Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1763622AbXEKTsu (ORCPT ); Fri, 11 May 2007 15:48:50 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S933640AbXEKTnT (ORCPT ); Fri, 11 May 2007 15:43:19 -0400 Received: from proxima.lp0.eu ([85.158.45.36]:45976 "EHLO proxima.lp0.eu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933673AbXEKTnQ (ORCPT ); Fri, 11 May 2007 15:43:16 -0400 Message-ID: <4644C750.2030300@simon.arlott.org.uk> Date: Fri, 11 May 2007 20:43:12 +0100 From: Simon Arlott User-Agent: Thunderbird 1.5.0.5 (X11/20060819) MIME-Version: 1.0 To: Linux Kernel Mailing List , trivial@kernel.org Subject: [PATCH] spelling fixes: arch/sh/ X-Enigmail-Version: 0.94.1.2 OpenPGP: id=89C93563 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 14995 Lines: 348 Spelling fixes in arch/sh/. Signed-off-by: Simon Arlott --- arch/sh/boards/landisk/gio.c | 2 +- arch/sh/boards/snapgear/rtc.c | 2 +- arch/sh/boards/superh/microdev/io.c | 6 +++--- arch/sh/boards/superh/microdev/irq.c | 6 +++--- arch/sh/boards/superh/microdev/setup.c | 2 +- arch/sh/boards/unknown/setup.c | 2 +- arch/sh/drivers/dma/dma-api.c | 2 +- arch/sh/drivers/dma/dma-isa.c | 2 +- arch/sh/drivers/dma/dmabrg.c | 2 +- arch/sh/drivers/pci/ops-dreamcast.c | 2 +- arch/sh/drivers/pci/pci-st40.c | 6 +++--- arch/sh/drivers/pci/pci-st40.h | 2 +- arch/sh/drivers/superhyway/ops-sh4-202.c | 2 +- arch/sh/kernel/cf-enabler.c | 2 +- arch/sh/kernel/cpu/irq/maskreg.c | 2 +- arch/sh/kernel/cpu/sh4/fpu.c | 2 +- arch/sh/kernel/kgdb_stub.c | 4 ++-- arch/sh/kernel/traps.c | 2 +- arch/sh/math-emu/math.c | 2 +- arch/sh/mm/init.c | 2 +- 20 files changed, 27 insertions(+), 27 deletions(-) diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/landisk/gio.c index 50d38be..a37643d 100644 --- a/arch/sh/boards/landisk/gio.c +++ b/arch/sh/boards/landisk/gio.c @@ -69,7 +69,7 @@ static int gio_ioctl(struct inode *inode, struct file *filp, } switch (cmd) { - case GIODRV_IOCSGIOSETADDR: /* addres set */ + case GIODRV_IOCSGIOSETADDR: /* address set */ addr = data; break; diff --git a/arch/sh/boards/snapgear/rtc.c b/arch/sh/boards/snapgear/rtc.c index 1659fdd..edb3dd9 100644 --- a/arch/sh/boards/snapgear/rtc.c +++ b/arch/sh/boards/snapgear/rtc.c @@ -108,7 +108,7 @@ static void ds1302_writebyte(unsigned int addr, unsigned int val) static void ds1302_reset(void) { unsigned long flags; - /* Hardware dependant reset/init */ + /* Hardware dependent reset/init */ local_irq_save(flags); set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK); set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); diff --git a/arch/sh/boards/superh/microdev/io.c b/arch/sh/boards/superh/microdev/io.c index 83419bf..b704e20 100644 --- a/arch/sh/boards/superh/microdev/io.c +++ b/arch/sh/boards/superh/microdev/io.c @@ -198,12 +198,12 @@ void microdev_outb(unsigned char b, unsigned long port) /* * There is a board feature with the current SH4-202 MicroDev in * that the 2 byte enables (nBE0 and nBE1) are tied together (and - * to the Chip Select Line (Ethernet_CS)). Due to this conectivity, + * to the Chip Select Line (Ethernet_CS)). Due to this connectivity, * it is not possible to safely perform 8-bit writes to the * Ethernet registers, as 16-bits will be consumed from the Data * lines (corrupting the other byte). Hence, this function is - * written to impliment 16-bit read/modify/write for all byte-wide - * acceses. + * written to implement 16-bit read/modify/write for all byte-wide + * accesses. * * Note: there is no problem with byte READS (even or odd). * diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/superh/microdev/irq.c index 8c64baa..cc1cb04 100644 --- a/arch/sh/boards/superh/microdev/irq.c +++ b/arch/sh/boards/superh/microdev/irq.c @@ -100,7 +100,7 @@ static void disable_microdev_irq(unsigned int irq) fpgaIrq = fpgaIrqTable[irq].fpgaIrq; - /* disable interupts on the FPGA INTC register */ + /* disable interrupts on the FPGA INTC register */ ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG); } @@ -125,7 +125,7 @@ static void enable_microdev_irq(unsigned int irq) priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri); ctrl_outl(priorities, priorityReg); - /* enable interupts on the FPGA INTC register */ + /* enable interrupts on the FPGA INTC register */ ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG); } @@ -152,7 +152,7 @@ extern void __init init_microdev_irq(void) { int i; - /* disable interupts on the FPGA INTC register */ + /* disable interrupts on the FPGA INTC register */ ctrl_outl(~0ul, MICRODEV_FPGA_INTDSB_REG); for (i = 0; i < NUM_EXTERNAL_IRQS; i++) diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/superh/microdev/setup.c index 031c814..6396cea 100644 --- a/arch/sh/boards/superh/microdev/setup.c +++ b/arch/sh/boards/superh/microdev/setup.c @@ -349,7 +349,7 @@ static int __init smsc_superio_setup(void) SMSC_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */ SMSC_WRITE_INDEXED(0x08, 0xe8); /* GP20 = nIDE2_OE */ - /* Exit the configuraton state */ + /* Exit the configuration state */ outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); return 0; diff --git a/arch/sh/boards/unknown/setup.c b/arch/sh/boards/unknown/setup.c index 1c94137..bee4612 100644 --- a/arch/sh/boards/unknown/setup.c +++ b/arch/sh/boards/unknown/setup.c @@ -6,7 +6,7 @@ * May be copied or modified under the terms of the GNU General Public * License. See linux/COPYING for more information. * - * Setup code for an unknown machine (internal peripherials only) + * Setup code for an unknown machine (internal peripherals only) * * This is the simplest of all boards, and serves only as a quick and dirty * method to start debugging a new board during bring-up until proper board diff --git a/arch/sh/drivers/dma/dma-api.c b/arch/sh/drivers/dma/dma-api.c index e062067..8057a27 100644 --- a/arch/sh/drivers/dma/dma-api.c +++ b/arch/sh/drivers/dma/dma-api.c @@ -115,7 +115,7 @@ static int search_cap(const char **haystack, const char *needle) /** * request_dma_bycap - Allocate a DMA channel based on its capabilities * @dmac: List of DMA controllers to search - * @caps: List of capabilites + * @caps: List of capabilities * * Search all channels of all DMA controllers to find a channel which * matches the requested capabilities. The result is the channel diff --git a/arch/sh/drivers/dma/dma-isa.c b/arch/sh/drivers/dma/dma-isa.c index 05a74ff..5fb044b 100644 --- a/arch/sh/drivers/dma/dma-isa.c +++ b/arch/sh/drivers/dma/dma-isa.c @@ -28,7 +28,7 @@ * NOTE: ops->xfer() is the preferred way of doing things. However, there * are some users of the ISA DMA API that exist in common code that we * don't necessarily want to go out of our way to break, so we still - * allow for some compatability at that level. Any new code is strongly + * allow for some compatibility at that level. Any new code is strongly * advised to run far away from the ISA DMA API and use the SH DMA API * directly. */ diff --git a/arch/sh/drivers/dma/dmabrg.c b/arch/sh/drivers/dma/dmabrg.c index 9d0a293..5e22689 100644 --- a/arch/sh/drivers/dma/dmabrg.c +++ b/arch/sh/drivers/dma/dmabrg.c @@ -33,7 +33,7 @@ * 9 | HAC1/SSI1 | rec | half done | DMABRGI2 * * all can be enabled/disabled in the DMABRGCR register, - * as well as checked if they occured. + * as well as checked if they occurred. * * DMABRGI0 