Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
From:   =?UTF-8?q?=E5=91=A8=E7=90=B0=E6=9D=B0=20=28Zhou=20Yanjie=29?= 
        <zhouyanjie@wanyeetech.com>
To:     tsbogend@alpha.franken.de, paul@crapouillou.net,
        robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org
Cc:     linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
        linux-mips@vger.kernel.org, dongsheng.qiu@ingenic.com,
        aric.pzqi@ingenic.com, rick.tyliu@ingenic.com
Subject: [PATCH 0/3] Refresh device tree and defconfig for Ingenic SoCs and boards.
Date:   Fri, 13 May 2022 03:33:38 +0800
Message-Id: <1652384021-46309-1-git-send-email-zhouyanjie@wanyeetech.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

1.Add PWM node for X1830 SoC from Ingenic.
2.Add SSI nodes for X1000 SoC and X1830 SoC from Ingenic.
3.Refresh SSI related nodes in CU1000-Neo and CU1830-Neo.
4.The X1830 SoC used by the CU1830-Neo and the X1000 SoC
  used by the CU1000-Neo are both single-core processors,
  therefore the "OST_CLK_PERCPU_TIMER" ABI should not be
  used in the OST nodes of the CU1830-Neo and CU1000-Neo,
  it is just a coincidence that there is no problem now.
  So replace the misused "OST_CLK_PERCPU_TIMER" ABI with
  the correct "OST_CLK_EVENT_TIMER" ABI.
5.Refresh the defconfig files of the CU1000-Neo board and
  the CU1830-Neo board, remove the selection of SPI-GPIO,
  and add the selection of SSI.

周琰杰 (Zhou Yanjie) (3):
  MIPS: Ingenic: Add PWM nodes for X1830.
  MIPS: Ingenic: Refresh device tree for Ingenic SoCs and boards.
  MIPS: Ingenic: Refresh defconfig for CU1000-Neo and CU1830-Neo.

 arch/mips/boot/dts/ingenic/cu1000-neo.dts | 77 ++++++++++++++++---------------
 arch/mips/boot/dts/ingenic/cu1830-neo.dts | 76 +++++++++++++++---------------
 arch/mips/boot/dts/ingenic/x1000.dtsi     | 20 ++++++++
 arch/mips/boot/dts/ingenic/x1830.dtsi     | 53 +++++++++++++++++++++
 arch/mips/configs/cu1000-neo_defconfig    |  2 +-
 arch/mips/configs/cu1830-neo_defconfig    |  2 +-
 6 files changed, 154 insertions(+), 76 deletions(-)

-- 
2.7.4