Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) client-ip=2620:137:e000::1:18;
From:   Yannick Brosseau <yannick.brosseau@gmail.com>
To:     jic23@kernel.org, lars@metafoo.de, mcoquelin.stm32@gmail.com,
        alexandre.torgue@foss.st.com, fabrice.gasnier@foss.st.com,
        olivier.moysan@foss.st.com
Cc:     paul@crapouillou.net, linux-iio@vger.kernel.org,
        linux-stm32@st-md-mailman.stormreply.com,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        Yannick Brosseau <yannick.brosseau@gmail.com>
Subject: [PATCH 1/2] iio: adc: stm32: Iterate through all ADCs in irq handler
Date:   Fri,  6 May 2022 18:56:16 -0400
Message-Id: <20220506225617.1774604-2-yannick.brosseau@gmail.com>
In-Reply-To: <20220506225617.1774604-1-yannick.brosseau@gmail.com>
References: <20220506225617.1774604-1-yannick.brosseau@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The irq handler was only checking the mask for the first ADCs in the case of the
F4 and H7 generation, since it was using the num_irq value. This patch add
the number of ADC in the common register, which map to the number of entries of
eoc_msk and ovr_msk in stm32_adc_common_regs.

Tested on a STM32F429NIH6

Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>
---
 drivers/iio/adc/stm32-adc-core.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index 142656232157..11c08c56acb0 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -64,6 +64,7 @@ struct stm32_adc_priv;
  * @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet)
  * @has_syscfg: SYSCFG capability flags
  * @num_irqs:	number of interrupt lines
+ * @num_adcs:   number of ADC instances in the common registers
  */
 struct stm32_adc_priv_cfg {
 	const struct stm32_adc_common_regs *regs;
@@ -71,6 +72,7 @@ struct stm32_adc_priv_cfg {
 	u32 max_clk_rate_hz;
 	unsigned int has_syscfg;
 	unsigned int num_irqs;
+	unsigned int num_adcs;
 };
 
 /**
@@ -352,7 +354,7 @@ static void stm32_adc_irq_handler(struct irq_desc *desc)
 	 * before invoking the interrupt handler (e.g. call ISR only for
 	 * IRQ-enabled ADCs).
 	 */
-	for (i = 0; i < priv->cfg->num_irqs; i++) {
+	for (i = 0; i < priv->cfg->num_adcs; i++) {
 		if ((status & priv->cfg->regs->eoc_msk[i] &&
 		     stm32_adc_eoc_enabled(priv, i)) ||
 		     (status & priv->cfg->regs->ovr_msk[i]))
@@ -792,6 +794,7 @@ static const struct stm32_adc_priv_cfg stm32f4_adc_priv_cfg = {
 	.clk_sel = stm32f4_adc_clk_sel,
 	.max_clk_rate_hz = 36000000,
 	.num_irqs = 1,
+	.num_adcs = 3,
 };
 
 static const struct stm32_adc_priv_cfg stm32h7_adc_priv_cfg = {
@@ -800,6 +803,7 @@ static const struct stm32_adc_priv_cfg stm32h7_adc_priv_cfg = {
 	.max_clk_rate_hz = 36000000,
 	.has_syscfg = HAS_VBOOSTER,
 	.num_irqs = 1,
+	.num_adcs = 2,
 };
 
 static const struct stm32_adc_priv_cfg stm32mp1_adc_priv_cfg = {
@@ -808,6 +812,7 @@ static const struct stm32_adc_priv_cfg stm32mp1_adc_priv_cfg = {
 	.max_clk_rate_hz = 40000000,
 	.has_syscfg = HAS_VBOOSTER | HAS_ANASWVDD,
 	.num_irqs = 2,
+	.num_adcs = 2,
 };
 
 static const struct of_device_id stm32_adc_of_match[] = {
-- 
2.36.0