Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Robert Marko <robert.marko@sartura.hr>
To:     robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
        andrew@lunn.ch, gregory.clement@bootlin.com,
        sebastian.hesselbarth@gmail.com, kostap@marvell.com,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, pali@kernel.org,
        marek.behun@nic.cz
Cc:     Robert Marko <robert.marko@sartura.hr>
Subject: [PATCH v2 06/11] arm64: dts: marvell: uDPU: align LED-s with bindings
Date:   Tue, 10 May 2022 14:49:24 +0200
Message-Id: <20220510124929.91000-6-robert.marko@sartura.hr>
In-Reply-To: <20220510124929.91000-1-robert.marko@sartura.hr>
References: <20220510124929.91000-1-robert.marko@sartura.hr>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

According to bindings they LED-s should be prefixed with "led" in this
use case, so fix accordingly.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
---
 arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
index 4ae1688e6627..f216777acacc 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -31,32 +31,32 @@ leds {
 		pinctrl-names = "default";
 		compatible = "gpio-leds";
 
-		power1 {
+		led-power1 {
 			label = "udpu:green:power";
 			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
 		};
 
-		power2 {
+		led-power2 {
 			label = "udpu:red:power";
 			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
 		};
 
-		network1 {
+		led-network1 {
 			label = "udpu:green:network";
 			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
 		};
 
-		network2 {
+		led-network2 {
 			label = "udpu:red:network";
 			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
 		};
 
-		alarm1 {
+		led-alarm1 {
 			label = "udpu:green:alarm";
 			gpios = <&gpionb 15 GPIO_ACTIVE_LOW>;
 		};
 
-		alarm2 {
+		led-alarm2 {
 			label = "udpu:red:alarm";
 			gpios = <&gpionb 16 GPIO_ACTIVE_LOW>;
 		};
-- 
2.36.1