Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) client-ip=2620:137:e000::1:18;
Message-ID: <9c833e12-fd09-fe7d-d4f2-e916c6ce4524@kernel.dk>
Date:   Mon, 9 May 2022 10:09:10 -0600
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux aarch64; rv:91.0) Gecko/20100101
 Thunderbird/91.8.1
Subject: Re: [RFC PATCH] ubd: add io_uring based userspace block driver
Content-Language: en-US
To:     Ming Lei <ming.lei@redhat.com>
Cc:     linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
        io-uring@vger.kernel.org,
        Gabriel Krisman Bertazi <krisman@collabora.com>,
        ZiyangZhang <ZiyangZhang@linux.alibaba.com>,
        Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
References: <20220509092312.254354-1-ming.lei@redhat.com>
From:   Jens Axboe <axboe@kernel.dk>
In-Reply-To: <20220509092312.254354-1-ming.lei@redhat.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 5/9/22 3:23 AM, Ming Lei wrote:
> This is the driver part of userspace block driver(ubd driver), the other
> part is userspace daemon part(ubdsrv)[1].
> 
> The two parts communicate by io_uring's IORING_OP_URING_CMD with one
> shared cmd buffer for storing io command, and the buffer is read only for
> ubdsrv, each io command is indexed by io request tag directly, and
> is written by ubd driver.
> 
> For example, when one READ io request is submitted to ubd block driver, ubd
> driver stores the io command into cmd buffer first, then completes one
> IORING_OP_URING_CMD for notifying ubdsrv, and the URING_CMD is issued to
> ubd driver beforehand by ubdsrv for getting notification of any new io request,
> and each URING_CMD is associated with one io request by tag.
> 
> After ubdsrv gets the io command, it translates and handles the ubd io
> request, such as, for the ubd-loop target, ubdsrv translates the request
> into same request on another file or disk, like the kernel loop block
> driver. In ubdsrv's implementation, the io is still handled by io_uring,
> and share same ring with IORING_OP_URING_CMD command. When the target io
> request is done, the same IORING_OP_URING_CMD is issued to ubd driver for
> both committing io request result and getting future notification of new
> io request.
> 
> Another thing done by ubd driver is to copy data between kernel io
> request and ubdsrv's io buffer:
> 
> 1) before ubsrv handles WRITE request, copy the request's data into
> ubdsrv's userspace io buffer, so that ubdsrv can handle the write
> request
> 
> 2) after ubsrv handles READ request, copy ubdsrv's userspace io buffer
> into this READ request, then ubd driver can complete the READ request
> 
> Zero copy may be switched if mm is ready to support it.
> 
> ubd driver doesn't handle any logic of the specific user space driver,
> so it should be small/simple enough.

This is pretty interesting! Just one small thing I noticed, since you
want to make sure batching is Good Enough:

> +static blk_status_t ubd_queue_rq(struct blk_mq_hw_ctx *hctx,
> +		const struct blk_mq_queue_data *bd)
> +{
> +	struct ubd_queue *ubq = hctx->driver_data;
> +	struct request *rq = bd->rq;
> +	struct ubd_io *io = &ubq->ios[rq->tag];
> +	struct ubd_rq_data *data = blk_mq_rq_to_pdu(rq);
> +	blk_status_t res;
> +
> +	if (ubq->aborted)
> +		return BLK_STS_IOERR;
> +
> +	/* this io cmd slot isn't active, so have to fail this io */
> +	if (WARN_ON_ONCE(!(io->flags & UBD_IO_FLAG_ACTIVE)))
> +		return BLK_STS_IOERR;
> +
> +	/* fill iod to slot in io cmd buffer */
> +	res = ubd_setup_iod(ubq, rq);
> +	if (res != BLK_STS_OK)
> +		return BLK_STS_IOERR;
> +
> +	blk_mq_start_request(bd->rq);
> +
> +	/* mark this cmd owned by ubdsrv */
> +	io->flags |= UBD_IO_FLAG_OWNED_BY_SRV;
> +
> +	/*
> +	 * clear ACTIVE since we are done with this sqe/cmd slot
> +	 *
> +	 * We can only accept io cmd in case of being not active.
> +	 */
> +	io->flags &= ~UBD_IO_FLAG_ACTIVE;
> +
> +	/*
> +	 * run data copy in task work context for WRITE, and complete io_uring
> +	 * cmd there too.
> +	 *
> +	 * This way should improve batching, meantime pinning pages in current
> +	 * context is pretty fast.
> +	 */
> +	task_work_add(ubq->ubq_daemon, &data->work, TWA_SIGNAL);
> +
> +	return BLK_STS_OK;
> +}

It'd be better to use bd->last to indicate what kind of signaling you
need here. TWA_SIGNAL will force an immediate transition if the app is
running in userspace, which may not be what you want. Also see:

https://git.kernel.dk/cgit/linux-block/commit/?h=for-5.19/io_uring&id=e788be95a57a9bebe446878ce9bf2750f6fe4974

But regardless of signaling needed, you don't need it except if bd->last
is true. Would need a commit_rqs() as well, but that's trivial.

More importantly, what prevents ubq->ubq_daemon from going away after
it's been assigned? I didn't look at the details, but is this relying on
io_uring being closed to cancel pending requests? That should work, but
we need some way to ensure that ->ubq_daemon is always valid here.

-- 
Jens Axboe