Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Chris Packham <chris.packham@alliedtelesis.co.nz>
To:     davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
        pabeni@redhat.com, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, atenart@kernel.org,
        thomas.petazzoni@free-electrons.com, f.fainelli@gmail.com
Cc:     netdev@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        Chris Packham <chris.packham@alliedtelesis.co.nz>
Subject: [PATCH] dt-bindings: net: orion-mdio: Convert to JSON schema
Date:   Wed,  4 May 2022 16:36:02 +1200
Message-Id: <20220504043603.949134-1-chris.packham@alliedtelesis.co.nz>
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
Precedence: bulk

Convert the marvell,orion-mdio binding to JSON schema.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
    Thomas, Antione & Florian I hope you don't mind me putting you as
    maintainers of the binding. Between you you've written the majority o=
f
    the mvmdio.c driver.
   =20
    This does throw up the following dtbs_check warnings for turris-mox:
   =20
    arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dtb: mdio@32004: s=
witch0@10:reg: [[16], [0]] is too long
            From schema: Documentation/devicetree/bindings/net/marvell,or=
ion-mdio.yaml
    arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dtb: mdio@32004: s=
witch0@2:reg: [[2], [0]] is too long
            From schema: Documentation/devicetree/bindings/net/marvell,or=
ion-mdio.yaml
    arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dtb: mdio@32004: s=
witch1@11:reg: [[17], [0]] is too long
            From schema: Documentation/devicetree/bindings/net/marvell,or=
ion-mdio.yaml
    arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dtb: mdio@32004: s=
witch1@2:reg: [[2], [0]] is too long
            From schema: Documentation/devicetree/bindings/net/marvell,or=
ion-mdio.yaml
    arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dtb: mdio@32004: s=
witch2@12:reg: [[18], [0]] is too long
            From schema: Documentation/devicetree/bindings/net/marvell,or=
ion-mdio.yaml
    arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dtb: mdio@32004: s=
witch2@2:reg: [[2], [0]] is too long
            From schema: Documentation/devicetree/bindings/net/marvell,or=
ion-mdio.yaml
   =20
    I think they're all genuine but I'm hesitant to leap in and fix them
    without being able to test them.
   =20
    I also need to set unevaluatedProperties: true to cater for the L2
    switch on turris-mox (and probably others). That might be better tack=
led
    in the core mdio.yaml schema but I wasn't planning on touching that.

 .../bindings/net/marvell,orion-mdio.yaml      | 62 +++++++++++++++++++
 .../bindings/net/marvell-orion-mdio.txt       | 54 ----------------
 2 files changed, 62 insertions(+), 54 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/marvell,orion-m=
dio.yaml
 delete mode 100644 Documentation/devicetree/bindings/net/marvell-orion-m=
dio.txt

diff --git a/Documentation/devicetree/bindings/net/marvell,orion-mdio.yam=
l b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml
new file mode 100644
index 000000000000..43cd896a0851
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,orion-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MDIO Ethernet Controller interface
+
+maintainers:
+  - Antoine Tenart <atenart@kernel.org>
+  - Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description: |
+  The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x, MV78xx=
0,
+  Armada 370, Armada XP, Armada 7k and Armada 8k have an identical unit =
that
+  provides an interface with the MDIO bus. Additionally, Armada 7k and A=
rmada
+  8k has a second unit which provides an interface with the xMDIO bus. T=
his
+  driver handles these interfaces.
+
+allOf:
+  - $ref: "mdio.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - marvell,orion-mdio
+      - marvell,xmdio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: true
+
+examples:
+  - |
+    mdio@d0072004 {
+      compatible =3D "marvell,orion-mdio";
+      reg =3D <0xd0072004 0x4>;
+      #address-cells =3D <1>;
+      #size-cells =3D <0>;
+      interrupts =3D <30>;
+
+      phy0: ethernet-phy@0 {
+        reg =3D <0>;
+      };
+
+      phy1: ethernet-phy@1 {
+        reg =3D <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt=
 b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
deleted file mode 100644
index 3f3cfc1d8d4d..000000000000
--- a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-* Marvell MDIO Ethernet Controller interface
-
-The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x,
-MV78xx0, Armada 370, Armada XP, Armada 7k and Armada 8k have an
-identical unit that provides an interface with the MDIO bus.
-Additionally, Armada 7k and Armada 8k has a second unit which
-provides an interface with the xMDIO bus. This driver handles
-these interfaces.
-
-Required properties:
-- compatible: "marvell,orion-mdio" or "marvell,xmdio"
-- reg: address and length of the MDIO registers.  When an interrupt is
-  not present, the length is the size of the SMI register (4 bytes)
-  otherwise it must be 0x84 bytes to cover the interrupt control
-  registers.
-
-Optional properties:
-- interrupts: interrupt line number for the SMI error/done interrupt
-- clocks: phandle for up to four required clocks for the MDIO instance
-
-The child nodes of the MDIO driver are the individual PHY devices
-connected to this MDIO bus. They must have a "reg" property given the
-PHY address on the MDIO bus.
-
-Example at the SoC level without an interrupt property:
-
-mdio {
-	#address-cells =3D <1>;
-	#size-cells =3D <0>;
-	compatible =3D "marvell,orion-mdio";
-	reg =3D <0xd0072004 0x4>;
-};
-
-Example with an interrupt property:
-
-mdio {
-	#address-cells =3D <1>;
-	#size-cells =3D <0>;
-	compatible =3D "marvell,orion-mdio";
-	reg =3D <0xd0072004 0x84>;
-	interrupts =3D <30>;
-};
-
-And at the board level:
-
-mdio {
-	phy0: ethernet-phy@0 {
-		reg =3D <0>;
-	};
-
-	phy1: ethernet-phy@1 {
-		reg =3D <1>;
-	};
-}
--=20
2.36.0