
> +	struct pci_dev *pdev = doe_mb->pdev;
> +	int offset = doe_mb->cap_offset;
> +	int doe_irq, rc;
> +	u32 val;
> +
> +	pci_read_config_dword(pdev, offset + PCI_DOE_CAP, &val);
> +
> +	if (!FIELD_GET(PCI_DOE_CAP_INT, val))
> +		return -EOPNOTSUPP;
> +
> +	doe_irq = FIELD_GET(PCI_DOE_CAP_IRQ, val);
> +	rc = pci_request_irq(pdev, doe_irq, pci_doe_irq_handler,
> +			     NULL, doe_mb,
> +			     "DOE[%d:%s]", doe_irq, pci_name(pdev));
> +	if (rc)
> +		return rc;
> +
> +	doe_mb->irq = doe_irq;
> +	pci_write_config_dword(pdev, offset + PCI_DOE_CTRL,
> +			       PCI_DOE_CTRL_INT_EN);
> +	return 0;
> +}
> +
> +static void pci_doe_free_mb(struct pci_doe_mb *doe_mb)
> +{
> +	if (doe_mb->irq >= 0)
> +		pci_free_irq(doe_mb->pdev, doe_mb->irq, doe_mb);
> +	kfree(doe_mb->prots);
> +	kfree(doe_mb);
> +}
> +
> +/**
> + * pci_doe_create_mb() - Create a DOE mailbox object
> + *
> + * @pdev: PCI device to create the DOE mailbox for
> + * @cap_offset: Offset of the DOE mailbox
> + * @use_irq: Should the state machine use an irq
> + *
> + * Create a single mailbox object to manage the mailbox protocol at the
> + * cap_offset specified.
> + *
> + * Caller should allocate PCI irq vectors before setting use_irq.
> + *
> + * RETURNS: created mailbox object on success
> + *	    ERR_PTR(-errno) on failure
> + */
> +struct pci_doe_mb *pci_doe_create_mb(struct pci_dev *pdev, u16 cap_offset,
> +				     bool use_irq)
> +{
> +	struct pci_doe_mb *doe_mb;
> +	int rc;
> +
> +	doe_mb = kzalloc(sizeof(*doe_mb), GFP_KERNEL);
> +	if (!doe_mb)
> +		return ERR_PTR(-ENOMEM);
> +
> +	doe_mb->pdev = pdev;
> +	init_completion(&doe_mb->abort_c);
> +	doe_mb->irq = -1;
> +	doe_mb->cap_offset = cap_offset;
> +
> +	init_waitqueue_head(&doe_mb->wq);
> +	mutex_init(&doe_mb->task_lock);
> +	INIT_DELAYED_WORK(&doe_mb->statemachine, doe_statemachine_work);
> +	doe_mb->state = DOE_IDLE;
> +
> +	if (use_irq) {
> +		rc = pci_doe_request_irq(doe_mb);
> +		if (rc)
> +			pci_err(pdev, "DOE request irq failed for mailbox @ %u : %d\n",
> +				cap_offset, rc);
> +	}
> +
> +	/* Reset the mailbox by issuing an abort */
> +	rc = pci_doe_abort(doe_mb);
> +	if (rc) {
> +		pci_err(pdev, "DOE failed to reset the mailbox @ %u : %d\n",
> +			cap_offset, rc);
> +		pci_doe_free_mb(doe_mb);
> +		return ERR_PTR(rc);
> +	}
> +
> +	rc = pci_doe_cache_protocols(doe_mb);
> +	if (rc) {
> +		pci_err(pdev, "DOE failed to cache protocols for mailbox @ %u : %d\n",
> +			cap_offset, rc);
> +		pci_doe_free_mb(doe_mb);
> +		return ERR_PTR(rc);
> +	}
> +
> +	return doe_mb;
> +}
> +EXPORT_SYMBOL_GPL(pci_doe_create_mb);
> +
> +/**
> + * pci_doe_supports_prot() - Return if the DOE instance supports the given
> + *			     protocol
> + * @doe_mb: DOE mailbox capability to query
> + * @vid: Protocol Vendor ID
> + * @type: protocol type
             Protocol
> + *
> + * RETURNS: True if the DOE device supports the protocol specified

I think you typically use "DOE mailbox", not "DOE device".

