Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Manu Gautam <mgautam@codeaurora.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 05/13] arm64: dts: qcom: add missing AOSS QMP compatible fallback
Date:   Wed,  4 May 2022 15:19:15 +0200
Message-Id: <20220504131923.214367-6-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20220504131923.214367-1-krzysztof.kozlowski@linaro.org>
References: <20220504131923.214367-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The AOSS QMP bindings expect all compatibles to be followed by fallback
"qcom,aoss-qmp" because all of these are actually compatible with each
other.  This fixes dtbs_check warnings like:

  sm8250-hdk.dtb: power-controller@c300000: compatible: ['qcom,sm8250-aoss-qmp'] is too short

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +-
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 +-
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +-
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +-
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 86175d257b1e..925340fbbb59 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -3219,7 +3219,7 @@ aoss_reset: reset-controller@c2a0000 {
 		};
 
 		aoss_qmp: power-controller@c300000 {
-			compatible = "qcom,sc7180-aoss-qmp";
+			compatible = "qcom,sc7180-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0 0x0c300000 0 0x400>;
 			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
 			mboxes = <&apss_shared 0>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index ccf5e95071f9..e2857d3393ef 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3835,7 +3835,7 @@ aoss_reset: reset-controller@c2a0000 {
 		};
 
 		aoss_qmp: power-controller@c300000 {
-			compatible = "qcom,sc7280-aoss-qmp";
+			compatible = "qcom,sc7280-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0 0x0c300000 0 0x400>;
 			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
 						     IPCC_MPROC_SIGNAL_GLINK_QMP
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 2700a8145cb9..90a4c09e67f1 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -3710,7 +3710,7 @@ pdc: interrupt-controller@b220000 {
 		};
 
 		aoss_qmp: power-controller@c300000 {
-			compatible = "qcom,sm8150-aoss-qmp";
+			compatible = "qcom,sm8150-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0x0 0x0c300000 0x0 0x400>;
 			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
 			mboxes = <&apss_shared 0>;
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index dc2562070336..881550cf7557 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3726,7 +3726,7 @@ tsens1: thermal-sensor@c265000 {
 		};
 
 		aoss_qmp: power-controller@c300000 {
-			compatible = "qcom,sm8250-aoss-qmp";
+			compatible = "qcom,sm8250-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0 0x0c300000 0 0x400>;
 			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
 						     IPCC_MPROC_SIGNAL_GLINK_QMP
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index c0137bdcf94b..e1eba30dc7ad 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1718,7 +1718,7 @@ tsens1: thermal-sensor@c265000 {
 		};
 
 		aoss_qmp: power-controller@c300000 {
-			compatible = "qcom,sm8350-aoss-qmp";
+			compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0 0x0c300000 0 0x400>;
 			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
 						     IRQ_TYPE_EDGE_RISING>;
-- 
2.32.0