services USB DMA Address errors, but it still must be * enabled/acked in the DMABRGCR register. USB-DMA complete indicator diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c index 381306c..e1284fc 100644 --- a/arch/sh/drivers/pci/ops-dreamcast.c +++ b/arch/sh/drivers/pci/ops-dreamcast.c @@ -57,7 +57,7 @@ struct pci_channel board_pci_channels[] = { * * Also, we could very easily support both Type 0 and Type 1 configurations * here, but since it doesn't seem that there is any such implementation in - * existance, we don't bother. + * existence, we don't bother. * * I suppose if someone actually gets around to ripping the chip out of * the BBA and hanging some more devices off of it, then this might be diff --git a/arch/sh/drivers/pci/pci-st40.c b/arch/sh/drivers/pci/pci-st40.c index d67656a..543417f 100644 --- a/arch/sh/drivers/pci/pci-st40.c +++ b/arch/sh/drivers/pci/pci-st40.c @@ -292,7 +292,7 @@ int __init st40pci_init(unsigned memStart, unsigned memSize) PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_IO); - /* Accesse to the 0xb0000000 -> 0xb6000000 area will go through to 0x10000000 -> 0x16000000 + /* Access to the 0xb0000000 -> 0xb6000000 area will go through to 0x10000000 -> 0x16000000 * on the PCI bus. This allows a nice 1-1 bus to phys mapping. */ @@ -315,7 +315,7 @@ int __init st40pci_init(unsigned memStart, unsigned memSize) ST40PCI_WRITE(CSR_MBAR0, 0); ST40PCI_WRITE(LSR0, 0x0fff0001); - /* ... and set up the initial incomming window to expose all of RAM */ + /* ... and set up the initial incoming window to expose all of RAM */ pci_set_rbar_region(7, memStart, memStart, memSize); /* Maximise timeout values */ @@ -473,7 +473,7 @@ static void pci_set_rbar_region(unsigned int region, unsigned long localAddr mask = r2p2(regionSize) - 0x10000; - /* Diable the region (in case currently in use, should never happen) */ + /* Disable the region (in case currently in use, should never happen) */ ST40PCI_WRITE_INDEXED(RSR, region, 0); /* Start of local address space to publish */ diff --git a/arch/sh/drivers/pci/pci-st40.h b/arch/sh/drivers/pci/pci-st40.h index d729e0c..cf0d35b 100644 --- a/arch/sh/drivers/pci/pci-st40.h +++ b/arch/sh/drivers/pci/pci-st40.h @@ -4,7 +4,7 @@ * May be copied or modified under the terms of the GNU General Public * License. See linux/COPYING for more information. * - * Defintions for the ST40 PCI hardware. + * Definitions for the ST40 PCI hardware. */ #ifndef __PCI_ST40_H__ diff --git a/arch/sh/drivers/superhyway/ops-sh4-202.c b/arch/sh/drivers/superhyway/ops-sh4-202.c index a55c98a..3b14bf8 100644 --- a/arch/sh/drivers/superhyway/ops-sh4-202.c +++ b/arch/sh/drivers/superhyway/ops-sh4-202.c @@ -130,7 +130,7 @@ static int sh4202_read_vcr(unsigned long base, struct superhyway_vcr_info *vcr) * Some modules (PBR and ePBR for instance) also appear to have * VCRL/VCRH flipped in the documentation, but on the SH4-202 * itself it appears that these are all consistently mapped with - * VCRH preceeding VCRL. + * VCRH preceding VCRL. * * Do not trust the documentation, for it is evil. */ diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c index 0758d48..849a9e1 100644 --- a/arch/sh/kernel/cf-enabler.c +++ b/arch/sh/kernel/cf-enabler.c @@ -31,7 +31,7 @@ */ #if defined(CONFIG_CPU_SH4) /* SH4 can't access PCMCIA interface through P2 area. - * we must remap it with appropreate attribute bit of the page set. + * we must remap it with appropriate attribute bit of the page set. * this part is based on Greg Banks' hd64465_ss.c implementation - Masahiro Abe */ #if defined(CONFIG_CF_AREA6) diff --git a/arch/sh/kernel/cpu/irq/maskreg.c b/arch/sh/kernel/cpu/irq/maskreg.c