Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Jiri Slaby <jslaby@suse.cz>
To:     gregkh@linuxfoundation.org
Cc:     linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
        Jiri Slaby <jslaby@suse.cz>
Subject: [PATCH 10/11] serial: pic32: free up irq names correctly
Date:   Tue,  3 May 2022 08:31:21 +0200
Message-Id: <20220503063122.20957-11-jslaby@suse.cz>
In-Reply-To: <20220503063122.20957-1-jslaby@suse.cz>
References: <20220503063122.20957-1-jslaby@suse.cz>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

struct pic32_sport contains built-up names for irqs. These are freed
only in error path of pic32_uart_startup(). And even there, the freeing
happens before free_irq().

So fix this by:
* moving frees after free_irq(), and
* add frees to pic32_uart_shutdown() -- the opposite of
  pic32_uart_startup().

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/tty/serial/pic32_uart.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c
index 990603fe8a8d..c5584628f8c4 100644
--- a/drivers/tty/serial/pic32_uart.c
+++ b/drivers/tty/serial/pic32_uart.c
@@ -569,14 +569,14 @@ static int pic32_uart_startup(struct uart_port *port)
 	return 0;
 
 out_t:
-	kfree(sport->irq_tx_name);
 	free_irq(sport->irq_tx, port);
+	kfree(sport->irq_tx_name);
 out_r:
-	kfree(sport->irq_rx_name);
 	free_irq(sport->irq_rx, port);
+	kfree(sport->irq_rx_name);
 out_f:
-	kfree(sport->irq_fault_name);
 	free_irq(sport->irq_fault, port);
+	kfree(sport->irq_fault_name);
 out_done:
 	return ret;
 }
@@ -595,8 +595,11 @@ static void pic32_uart_shutdown(struct uart_port *port)
 
 	/* free all 3 interrupts for this UART */
 	free_irq(sport->irq_fault, port);
+	kfree(sport->irq_fault_name);
 	free_irq(sport->irq_tx, port);
+	kfree(sport->irq_tx_name);
 	free_irq(sport->irq_rx, port);
+	kfree(sport->irq_rx_name);
 }
 
 /* serial core request to change current uart setting */
-- 
2.36.0