Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Tue, 10 May 2022 13:07:16 -0500
From:   Rob Herring <robh@kernel.org>
To:     Puranjay Mohan <p-mohan@ti.com>
Cc:     linux-kernel@vger.kernel.org, davem@davemloft.net,
        edumazet@google.com, krzysztof.kozlowski+dt@linaro.org,
        netdev@vger.kernel.org, devicetree@vger.kernel.org, nm@ti.com,
        ssantosh@kernel.org, s-anna@ti.com,
        linux-arm-kernel@lists.infradead.org, rogerq@kernel.org,
        grygorii.strashko@ti.com, vigneshr@ti.com, kishon@ti.com,
        afd@ti.com, andrew@lunn.ch
Subject: Re: [PATCH 1/2] dt-bindings: net: Add ICSSG Ethernet Driver bindings
Message-ID: <Ynqp1LhWWtXjA8kT@robh.at.kernel.org>
References: <20220506052433.28087-1-p-mohan@ti.com>
 <20220506052433.28087-2-p-mohan@ti.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20220506052433.28087-2-p-mohan@ti.com>
Precedence: bulk

On Fri, May 06, 2022 at 10:54:32AM +0530, Puranjay Mohan wrote:
> Add a YAML binding document for the ICSSG Programmable real time unit
> based Ethernet driver. This driver uses the PRU and PRUSS consumer APIs
> to interface the PRUs and load/run the firmware for supporting ethernet
> functionality.
> 
> Signed-off-by: Puranjay Mohan <p-mohan@ti.com>
> ---
>  .../bindings/net/ti,icssg-prueth.yaml         | 174 ++++++++++++++++++
>  1 file changed, 174 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
> new file mode 100644
> index 000000000000..ca6f0af411cf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
> @@ -0,0 +1,174 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/ti,icssg-prueth.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: |+
> +  Texas Instruments ICSSG PRUSS Ethernet
> +
> +maintainers:
> +  - Puranjay Mohan <p-mohan@ti.com>
> +
> +description: |+

Don't need '|+'

> +  Ethernet based on the Programmable Real-Time Unit and Industrial Communication Subsystem.

Wrap the line at 80.

> +
> +allOf:
> +  - $ref: /schemas/remoteproc/ti,pru-consumer.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ti,am654-icssg-prueth  # for AM65x SoC family
> +
> +  sram:
> +    description: |
> +      phandle to MSMC SRAM node
> +
> +  dmas:
> +    minItems: 10
> +    maxItems: 10

Just maxItems is enough.

> +    description: |
> +      list of phandles and specifiers to UDMA as specified in bindings/dma/ti/k3-udma.txt.

Drop. First, we don't want new references to .txt files. Second, the 
specific provider is generally outside the scope of a binding.

> +
> +  dma-names:
> +    items:
> +      - const: tx0-0
> +      - const: tx0-1
> +      - const: tx0-2
> +      - const: tx0-3
> +      - const: tx1-0
> +      - const: tx1-1
> +      - const: tx1-2
> +      - const: tx1-3
> +      - const: rx0
> +      - const: rx1
> +
> +  ethernet-ports:
> +    type: object
> +    properties:
> +      '#address-cells':
> +        const: 1
> +      '#size-cells':
> +        const: 0
> +
> +    patternProperties:
> +      ^port@[0-1]$:

ethernet-port is preferred.

> +        type: object
> +        description: ICSSG PRUETH external ports
> +
> +        $ref: ethernet-controller.yaml#

           unevaluatedProperties: false

> +
> +        properties:
> +          reg:
> +            items:
> +              - enum: [0, 1]
> +            description: ICSSG PRUETH port number
> +
> +          ti,syscon-rgmii-delay:
> +            $ref: /schemas/types.yaml#/definitions/phandle-array
> +            description:
> +              phandle to system controller node and register offset
> +              to ICSSG control register for RGMII transmit delay
> +
> +        required:
> +          - reg
> +
> +    additionalProperties: false

For indented cases, I think it is easier to read if this is above 
'properties'.

