Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
From:   Marijn Suijten <marijn.suijten@somainline.org>
To:     phone-devel@vger.kernel.org, Pavel Machek <pavel@ucw.cz>,
        Bjorn Andersson <bjorn.andersson@linaro.org>
Cc:     ~postmarketos/upstreaming@lists.sr.ht,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@somainline.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Martin Botka <martin.botka@somainline.org>,
        Marijn Suijten <marijn.suijten@somainline.org>,
        linux-arm-msm@vger.kernel.org, linux-leds@vger.kernel.org,
        Rob Herring <robh@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        Andy Gross <agross@kernel.org>
Subject: [PATCH v3 3/4] arm64: dts: qcom: pm660l: Add LPG node
Date:   Wed, 11 May 2022 21:07:17 +0200
Message-Id: <20220511190718.764445-3-marijn.suijten@somainline.org>
In-Reply-To: <20220511190718.764445-1-marijn.suijten@somainline.org>
References: <20220511190718.764445-1-marijn.suijten@somainline.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The Light Pulse Generator describes a hardware block responsible for
displaying colors and patterns on an RGB LED (usually used for [battery]
status and notifications), and drive PWM signals for general-purpose
(ie. backlight) LEDs.  The availability and usage of the individual
channels differ per board and is hence left for individual platform DTs
to configure.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 arch/arm64/boot/dts/qcom/pm660l.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi
index cfef42353611..636b8d398d96 100644
--- a/arch/arm64/boot/dts/qcom/pm660l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi
@@ -65,6 +65,15 @@ pmic@3 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm660l_lpg: lpg@b100 {
+			compatible = "qcom,pm660l-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		pm660l_wled: leds@d800 {
 			compatible = "qcom,pm660l-wled";
 			reg = <0xd800 0xd900>;
-- 
2.36.1