Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
To:     <agross@kernel.org>, <bjorn.andersson@linaro.org>,
        <robh+dt@kernel.org>, <linux-arm-msm@vger.kernel.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <quic_rohkumar@quicinc.com>, <srinivas.kandagatla@linaro.org>,
        <dianders@chromium.org>, <swboyd@chromium.org>,
        <judyhsiao@chromium.org>
CC:     Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>,
        "Venkata Prasad Potturu" <quic_potturu@quicinc.com>
Subject: [PATCH v14 2/4] arm64: dts: qcom: sc7280: Add secondary MI2S pinmux specifications for CRD 3.0/3.1
Date:   Thu, 5 May 2022 20:33:22 +0530
Message-ID: <1651763004-32533-3-git-send-email-quic_srivasam@quicinc.com>
In-Reply-To: <1651763004-32533-1-git-send-email-quic_srivasam@quicinc.com>
References: <1651763004-32533-1-git-send-email-quic_srivasam@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Add drive strength property for secondary MI2S on
sc7280 based platforms of rev5+ (aka CRD 3.0/3.1) boards.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
 arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
index b06f61e..deaea3a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
@@ -111,6 +111,20 @@ ap_ts_pen_1v8: &i2c13 {
  * - If a pin is not hooked up on Qcard, it gets no name.
  */
 
+&mi2s1_data0 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_sclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_ws {
+	drive-strength = <6>;
+};
+
 &pm8350c_gpios {
 	gpio-line-names = "FLASH_STROBE_1",		/* 1 */
 			  "AP_SUSPEND",
-- 
2.7.4