> +
> +  ti,mii-g-rt:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: |
> +      phandle to MII_G_RT module's syscon regmap.
> +
> +  ti,mii-rt:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: |
> +      phandle to MII_RT module's syscon regmap
> +
> +  interrupts:
> +    minItems: 2
> +    maxItems: 2
> +    description: |
> +      Interrupt specifiers to TX timestamp IRQ.
> +
> +  interrupt-names:
> +    items:
> +      - const: tx_ts0
> +      - const: tx_ts1
> +
> +required:
> +  - compatible
> +  - sram
> +  - ti,mii-g-rt
> +  - dmas
> +  - dma-names
> +  - ethernet-ports
> +  - interrupts
> +  - interrupt-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +
> +    /* Example k3-am654 base board SR2.0, dual-emac */
> +        pruss2_eth: pruss2_eth {

Indentation here should be 4.

> +                compatible = "ti,am654-icssg-prueth";
> +                pinctrl-names = "default";
> +                pinctrl-0 = <&icssg2_rgmii_pins_default>;
> +                sram = <&msmc_ram>;
> +
> +                ti,prus = <&pru2_0>, <&rtu2_0>, <&tx_pru2_0>, <&pru2_1>, <&rtu2_1>, <&tx_pru2_1>;

Required?

You should also list this in properties and define how many entries.

> +                firmware-name = "ti-pruss/am65x-pru0-prueth-fw.elf",
> +                                "ti-pruss/am65x-rtu0-prueth-fw.elf",
> +                                "ti-pruss/am65x-txpru0-prueth-fw.elf",
> +                                "ti-pruss/am65x-pru1-prueth-fw.elf",
> +                                "ti-pruss/am65x-rtu1-prueth-fw.elf",
> +                                "ti-pruss/am65x-txpru1-prueth-fw.elf";
> +                ti,pruss-gp-mux-sel = <2>,      /* MII mode */
> +                                      <2>,
> +                                      <2>,
> +                                      <2>,      /* MII mode */
> +                                      <2>,
> +                                      <2>;
> +                ti,mii-g-rt = <&icssg2_mii_g_rt>;
> +                dmas = <&main_udmap 0xc300>, /* egress slice 0 */
> +                       <&main_udmap 0xc301>, /* egress slice 0 */
> +                       <&main_udmap 0xc302>, /* egress slice 0 */
> +                       <&main_udmap 0xc303>, /* egress slice 0 */
> +                       <&main_udmap 0xc304>, /* egress slice 1 */
> +                       <&main_udmap 0xc305>, /* egress slice 1 */
> +                       <&main_udmap 0xc306>, /* egress slice 1 */
> +                       <&main_udmap 0xc307>, /* egress slice 1 */
> +                       <&main_udmap 0x4300>, /* ingress slice 0 */
> +                       <&main_udmap 0x4301>; /* ingress slice 1 */
> +                dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
> +                            "tx1-0", "tx1-1", "tx1-2", "tx1-3",
> +                            "rx0", "rx1";
> +                interrupts = <24 0 2>, <25 1 3>;
> +                interrupt-names = "tx_ts0", "tx_ts1";
> +                ethernet-ports {
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +                        pruss2_emac0: port@0 {
> +                                reg = <0>;
> +                                phy-handle = <&pruss2_eth0_phy>;
> +                                phy-mode = "rgmii-rxid";
> +                                interrupts-extended = <&icssg2_intc 24>;
> +                                ti,syscon-rgmii-delay = <&scm_conf 0x4120>;
> +                                /* Filled in by bootloader */
> +                                local-mac-address = [00 00 00 00 00 00];
> +                        };
> +
> +                        pruss2_emac1: port@1 {
> +                                reg = <1>;
> +                                phy-handle = <&pruss2_eth1_phy>;
> +                                phy-mode = "rgmii-rxid";
> +                                interrupts-extended = <&icssg2_intc 25>;
> +                                ti,syscon-rgmii-delay = <&scm_conf 0x4124>;
> +                                /* Filled in by bootloader */
> +                                local-mac-address = [00 00 00 00 00 00];
> +                        };
> +                };
> +        };
> -- 
> 2.17.1
> 
>