Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
From:   Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To:     vkoul@kernel.org
Cc:     alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
        pierre-louis.bossart@linux.intel.com, bard.liao@intel.com,
        Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
        Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Subject: [PATCH] soundwire: qcom: adjust autoenumeration timeout
Date:   Fri, 29 Apr 2022 17:09:28 +0100
Message-Id: <20220429160928.24614-1-srinivas.kandagatla@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Currently timeout for autoenumeration during probe and bus reset is set to
2 secs which is really a big value. This can have an adverse effect on
boot time if the slave device is not ready/reset.
This was the case with wcd938x which was not reset yet but we spent 2
secs waiting in the soundwire controller probe. Reduce this time to
1/10 of Hz which should be good enough time to finish autoenumeration
if any slaves are available on the bus.

Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 drivers/soundwire/qcom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index da1ad7ebb1aa..432e5cb9a4d2 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -105,7 +105,7 @@
 
 #define SWRM_SPECIAL_CMD_ID	0xF
 #define MAX_FREQ_NUM		1
-#define TIMEOUT_MS		(2 * HZ)
+#define TIMEOUT_MS		(HZ/10)
 #define QCOM_SWRM_MAX_RD_LEN	0x1
 #define QCOM_SDW_MAX_PORTS	14
 #define DEFAULT_CLK_FREQ	9600000
-- 
2.21.0