Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759393AbXEJJRv (ORCPT ); Thu, 10 May 2007 05:17:51 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1758141AbXEJJRo (ORCPT ); Thu, 10 May 2007 05:17:44 -0400 Received: from aun.it.uu.se ([130.238.12.36]:38458 "EHLO aun.it.uu.se" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756256AbXEJJRm (ORCPT ); Thu, 10 May 2007 05:17:42 -0400 X-Greylist: delayed 1138 seconds by postgrey-1.27 at vger.kernel.org; Thu, 10 May 2007 05:17:39 EDT MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <17986.56621.521038.435167@alkaid.it.uu.se> Date: Thu, 10 May 2007 10:51:57 +0200 From: Mikael Pettersson To: Gerhard Mack Cc: Jeff Garzik , linux-kernel@vger.kernel.org Subject: Re: [2.6.21.1] SATA freeze In-Reply-To: References: <464226BD.8000602@garzik.org> X-Mailer: VM 7.17 under Emacs 20.7.1 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3591 Lines: 63 Gerhard Mack writes: > On Wed, 9 May 2007, Jeff Garzik wrote: > > Gerhard Mack wrote: > > > May 9 14:51:35 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr > > > 0x1800000 action 0x2 frozen > > > May 9 14:51:35 mgerhard kernel: ata1.00: cmd > > > 35/00:00:80:6d:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out > > > May 9 14:51:35 mgerhard kernel: res > > > 40/00:c8:68:65:c8/84:00:09:00:00/e0 Emask 0x4 (timeout) > > > May 9 14:51:42 mgerhard kernel: ata1: port is slow to respond, please be > > > patient (Status 0xd0) > > > > > > Anything I can do to figgure out what's causing this? > > > > Provide full lspci, dmesg, kernel config? > > > Done. Your second boot (warm or cold?) > May 9 14:43:07 mgerhard kernel: klogd 1.4.1#20, log source = /proc/kmsg started. > May 9 14:43:07 mgerhard kernel: Linux version 2.6.21.1 (root@mgerhard) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP PREEMPT Wed May 2 20:08:35 EDT 2007 > May 9 14:43:07 mgerhard kernel: Command line: root=/dev/sda3 ro worked fine until ReiserFS's journal replay caused a single SATA exception: > May 9 14:43:07 mgerhard kernel: ReiserFS: sda3: There were 7 uncompleted unlinks/truncates. Completed > May 9 14:43:07 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2 > May 9 14:43:07 mgerhard kernel: ata1.00: (BMDMA stat 0x25) > May 9 14:43:07 mgerhard kernel: ata1.00: cmd 35/00:58:20:4d:23/00:01:00:00:00/e0 tag 0 cdb 0x0 data 176128 out > May 9 14:43:07 mgerhard kernel: res 51/84:28:50:4d:23/84:01:00:00:00/e0 Emask 0x10 (ATA bus error) > May 9 14:43:07 mgerhard kernel: ata1: soft resetting port > May 9 14:43:07 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > May 9 14:43:07 mgerhard kernel: ata1.00: configured for UDMA/100 > May 9 14:43:07 mgerhard kernel: ata1: EH complete > May 9 14:43:07 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) Shortly thereafter you loaded a proprietary module > May 9 14:43:17 mgerhard kernel: nvidia: module license 'NVIDIA' taints kernel. > May 9 14:43:17 mgerhard kernel: ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 > May 9 14:43:17 mgerhard kernel: ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16 > May 9 14:43:17 mgerhard kernel: PCI: Setting latency timer of device 0000:00:05.0 to 64 > May 9 14:43:17 mgerhard kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9746 Fri Dec 15 10:19:35 PST 2006 and immediately there's a large number of SATA exceptions: > May 9 14:44:37 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2 > May 9 14:44:37 mgerhard kernel: ata1.00: (BMDMA stat 0x25) > May 9 14:44:37 mgerhard kernel: ata1.00: cmd 35/00:00:b0:53:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out > May 9 14:44:37 mgerhard kernel: res 51/84:60:50:56:c8/84:01:09:00:00/e0 Emask 0x10 (ATA bus error) > May 9 14:44:37 mgerhard kernel: ata1: soft resetting port > May 9 14:44:37 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > May 9 14:44:37 mgerhard kernel: ata1.00: configured for UDMA/100 (repeated) Please try a cold boot (so the HW is in a pristine state) without ever loading the nvidia module. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/