Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
From:   Caleb Connolly <caleb.connolly@linaro.org>
To:     Sebastian Reichel <sre@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Caleb Connolly <caleb.connolly@linaro.org>,
        linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
        phone-devel@vger.kernel.org
Subject: [PATCH v3 2/6] arm64: dts: qcom: pmi8998: add charger node
Date:   Fri, 13 May 2022 21:05:08 +0100
Message-Id: <20220513200512.501156-3-caleb.connolly@linaro.org>
In-Reply-To: <20220513200512.501156-1-caleb.connolly@linaro.org>
References: <20220513200512.501156-1-caleb.connolly@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add a node for the smb2 charger hardware found on the pmi8998.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
---
 arch/arm64/boot/dts/qcom/pmi8998.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index da10668c361d..962a8719b07a 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -9,6 +9,23 @@ pmi8998_lsid0: pmic@2 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmi8998_charger: charger@1000 {
+			compatible = "qcom,pmi8998-charger";
+			reg = <0x1000>;
+
+			interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
+				     <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "usb-plugin", "bat-ov", "wdog-bark", "usbin-icl-change";
+
+			io-channels = <&pmi8998_rradc 3>,
+				      <&pmi8998_rradc 4>;
+			io-channel-names = "usbin_i", "usbin_v";
+
+			status = "disabled";
+		};
+
 		pmi8998_gpio: gpios@c000 {
 			compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
-- 
2.36.1