Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Marcel Ziswiler <marcel@ziswiler.com>
To:     linux-arm-kernel@lists.infradead.org
Cc:     Marcel Ziswiler <marcel.ziswiler@toradex.com>,
        Fabio Estevam <festevam@gmail.com>,
        Frank Rowand <frowand.list@gmail.com>,
        Krzysztof Kozlowski <krzk+dt@kernel.org>,
        NXP Linux Team <linux-imx@nxp.com>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Rob Herring <robh+dt@kernel.org>,
        Russell King <linux@armlinux.org.uk>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Shawn Guo <shawnguo@kernel.org>, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH v1 19/24] ARM: dts: imx7-colibri: clean-up device enabling/disabling
Date:   Fri,  6 May 2022 17:46:43 +0200
Message-Id: <20220506154643.297078-1-marcel@ziswiler.com>
In-Reply-To: <20220506152809.295409-1-marcel@ziswiler.com>
References: <20220506152809.295409-1-marcel@ziswiler.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Disable most nodes on module-level to be enabled on carrier board-level.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---

 arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 1 -
 arch/arm/boot/dts/imx7-colibri.dtsi         | 5 -----
 2 files changed, 6 deletions(-)

diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index fea6e4c0d4d6..826f13da5b81 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -44,7 +44,6 @@ mcp2515: can@0 {
 		spi-max-frequency = <10000000>;
 		vdd-supply = <&reg_3v3>;
 		xceiver-supply = <&reg_5v0>;
-		status = "okay";
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index f29096fca54d..065d8f55f326 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -140,9 +140,6 @@ &adc1 {
 };
 
 /* ADC2 is not available as it conflicts with AD7879 resistive touchscreen. */
-&adc2 {
-	status = "disabled";
-};
 
 &cpu0 {
 	cpu-supply = <&reg_DCDC2>;
@@ -191,13 +188,11 @@ ethphy0: ethernet-phy@0 {
 &flexcan1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "disabled";
 };
 
 &flexcan2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "disabled";
 };
 
 &gpio1 {
-- 
2.35.1