Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Satya Priya <quic_c_skakit@quicinc.com>
To:     Bjorn Andersson <bjorn.andersson@linaro.org>,
        Rob Herring <robh+dt@kernel.org>
CC:     Lee Jones <lee.jones@linaro.org>,
        Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>,
        <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <swboyd@chromium.org>,
        <quic_collinsd@quicinc.com>, <quic_subbaram@quicinc.com>,
        <quic_jprakash@quicinc.com>,
        Satya Priya <quic_c_skakit@quicinc.com>
Subject: [PATCH V11 6/9] mfd: pm8008: Use i2c_new_dummy_device() API
Date:   Thu, 5 May 2022 14:55:36 +0530
Message-ID: <1651742739-12338-7-git-send-email-quic_c_skakit@quicinc.com>
In-Reply-To: <1651742739-12338-1-git-send-email-quic_c_skakit@quicinc.com>
References: <1651742739-12338-1-git-send-email-quic_c_skakit@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Use i2c_new_dummy_device() to register pm8008-regulator
client present at a different address space, instead of
defining a separate DT node. This avoids calling the probe
twice for the same chip, once for each client pm8008-infra
and pm8008-regulator.

As a part of this define pm8008_regmap_init() to do regmap
init for both the clients and define pm8008_get_regmap() to
pass the regmap to the regulator driver.

Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
---
Changes in V11:
 - Remove the for loop and register dummy directly as there are
   only 2 clients.
 - Define pm8008_regmap_init() API to do the redundant init part.

Changes in V10:
 - Implement i2c_new_dummy_device to register extra clients.

 drivers/mfd/qcom-pm8008.c       | 31 +++++++++++++++++++++++++++++--
 include/linux/mfd/qcom_pm8008.h |  8 ++++++++
 2 files changed, 37 insertions(+), 2 deletions(-)
 create mode 100644 include/linux/mfd/qcom_pm8008.h

diff --git a/drivers/mfd/qcom-pm8008.c b/drivers/mfd/qcom-pm8008.c
index 40a67f0..25e8d0b 100644
--- a/drivers/mfd/qcom-pm8008.c
+++ b/drivers/mfd/qcom-pm8008.c
@@ -57,6 +57,7 @@ enum {
 
 struct pm8008_data {
 	struct device *dev;
+	struct regmap *regulators_regmap;
 	int irq;
 	struct regmap_irq_chip_data *irq_data;
 };
@@ -150,6 +151,11 @@ static struct regmap_config qcom_mfd_regmap_cfg = {
 	.max_register	= 0xFFFF,
 };
 
+struct regmap *pm8008_get_regmap(struct pm8008_data *chip)
+{
+	return chip->regulators_regmap;
+}
+
 static int pm8008_init(struct regmap *regmap)
 {
 	int rc;
@@ -217,11 +223,25 @@ static int pm8008_probe_irq_peripherals(struct pm8008_data *chip,
 	return 0;
 }
 
+static struct regmap *pm8008_regmap_init(struct i2c_client *client,
+							struct pm8008_data *chip)
+{
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_i2c(client, &qcom_mfd_regmap_cfg);
+	if (!regmap)
+		return NULL;
+
+	i2c_set_clientdata(client, chip);
+	return regmap;
+}
+
 static int pm8008_probe(struct i2c_client *client)
 {
 	int rc;
 	struct pm8008_data *chip;
 	struct gpio_desc *reset_gpio;
+	struct i2c_client *regulators_client;
 	struct regmap *regmap;
 
 	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
@@ -229,11 +249,18 @@ static int pm8008_probe(struct i2c_client *client)
 		return -ENOMEM;
 
 	chip->dev = &client->dev;
-	regmap = devm_regmap_init_i2c(client, &qcom_mfd_regmap_cfg);
+	regmap = pm8008_regmap_init(client, chip);
 	if (!regmap)
 		return -ENODEV;
 
-	i2c_set_clientdata(client, chip);
+	regulators_client = i2c_new_dummy_device(client->adapter, client->addr + 1);
+	if (IS_ERR(regulators_client)) {
+		dev_err(&client->dev, "can't attach client\n");
+		return PTR_ERR(regulators_client);
+	}
+	chip->regulators_regmap = pm8008_regmap_init(regulators_client, chip);
+	if (!chip->regulators_regmap)
+		return -ENODEV;
 
 	if (of_property_read_bool(chip->dev->of_node, "interrupt-controller")) {
 		rc = pm8008_probe_irq_peripherals(chip, regmap, client->irq);
diff --git a/include/linux/mfd/qcom_pm8008.h b/include/linux/mfd/qcom_pm8008.h
new file mode 100644
index 0000000..e79e578
--- /dev/null
+++ b/include/linux/mfd/qcom_pm8008.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __QCOM_PM8008_H__
+#define __QCOM_PM8008_H__
+
+struct pm8008_data;
+struct regmap *pm8008_get_regmap(struct pm8008_data *chip);
+
+#endif
-- 
2.7.4