Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) client-ip=2620:137:e000::1:18;
From:   Michael Walle <michael@walle.cc>
To:     Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>,
        Nicolas Ferre <nicolas.ferre@microchip.com>
Cc:     Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
        soc@kernel.org, linux-arm-kernel@lists.infradead.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
        Alexandre Belloni <alexandre.belloni@bootlin.com>,
        Claudiu Beznea <claudiu.beznea@microchip.com>,
        Tudor.Ambarus@microchip.com,
        Horatiu Vultur <horatiu.vultur@microchip.com>,
        Michael Walle <michael@walle.cc>
Subject: [PATCH v4 03/13] ARM: dts: lan966x: add missing uart DMA channel
Date:   Tue,  3 May 2022 00:41:17 +0200
Message-Id: <20220502224127.2604333-4-michael@walle.cc>
In-Reply-To: <20220502224127.2604333-1-michael@walle.cc>
References: <20220502224127.2604333-1-michael@walle.cc>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The usart node of the flexcom3 block is missing the DMA channels. Add
it.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 arch/arm/boot/dts/lan966x.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
index 4c7beebbd1ef..e9d6c16d04cf 100644
--- a/arch/arm/boot/dts/lan966x.dtsi
+++ b/arch/arm/boot/dts/lan966x.dtsi
@@ -144,6 +144,9 @@ usart3: serial@200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0x200 0x200>;
 				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
+				dma-names = "tx", "rx";
 				clocks = <&nic_clk>;
 				clock-names = "usart";
 				atmel,fifo-size = <32>;
-- 
2.30.2