> + */
> +bool pci_doe_supports_prot(struct pci_doe_mb *doe_mb, u16 vid, u8 type)
> +{
> +	int i;
> +
> +	/* The discovery protocol must always be supported */
> +	if (vid == PCI_VENDOR_ID_PCI_SIG && type == PCI_DOE_PROTOCOL_DISCOVERY)
> +		return true;
> +
> +	for (i = 0; i < doe_mb->num_prots; i++)
> +		if ((doe_mb->prots[i].vid == vid) &&
> +		    (doe_mb->prots[i].type == type))
> +			return true;
> +
> +	return false;
> +}
> +EXPORT_SYMBOL_GPL(pci_doe_supports_prot);
> +
> +/**
> + * pci_doe_submit_task() - Submit a task to be processed by the state machine
> + *
> + * @doe_mb: DOE mailbox capability to submit to
> + * @task: task to be queued
> + *
> + * Submit a DOE task (request/response) to the DOE mailbox to be processed.
> + * Returns upon queueing the task object.  If the queue is full this function
> + * will sleep until there is room in the queue.
> + *
> + * task->complete will be called when the state machine is done processing this
> + * task.
> + *
> + * Excess data will be discarded.
> + *
> + * RETURNS: 0 when task has been successful queued, -ERRNO on error
> + */
> +int pci_doe_submit_task(struct pci_doe_mb *doe_mb, struct pci_doe_task *task)
> +{
> +	if (!pci_doe_supports_prot(doe_mb, task->prot.vid, task->prot.type))
> +		return -EINVAL;
> +
> +	/* DOE requests must be a whole number of DW */
> +	if (task->request_pl_sz % sizeof(u32))
> +		return -EINVAL;
> +
> +again:
> +	mutex_lock(&doe_mb->task_lock);
> +	if (doe_mb->cur_task) {
> +		mutex_unlock(&doe_mb->task_lock);
> +		wait_event_interruptible(doe_mb->wq, doe_mb->cur_task == NULL);
> +		goto again;
> +	}
> +
> +	if (test_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags)) {
> +		mutex_unlock(&doe_mb->task_lock);
> +		return -EIO;
> +	}
> +	doe_mb->cur_task = task;
> +	mutex_unlock(&doe_mb->task_lock);
> +	schedule_delayed_work(&doe_mb->statemachine, 0);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(pci_doe_submit_task);
> +
> +/**
> + * pci_doe_destroy_mb() - Destroy a DOE mailbox object created with
> + * pci_doe_create_mb()
> + *
> + * @doe_mb: DOE mailbox capability structure to destroy
> + *
> + * The mailbox becomes invalid and should not be used after this call.
> + */
> +void pci_doe_destroy_mb(struct pci_doe_mb *doe_mb)
> +{
> +	/* abort any work in progress */
> +	pci_doe_abort(doe_mb);
> +
> +	/* halt the state machine */
> +	cancel_delayed_work_sync(&doe_mb->statemachine);
> +
> +	pci_doe_free_mb(doe_mb);
> +}
> +EXPORT_SYMBOL_GPL(pci_doe_destroy_mb);
> diff --git a/include/linux/pci-doe.h b/include/linux/pci-doe.h
> new file mode 100644
> index 000000000000..7e6ebaf9930a
> --- /dev/null
> +++ b/include/linux/pci-doe.h
> @@ -0,0 +1,119 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Data Object Exchange
> + * https://members.pcisig.com/wg/PCI-SIG/document/16609

Ditto.

