Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) client-ip=2620:137:e000::1:18;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Neil Armstrong <narmstrong@baylibre.com>,
        Stephen Boyd <sboyd@codeaurora.org>,
        linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc:     Luca Weiss <luca@z3ntu.xyz>, David Heidelberg <david@ixit.cz>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 07/11] arm64: dts: qcom: apq8096-db820c: add PM8994 pin function
Date:   Sat,  7 May 2022 21:49:09 +0200
Message-Id: <20220507194913.261121-8-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20220507194913.261121-1-krzysztof.kozlowski@linaro.org>
References: <20220507194913.261121-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The bindings require that every pin configuration comes with 'function'
property.  Add such to PM8994 GPIO5.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Not tested on hardware.
---
 arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index e0e965f4dd2f..ad6780151b4f 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -558,6 +558,7 @@ &pm8994_gpios {
 	ls_exp_gpio_f: pm8994-gpio5-state {
 		pinconf {
 			pins = "gpio5";
+			function = PMIC_GPIO_FUNC_NORMAL;
 			output-low;
 			power-source = <2>; // PM8994_GPIO_S4, 1.8V
 		};
-- 
2.32.0