Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Thu, 12 May 2022 18:05:02 +0300
From:   Serge Semin <fancer.lancer@gmail.com>
To:     Hannes Reinecke <hare@suse.de>
Cc:     Serge Semin <Sergey.Semin@baikalelectronics.ru>,
        Damien Le Moal <damien.lemoal@opensource.wdc.com>,
        Hans de Goede <hdegoede@redhat.com>,
        Jens Axboe <axboe@kernel.dk>,
        Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>,
        Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>,
        Rob Herring <robh+dt@kernel.org>, linux-ide@vger.kernel.org,
        linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v3 13/23] ata: libahci: Extend port-cmd flags set with
 port capabilities
Message-ID: <20220512150502.l6gmh3d4uosmvxwg@mobilestation>
References: <20220511231810.4928-1-Sergey.Semin@baikalelectronics.ru>
 <20220511231810.4928-14-Sergey.Semin@baikalelectronics.ru>
 <7fd1c122-12b2-adff-856f-50ffc5fc6bd1@suse.de>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <7fd1c122-12b2-adff-856f-50ffc5fc6bd1@suse.de>
Precedence: bulk

On Thu, May 12, 2022 at 08:57:55AM +0200, Hannes Reinecke wrote:
> On 5/12/22 01:18, Serge Semin wrote:
> > Currently not all of the Port-specific capabilities listed in the
> > PORT_CMD-enumeration. Let's extend that set with the Cold Presence
> > Detection and Mechanical Presence Switch attached to the Port flags [1] so
> > to closeup the set of the platform-specific port-capabilities flags.  Note
> > these flags are supposed to be set by the platform firmware if there is
> > one. Alternatively as we are about to do they can be set by means of the
> > OF properties.
> > 
> > While at it replace PORT_IRQ_DEV_ILCK with PORT_IRQ_DEV_MPS and fix the
> > comment there. In accordance with [2] that IRQ flag is supposed to
> > indicate the state of the signal coming from the Mechanical Presence
> > Switch.
> > 
> > [1] Serial ATA AHCI 1.3.1 Specification, p.27
> > [2] Serial ATA AHCI 1.3.1 Specification, p.7
> > 
> > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> > ---
> >   drivers/ata/ahci.h | 7 ++++++-
> >   1 file changed, 6 insertions(+), 1 deletion(-)
> > 

> You might want to adapt the subject line, as this patch doesn't touch
> libahci at all.

AFAICS ahci.h is mainly (if not to say only) the header file of the
libahci.c module interface. Modifying ahci.h I basically update the
libahci interface. So based on that the subject is fully correct.

> Other than that:
> 
> Reviewed-by: Hannes Reinecke <hare@suse.de>

Thanks.

-Sergey

> 
> Cheers,
> 
> Hannes
> -- 
> Dr. Hannes Reinecke		           Kernel Storage Architect
> hare@suse.de			                  +49 911 74053 688
> SUSE Software Solutions Germany GmbH, Maxfeldstr. 5, 90409 N?rnberg
> HRB 36809 (AG N?rnberg), GF: Felix Imend?rffer