> + *
> + * Copyright (C) 2021 Huawei
> + *     Jonathan Cameron <Jonathan.Cameron@huawei.com>
> + *
> + * Copyright (C) 2022 Intel Corporation
> + *	Ira Weiny <ira.weiny@intel.com>
> + */
> +
> +#ifndef LINUX_PCI_DOE_H
> +#define LINUX_PCI_DOE_H
> +
> +#include <linux/completion.h>
> +
> +enum pci_doe_state {
> +	DOE_IDLE,
> +	DOE_WAIT_RESP,
> +	DOE_WAIT_ABORT,
> +	DOE_WAIT_ABORT_ON_ERR,
> +};
> +
> +#define PCI_DOE_FLAG_ABORT	0
> +#define PCI_DOE_FLAG_DEAD	1
> +
> +struct pci_doe_protocol {
> +	u16 vid;
> +	u8 type;
> +};
> +
> +/**
> + * struct pci_doe_task - represents a single query/response
> + *
> + * @prot: DOE Protocol
> + * @request_pl: The request payload
> + * @request_pl_sz: Size of the request payload
> + * @response_pl: The response payload
> + * @response_pl_sz: Size of the response payload
> + * @rv: Return value.  Length of received response or error
> + * @complete: Called when task is complete
> + * @private: Private data for the consumer
> + */
> +struct pci_doe_task {
> +	struct pci_doe_protocol prot;
> +	u32 *request_pl;
> +	size_t request_pl_sz;
> +	u32 *response_pl;
> +	size_t response_pl_sz;
> +	int rv;
> +	void (*complete)(struct pci_doe_task *task);
> +	void *private;
> +};
> +
> +/**
> + * struct pci_doe_mb - State for a single DOE mailbox
> + *
> + * This state is used to manage a single DOE mailbox capability.  All fields
> + * should be considered opaque to the consumers and the structure passed into
> + * the helpers below after being created by devm_pci_doe_create()
> + *
> + * @pdev: PCI device this belongs to mailbox belongs to
> + * @abort_c: Completion used for initial abort handling
> + * @irq: Interrupt used for signaling DOE ready or abort
> + * @prots: Array of protocols supported on this DOE
> + * @num_prots: Size of prots array
> + * @cap_offset: Capability offset
> + * @wq: Wait queue to wait on if a query is in progress
> + * @cur_task: Current task the state machine is working on
> + * @task_lock: Protect cur_task
> + * @statemachine: Work item for the DOE state machine
> + * @state: Current state of this DOE
> + * @timeout_jiffies: 1 second after GO set
> + * @busy_retries: Count of retry attempts
> + * @flags: Bit array of PCI_DOE_FLAG_* flags
> + *
> + * Note: prots can't be allocated with struct size because the number of
> + * protocols is not known until after this structure is in use.  However, the
> + * single discovery protocol is always required to query for the number of
> + * protocols.
> + */
> +struct pci_doe_mb {
> +	struct pci_dev *pdev;
> +	struct completion abort_c;
> +	int irq;
> +	struct pci_doe_protocol *prots;
> +	int num_prots;
> +	u16 cap_offset;
> +
> +	wait_queue_head_t wq;
> +	struct pci_doe_task *cur_task;
> +	struct mutex task_lock;
> +	struct delayed_work statemachine;
> +	enum pci_doe_state state;
> +	unsigned long timeout_jiffies;
> +	unsigned int busy_retries;
> +	unsigned long flags;
> +};
> +
> +/**
> + * pci_doe_for_each_off - Iterate each DOE capability
