Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) client-ip=2620:137:e000::1:18;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Neil Armstrong <narmstrong@baylibre.com>,
        Stephen Boyd <sboyd@codeaurora.org>,
        linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc:     Luca Weiss <luca@z3ntu.xyz>, David Heidelberg <david@ixit.cz>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 06/11] arm64: dts: qcom: add fallback compatible to PMIC GPIOs
Date:   Sat,  7 May 2022 21:49:08 +0200
Message-Id: <20220507194913.261121-7-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20220507194913.261121-1-krzysztof.kozlowski@linaro.org>
References: <20220507194913.261121-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The bindings require all PMIC GPIO nodes to have two compatibles -
specific followed by SPMI or SSBI fallback.  Add the fallback to fix
warnings like:

  msm8916-samsung-serranove.dtb: gpios@c000: compatible: ['qcom,pm8916-gpio'] is too short

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/pm6350.dtsi      | 2 +-
 arch/arm64/boot/dts/qcom/pm660.dtsi       | 2 +-
 arch/arm64/boot/dts/qcom/pm8009.dtsi      | 2 +-
 arch/arm64/boot/dts/qcom/pm8150.dtsi      | 2 +-
 arch/arm64/boot/dts/qcom/pm8150b.dtsi     | 2 +-
 arch/arm64/boot/dts/qcom/pm8150l.dtsi     | 2 +-
 arch/arm64/boot/dts/qcom/pm8350.dtsi      | 2 +-
 arch/arm64/boot/dts/qcom/pm8350b.dtsi     | 2 +-
 arch/arm64/boot/dts/qcom/pm8916.dtsi      | 2 +-
 arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi | 2 +-
 arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi | 2 +-
 arch/arm64/boot/dts/qcom/pmr735b.dtsi     | 2 +-
 arch/arm64/boot/dts/qcom/pms405.dtsi      | 2 +-
 13 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/pm6350.dtsi b/arch/arm64/boot/dts/qcom/pm6350.dtsi
index c5d85064562b..f3056845e65f 100644
--- a/arch/arm64/boot/dts/qcom/pm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6350.dtsi
@@ -36,7 +36,7 @@ pm6350_resin: resin {
 		};
 
 		pm6350_gpios: gpios@c000 {
-			compatible = "qcom,pm6350-gpio";
+			compatible = "qcom,pm6350-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi
index c482663aad56..d0eefbb51663 100644
--- a/arch/arm64/boot/dts/qcom/pm660.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm660.dtsi
@@ -171,7 +171,7 @@ vcoin: vcoin@83 {
 		};
 
 		pm660_gpios: gpios@c000 {
-			compatible = "qcom,pm660-gpio";
+			compatible = "qcom,pm660-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
 			gpio-ranges = <&pm660_gpios 0 0 13>;
diff --git a/arch/arm64/boot/dts/qcom/pm8009.dtsi b/arch/arm64/boot/dts/qcom/pm8009.dtsi
index b126d7e7e4fb..d451922d2b95 100644
--- a/arch/arm64/boot/dts/qcom/pm8009.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8009.dtsi
@@ -19,7 +19,7 @@ pm8009_pon: pon@800 {
 		};
 
 		pm8009_gpios: gpio@c000 {
-			compatible = "qcom,pm8005-gpio";
+			compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index 0df76f7b1cc1..72cd93ced4c5 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -127,7 +127,7 @@ rtc@6000 {
 		};
 
 		pm8150_gpios: gpio@c000 {
-			compatible = "qcom,pm8150-gpio";
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index 058cc5107c75..28162f6fb61d 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -112,7 +112,7 @@ pm8150b_adc_tm: adc-tm@3500 {
 		};
 
 		pm8150b_gpios: gpio@c000 {
-			compatible = "qcom,pm8150b-gpio";
+			compatible = "qcom,pm8150b-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
index 52f094a2b713..0642e7d5be35 100644
--- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -100,7 +100,7 @@ pm8150l_adc_tm: adc-tm@3500 {
 		};
 
 		pm8150l_gpios: gpio@c000 {
-			compatible = "qcom,pm8150l-gpio";
+			compatible = "qcom,pm8150l-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm8350.dtsi b/arch/arm64/boot/dts/qcom/pm8350.dtsi
index b10f33afa5e3..6e91dd7a48b3 100644
--- a/arch/arm64/boot/dts/qcom/pm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8350.dtsi
@@ -45,7 +45,7 @@ pm8350_temp_alarm: temp-alarm@a00 {
 		};
 
 		pm8350_gpios: gpio@8800 {
-			compatible = "qcom,pm8350-gpio";
+			compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
 			gpio-controller;
 			#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm8350b.dtsi b/arch/arm64/boot/dts/qcom/pm8350b.dtsi
index f1d1d4c8edf8..d9512f01ed1e 100644
--- a/arch/arm64/boot/dts/qcom/pm8350b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8350b.dtsi
@@ -45,7 +45,7 @@ pm8350b_temp_alarm: temp-alarm@a00 {
 		};
 
 		pm8350b_gpios: gpio@8800 {
-			compatible = "qcom,pm8350b-gpio";
+			compatible = "qcom,pm8350b-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
 			gpio-controller;
 			#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index d58902432812..aedc0aa5602f 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -108,7 +108,7 @@ pm8916_mpps: mpps@a000 {
 		};
 
 		pm8916_gpios: gpios@c000 {
-			compatible = "qcom,pm8916-gpio";
+			compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
index 7072e5a2e73f..68e9122363ae 100644
--- a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
@@ -116,7 +116,7 @@ pmm8155au_1_rtc: rtc@6000 {
 		};
 
 		pmm8155au_1_gpios: gpio@c000 {
-			compatible = "qcom,pmm8155au-gpio";
+			compatible = "qcom,pmm8155au-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi
index 72075964fbb9..c307fc662511 100644
--- a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi
@@ -89,7 +89,7 @@ die-temp@6 {
 		};
 
 		pmm8155au_2_gpios: gpio@c000 {
-			compatible = "qcom,pmm8155au-gpio";
+			compatible = "qcom,pmm8155au-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pmr735b.dtsi b/arch/arm64/boot/dts/qcom/pmr735b.dtsi
index 604324188603..93a658eb4cdd 100644
--- a/arch/arm64/boot/dts/qcom/pmr735b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmr735b.dtsi
@@ -45,7 +45,7 @@ pmr735b_temp_alarm: temp-alarm@a00 {
 		};
 
 		pmr735b_gpios: gpio@8800 {
-			compatible = "qcom,pmr735b-gpio";
+			compatible = "qcom,pmr735b-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
 			gpio-controller;
 			#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index 98d173a377d5..43190a5cfe33 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -38,7 +38,7 @@ pms405_0: pms405@0 {
 		#size-cells = <0>;
 
 		pms405_gpios: gpio@c000 {
-			compatible = "qcom,pms405-gpio";
+			compatible = "qcom,pms405-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-- 
2.32.0