index 492db31..978992e 100644 --- a/arch/sh/kernel/cpu/irq/maskreg.c +++ b/arch/sh/kernel/cpu/irq/maskreg.c @@ -38,7 +38,7 @@ static struct hw_interrupt_type maskreg_irq_type = { .end = end_maskreg_irq }; -/* actual implementatin */ +/* actual implementation */ static unsigned int startup_maskreg_irq(unsigned int irq) { enable_maskreg_irq(irq); diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c index d61dd59..c5a4fc7 100644 --- a/arch/sh/kernel/cpu/sh4/fpu.c +++ b/arch/sh/kernel/cpu/sh4/fpu.c @@ -138,7 +138,7 @@ restore_fpu(struct task_struct *tsk) /* * Load the FPU with signalling NANS. This bit pattern we're using * has the property that no matter wether considered as single or as - * double precission represents signaling NANS. + * double precision represents signaling NANS. */ static void diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c index a532336..edd1ec2 100644 --- a/arch/sh/kernel/kgdb_stub.c +++ b/arch/sh/kernel/kgdb_stub.c @@ -2,7 +2,7 @@ * May be copied or modified under the terms of the GNU General Public * License. See linux/COPYING for more information. * - * Containes extracts from code by Glenn Engel, Jim Kingdon, + * Contains extracts from code by Glenn Engel, Jim Kingdon, * David Grothe , Tigran Aivazian , * Amit S. Kale , William Gatliff , * Ben Lee, Steve Chamberlain and Benoit Miller . @@ -85,7 +85,7 @@ * * Responses can be run-length encoded to save space. A '*' means that * the next character is an ASCII encoding giving a repeat count which - * stands for that many repititions of the character preceding the '*'. + * stands for that many repetitions of the character preceding the '*'. * The encoding is n+29, yielding a printable character where n >=3 * (which is where RLE starts to win). Don't use an n > 126. * diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index 3a19764..a01e367 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -513,7 +513,7 @@ static int handle_unaligned_access(u16 instruction, struct pt_regs *regs) * misaligned data access * access to >= 0x80000000 is user mode * Unfortuntaly we can't distinguish between instruction address error - * and data address errors caused by read acceses. + * and data address errors caused by read accesses. */ asmlinkage void do_address_error(struct pt_regs *regs, unsigned long writeaccess, diff --git a/arch/sh/math-emu/math.c b/arch/sh/math-emu/math.c index 1efbac1..a38e1ee 100644 --- a/arch/sh/math-emu/math.c +++ b/arch/sh/math-emu/math.c @@ -148,7 +148,7 @@ fmac(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n) return 0; } -// to process fmov's extention (odd n for DR access XD). +// to process fmov's extension (odd n for DR access XD). #define FMOV_EXT(x) if(x&1) x+=16-1 static int diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 8fe223a..2bb0d86 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -112,7 +112,7 @@ static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot) * As a performance optimization, other platforms preserve the fixmap mapping * across a context switch, we don't presently do this, but this could be done * in a similar fashion as to the wired TLB interface that sh64 uses (by way - * of the memorry mapped UTLB configuration) -- this unfortunately forces us to + * of the memory mapped UTLB configuration) -- this unfortunately forces us to * give up a TLB entry for each mapping we want to preserve. While this may be * viable for a small number of fixmaps, it's not particularly useful for * everything and needs to be carefully evaluated. (ie, we may want this for -- 1.5.0.1 -- Simon Arlott - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/