> + * @pdev: struct pci_dev to iterate
> + * @off: u16 of config space offset of each mailbox capability found
> + */
> +#define pci_doe_for_each_off(pdev, off) \
> +	for (off = pci_find_next_ext_capability(pdev, off, \
> +					PCI_EXT_CAP_ID_DOE); \
> +		off > 0; \
> +		off = pci_find_next_ext_capability(pdev, off, \
> +					PCI_EXT_CAP_ID_DOE))
> +
> +struct pci_doe_mb *pci_doe_create_mb(struct pci_dev *pdev, u16 cap_offset,
> +				     bool use_irq);
> +void pci_doe_destroy_mb(struct pci_doe_mb *doe_mb);
> +bool pci_doe_supports_prot(struct pci_doe_mb *doe_mb, u16 vid, u8 type);
> +int pci_doe_submit_task(struct pci_doe_mb *doe_mb, struct pci_doe_task *task);
> +
> +#endif
> diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
> index bee1a9ed6e66..4e96b45ee36d 100644
> --- a/include/uapi/linux/pci_regs.h
> +++ b/include/uapi/linux/pci_regs.h
> @@ -736,7 +736,8 @@
>  #define PCI_EXT_CAP_ID_DVSEC	0x23	/* Designated Vendor-Specific */
>  #define PCI_EXT_CAP_ID_DLF	0x25	/* Data Link Feature */
>  #define PCI_EXT_CAP_ID_PL_16GT	0x26	/* Physical Layer 16.0 GT/s */
> -#define PCI_EXT_CAP_ID_MAX	PCI_EXT_CAP_ID_PL_16GT
> +#define PCI_EXT_CAP_ID_DOE	0x2E	/* Data Object Exchange */
> +#define PCI_EXT_CAP_ID_MAX	PCI_EXT_CAP_ID_DOE
>  
>  #define PCI_EXT_CAP_DSN_SIZEOF	12
>  #define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40
> @@ -1102,4 +1103,30 @@
>  #define  PCI_PL_16GT_LE_CTRL_USP_TX_PRESET_MASK		0x000000F0
>  #define  PCI_PL_16GT_LE_CTRL_USP_TX_PRESET_SHIFT	4
>  
> +/* Data Object Exchange */
> +#define PCI_DOE_CAP		0x04    /* DOE Capabilities Register */
> +#define  PCI_DOE_CAP_INT			0x00000001  /* Interrupt Support */
> +#define  PCI_DOE_CAP_IRQ			0x00000ffe  /* Interrupt Message Number */
> +#define PCI_DOE_CTRL		0x08    /* DOE Control Register */
> +#define  PCI_DOE_CTRL_ABORT			0x00000001  /* DOE Abort */
> +#define  PCI_DOE_CTRL_INT_EN			0x00000002  /* DOE Interrupt Enable */
> +#define  PCI_DOE_CTRL_GO			0x80000000  /* DOE Go */
> +#define PCI_DOE_STATUS		0x0c    /* DOE Status Register */
> +#define  PCI_DOE_STATUS_BUSY			0x00000001  /* DOE Busy */
> +#define  PCI_DOE_STATUS_INT_STATUS		0x00000002  /* DOE Interrupt Status */
> +#define  PCI_DOE_STATUS_ERROR			0x00000004  /* DOE Error */
> +#define  PCI_DOE_STATUS_DATA_OBJECT_READY	0x80000000  /* Data Object Ready */
> +#define PCI_DOE_WRITE		0x10    /* DOE Write Data Mailbox Register */
> +#define PCI_DOE_READ		0x14    /* DOE Read Data Mailbox Register */
> +
> +/* DOE Data Object - note not actually registers */
> +#define PCI_DOE_DATA_OBJECT_HEADER_1_VID		0x0000ffff
> +#define PCI_DOE_DATA_OBJECT_HEADER_1_TYPE		0x00ff0000
> +#define PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH		0x0003ffff
> +
> +#define PCI_DOE_DATA_OBJECT_DISC_REQ_3_INDEX		0x000000ff
> +#define PCI_DOE_DATA_OBJECT_DISC_RSP_3_VID		0x0000ffff
> +#define PCI_DOE_DATA_OBJECT_DISC_RSP_3_PROTOCOL		0x00ff0000
> +#define PCI_DOE_DATA_OBJECT_DISC_RSP_3_NEXT_INDEX	0xff000000
> +
>  #endif /* LINUX_PCI_REGS_H */
> -- 
> 2.35.1
>