Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <4cb68dce-b334-627f-d45d-62b9a10dab6c@foss.st.com>
Date:   Tue, 3 May 2022 15:49:25 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101
 Thunderbird/91.7.0
Subject: Re: [PATCH 2/2] ARM: dts: stm32: add UserPA13 button on
 stm32mp135f-dk
Content-Language: en-US
To:     Fabien Dessenne <fabien.dessenne@foss.st.com>,
        Rob Herring <robh+dt@kernel.org>,
        Maxime Coquelin <mcoquelin.stm32@gmail.com>,
        <devicetree@vger.kernel.org>,
        <linux-stm32@st-md-mailman.stormreply.com>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>
References: <20220503094133.502487-1-fabien.dessenne@foss.st.com>
From:   Alexandre TORGUE <alexandre.torgue@foss.st.com>
In-Reply-To: <20220503094133.502487-1-fabien.dessenne@foss.st.com>
Content-Type: text/plain; charset="UTF-8"; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 5/3/22 11:41, Fabien Dessenne wrote:
> The PA13 user button is connected to the PA13 pin of the stm32mp135f-dk
> board. It requires an internal pull-up configuration.
> 
> Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
> ---
>   arch/arm/boot/dts/stm32mp135f-dk.dts | 11 +++++++++++
>   1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts
> index 65acee0f68b7..09d6226d598f 100644
> --- a/arch/arm/boot/dts/stm32mp135f-dk.dts
> +++ b/arch/arm/boot/dts/stm32mp135f-dk.dts
> @@ -7,6 +7,7 @@
>   /dts-v1/;
>   
>   #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
>   #include <dt-bindings/leds/common.h>
>   #include "stm32mp135.dtsi"
>   #include "stm32mp13xf.dtsi"
> @@ -25,6 +26,16 @@ memory@c0000000 {
>   		reg = <0xc0000000 0x20000000>;
>   	};
>   
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		user-pa13 {
> +			label = "User-PA13";
> +			linux,code = <BTN_1>;
> +			gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> +		};
> +	};
> +
>   	leds {
>   		compatible = "gpio-leds";
>   
Applied on stm32-next.

Thanks.
Alex