Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Wed, 28 Nov 2001 16:09:14 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Wed, 28 Nov 2001 16:09:05 -0500 Received: from postfix2-2.free.fr ([213.228.0.140]:64128 "HELO postfix2-2.free.fr") by vger.kernel.org with SMTP id convert rfc822-to-8bit; Wed, 28 Nov 2001 16:08:51 -0500 Date: Wed, 28 Nov 2001 19:14:52 +0100 (CET) From: =?ISO-8859-1?Q?G=E9rard_Roudier?= X-X-Sender: To: Matthias Benkmann Cc: Subject: Re: sym53c875: reading /proc causes SCSI parity error In-Reply-To: <3C053AF2.10037.4CCE47@localhost> Message-ID: <20011128184622.N2255-100000@gerard> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=ISO-8859-1 Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org This is a known issue that had been discussed in time, but no fix had been considered worth to be applied by PCI et co maintainers. Up to the sym53c895, the Symbios chips have IO registers mapped at offset 0x80 of the chip configuration space. When you blindly read /proc with enough system priviledge, it happens that configuration space of all PCI devices are read beyond this offset. Since some IO registers of the chip have side effects on read, unpredicable behaviour does happen. For once, Murphy's law does not apply to you:). The reading of the SBDL (SCSI BUS DATA LINES) IO register of the chip causes a spurious SCSI parity error to be detected by the sym53c8xx and let it decide to reset everything, so limiting the risks of screwing up your file systems. By the way, the reasons that made the PCI stuff leave users of pre-sym53c895 chip run the risk of screwing up their file systems inadvertandly when reading /proc was some nit-picking about PCI specifications. Linux PCI guys decided that PCI configuration space reading must not have side effects even if PCI specifications did not explicitely stated so (Something like "configuration infers no side effects" is nothing but an axiom). It is clear that NCR/SYMBIOS ingenieers decision to map IO registers windows in PCI configuration space was very unclever an idea, but it didn't conflict with the PCI specifications that were existing at the time such chips had been designed. Newer chips have had this misfeature fixed. In result, avoid to blindly read from /proc on your system, or purchase a HBA with a recent chip that doesn't expose to side effects on PCI configuration reading. G?rard. On Wed, 28 Nov 2001, Matthias Benkmann wrote: > I have a reproducible problem that somehow reading from /proc causes a > SCSI parity error. > > When I am inside a chroot environment (on my IDE hard disk) with proc > mounted on /proc and execute the following script from / (of chroot) > > ----------------------- > #!/bin/sh > > case "z$1" in > z) echo Finding > find . -path "./old-distro" -prune -or -path "./static" -prune -or - > path "./usr/src" -prune -or -type f -exec $0 {} \; > ;; > *) strings $1 | grep -q /static || exit 0 > echo '*************'$1'****************' > strings $1 | grep -A 3 -B 3 /static > ;; > esac > > exit 0 > ---------------------- > > and then (not concurrently, can be a minute later) access my SCSI hard > disk, I get > > sym53c875-0: SCSI parity error detected: SCR1=132 DBC=1e000000 SBCL=26 > sym53c875-0: restart (scsi reset). > sym53c875-0: Downloading SCSI SCRIPTS. > > > When I access my SCSI hard disk first and use the script afterwards (again > there can be some time in between), I get > > sym53c875-0: SCSI parity error detected: SCR1=132 DBC=50000000 SBCL=0 > sym53c875-0: SCSI parity error detected: SCR1=132 DBC=870b0000 SBCL=0 > sym53c875-0:0: ERROR (81:0) (8-0-0) (f/95) @ (script 28:f31c0004). > sym53c875-0: script cmd = e21c0004 > sym53c875-0: regdump: da 00 00 95 47 0f 00 0f 35 08 80 00 80 00 0f 02. > sym53c875-0: restart (scsi reset). > sym53c875-0: Downloading SCSI SCRIPTS. > > > I can repeat this as often as I want. The errors stop occuring when I > unmount /proc (inside chroot). I can only guess that somehow reading from > /proc (note that I forgot to prune /proc in the find command) causes the > error. Are there some files in /proc that are not safe for reading? > And why does it only occur in chroot? > > The error occurs with my normal 2.2.17 kernel and with the 2.4.12-ac3 > kernel. I have a Tekram DC 390U SCSI controller. > > MSB > > Linux version 2.2.17 (root@(none)) (gcc version 2.95.2 19991024 (release)) > #1 Fri Feb 2 14:06:58 CET 2001 > Detected 501122 kHz processor. > Console: colour VGA+ 80x25 > Calibrating delay loop... 999.42 BogoMIPS > Memory: 257900k/262128k available (940k kernel code, 412k reserved, 2808k > data, 68k init) > Dentry hash table entries: 32768 (order 6, 256k) > Buffer cache hash table entries: 262144 (order 8, 1024k) > Page cache hash table entries: 65536 (order 6, 256k) > CPU: L1 I Cache: 32K L1 D Cache: 32K > CPU: AMD-K6(tm) 3D processor stepping 0c > Checking 386/387 coupling... OK, FPU using exception 16 error reporting. > Checking 'hlt' instruction... OK. > POSIX conformance testing by UNIFIX > mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au) > PCI: PCI BIOS revision 2.10 entry at 0xf0720 > PCI: Using configuration type 1 > PCI: Probing PCI hardware > Linux NET4.0 for Linux 2.2 > Based upon Swansea University Computer Society NET3.039 > NET4: Unix domain sockets 1.0 for Linux NET4.0. > NET4: Linux TCP/IP 1.0 for NET4.0 > IP Protocols: ICMP, UDP, TCP > TCP: Hash tables configured (ehash 262144 bhash 65536) > Starting kswapd v 1.5 > Serial driver version 4.27 with no serial options enabled > ttyS00 at 0x03f8 (irq = 4) is a 16550A > ttyS01 at 0x02f8 (irq = 3) is a 16550A > es1370: version v0.31 time 14:08:53 Feb 2 2001 > es1370: found adapter at io 0xd800 irq 15 > es1370: features: joystick off, line in, mic impedance 0 > RAM disk driver initialized: 16 RAM disks of 4096K size > loop: registered device at major 7 > Uniform Multi-Platform E-IDE driver Revision: 6.30 > ide: Assuming 33MHz system bus speed for PIO modes; override with > idebus=xx > ALI15X3: IDE controller on PCI bus 00 dev 78 > ALI15X3: chipset revision 193 > ALI15X3: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio > ALI15X3: simplex device: DMA disabled > ide1: ALI15X3 Bus-Master DMA disabled (BIOS) > hda: ST340823A, ATA DISK drive > ide: Assuming 33MHz system bus speed for PIO modes; override with > idebus=xx > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > hda: ST340823A, 38166MB w/512kB Cache, CHS=4865/255/63, UDMA(33) > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > sym53c8xx: at PCI bus 0, device 10, function 0 > sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) > sym53c8xx: 53c875 detected with Tekram NVRAM > sym53c875-0: rev=0x03, base=0xd6000000, io_port=0xd400, irq=12 > sym53c875-0: Tekram format NVRAM, ID 7, Fast-20, Parity Checking > sym53c875-0: on-chip RAM at 0xd5800000 > sym53c875-0: restart (scsi reset). > sym53c875-0: Downloading SCSI SCRIPTS. > scsi0 : sym53c8xx - version 1.3g > scsi : 1 host. > Vendor: IBM Model: DDRS-34560 Rev: S97B > Type: Direct-Access ANSI SCSI revision: 02 > Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 > Vendor: FUJITSU Model: M2513E Rev: 0040 > Type: Optical Device ANSI SCSI revision: 02 > Detected scsi removable disk sdb at scsi0, channel 0, id 1, lun 0 > Vendor: TEAC Model: CD-ROM CD-532S Rev: 1.0A > Type: CD-ROM ANSI SCSI revision: 02 > Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0 > sym53c875-0-<0,0>: tagged command queue depth set to 8 > scsi : detected 1 SCSI cdrom 2 SCSI disks total. > sym53c875-0-<3,*>: FAST-20 SCSI 20.0 MB/s (50 ns, offset 16) > sr0: scsi3-mmc drive: 0x/0x caddy > Uniform CD-ROM driver Revision: 3.11 > sym53c875-0-<0,*>: FAST-20 SCSI 20.0 MB/s (50 ns, offset 15) > SCSI device sda: hdwr sector= 512 bytes. Sectors= 8925000 [4357 MB] [4.4 > GB] > sym53c875-0-<1,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 15) > sdb : READ CAPACITY failed. > sdb : status = 1, message = 00, host = 0, driver = 28 > sdb : extended sense code = 2 > sdb : block size assumed to be 512 bytes, disk size 1GB. > ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker > http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html > ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0xd000, IRQ 10. > eth0: RealTek RTL-8029 found at 0xd000, IRQ 10, 00:00:21:C6:1E:30. > Partition check: > sda: sda1 sda2 < sda5 sda6 sda7 > > sdb:scsidisk I/O error: dev 08:10, sector 0 > unable to read partition table > hda: hda1 hda2 > VFS: Mounted root (ext2 filesystem) readonly. > Freeing unused kernel memory: 68k freed > Adding Swap: 72256k swap-space (priority -1) > strings uses obsolete /proc/pci interface > > > > ---- > Indecision is the key to flexibility. > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/