Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Rohit Agarwal <quic_rohiagar@quicinc.com>
To:     agross@kernel.org, bjorn.andersson@linaro.org,
        gregkh@linuxfoundation.org, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org
Cc:     manivannan.sadhasivam@linaro.org, linux-arm-msm@vger.kernel.org,
        linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        Rohit Agarwal <quic_rohiagar@quicinc.com>
Subject: [PATCH v2 4/4] ARM: dts: qcom: sdx65-mtp: Enable USB3 and PHY support
Date:   Mon,  2 May 2022 14:36:35 +0530
Message-Id: <1651482395-29443-5-git-send-email-quic_rohiagar@quicinc.com>
In-Reply-To: <1651482395-29443-1-git-send-email-quic_rohiagar@quicinc.com>
References: <1651482395-29443-1-git-send-email-quic_rohiagar@quicinc.com>
Precedence: bulk

Enable the support for USB3 controller, QMP PHY and HS PHY on SDX65 MTP.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
 arch/arm/boot/dts/qcom-sdx65-mtp.dts | 29 +++++++++++++++++++++++++----
 1 file changed, 25 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index 79dc31a..6920524 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -123,7 +123,7 @@
 			regulator-max-microvolt = <1300000>;
 		};
 
-		ldo1 {
+		vreg_l1b_1p2: ldo1 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -141,13 +141,13 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		ldo4 {
+		vreg_l4b_0p88: ldo4 {
 			regulator-min-microvolt = <880000>;
 			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		ldo5 {
+		vreg_l5b_1p8: ldo5 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -177,7 +177,7 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		ldo10 {
+		vreg_l10b_3p08: ldo10 {
 			regulator-min-microvolt = <3088000>;
 			regulator-max-microvolt = <3088000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -244,3 +244,24 @@
 		};
 	};
 };
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vreg_l4b_0p88>;
+	vdda33-supply = <&vreg_l10b_3p08>;
+	vdda18-supply = <&vreg_l5b_1p8>;
+};
+
+&usb_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l4b_0p88>;
+	vdda-pll-supply = <&vreg_l1b_1p2>;
+};
-- 
2.7.4